Search NASA⌕ Search

Engineering topics

Zhao, Kun

Publications and source records attributed to Zhao, Kun.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Energetics of Cu Adsorption on and Adhesion to Rutile-TiO 2 (100) Studied by Cu Vapor Adsorption Calorimetry

The heat of adsorption of Cu vapor versus coverage was measured on rutile-TiO 2 (100) at 300 and 100 K using single-crystal adsorption calorimetry. At these conditions, Cu nanoparticles nucleate and then grow larger. The average Cu particle size versus Cu coverage was measured using He + low-energy ion scattering spectroscopy. These data were analyzed with the recently introduced spherical cap model (SCM) to provide the heat of Cu adsorption and Cu chemical potential versus Cu particle size, as well as the contact angle (67°) and adhesion energy (2.50 J/m 2 ) at the Cu particle/rutile-TiO 2 (100) interface. The hemispherical cap model (HCM) was used to model the data first, and then those HCM results were converted to the more accurate SCM results using a recently published mathematical approximation whose high accuracy was validated here. Furthermore, the adhesion energy of Cu on rutile-TiO 2 (100) measured here is compared to prior values for Ag and Au on rutile-TiO 2 (100), showing a nearly proportional increase in adhesion energy with metal oxophilicity (per unit area).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of ground-state charge transfer on photoexcited charge transfer in transition metal dichalcogenide heterostructures

We report an experimental investigation on the effect of ground-state charge transfer and its induced electric field on photoexcited charge transfer in van der Waals heterostructures. Two heterostructure samples were fabricated by stacking an undoped WSe 2 monolayer with either a Nb-doped or undoped MoSe 2 monolayer. While no ground-state charge transfer is expected in the MoSe 2 /WSe 2 heterostructure, the doped holes in the MoSe 2 :Nb/WSe 2 heterostructure can transfer to WSe 2 , creating a space-charge electric field. By comparing the photoluminescence and time-resolved differential reflectance of the two heterostructures, we find that photoexcited hole transfer from MoSe 2 to WSe 2 is largely blocked by this field, whereas photoexcited electron transfer from WSe 2 to MoSe 2 is less affected. Furthermore, these results provide insight into the impact of doping on the charge-transfer performance of van der Waals heterostructures.

2D materials↗
DOE OSTI2024

Predicting Adhesion Energies of Metal Nanoparticles to Support Surfaces, Which Determines Metal Chemical Potential versus Particle Size and Thus Catalyst Performance

Improved catalysts and electrocatalysts composed of transition metal nanoparticles dispersed on high-area supports are essential for energy and environmental technologies. The chemical potential of the metal atoms in these supported nanoparticles is an important descriptor that correlates with both their catalytic activity and deactivation rate. This descriptor (μ M ) is predictably determined by the particle size and the adhesion energy per unit area at the metal/support interface (E adh ). We show here that the adhesion energies for different metals on a given support scale linearly with a simple property of the metal: for oxides, it is proportional to the metal oxophilicity, and for the carbon support, it increases linearly with metal carbophilicity (both divided by the area per metal atom). Furthermore, these relationships allow predicting E adh for other metal/support combinations, thus allowing estimation of μ M versus particle size and thereby better structure-based predictions of catalysts’ performance, which can aid in designing improved catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Calorimetric Energies and Chemical Potentials of Metal Atoms in Catalytic Nanoparticles on Oxide and Carbon Supports: Improved Size Dependencies and Adhesion Energies

The chemical potential of metal atoms, μM, in supported metal nanoparticles is an important descriptor related to both the catalytic activity and the stability of the nanoparticles. Here, we derive an expression relating μM to the radius of the particle’s contact area with the support and the adhesion energy at the metal/support interface (E adh ) that assumes the particles have the shape of spherical caps but of arbitrary contact angle with the support (θ c ) and includes an empirical correction for the increase in metal surface energy and adhesion energy with decreasing radius of curvature. We then show that, at any assumed contact angle, we can simultaneously fit previously reported measurements of both calorimetric μ M (from heats of metal vapor adsorption during nanoparticle growth by vapor deposition) versus metal coverage data and the He + low-energy ion scattering (LEIS) intensities for the metal and/or support versus metal coverage (using our recently developed spherical cap model for quantitative LEIS intensities), to determine the particle size versus coverage and E adh . Only one choice of contact angle gives a pair of values for contact angle and E adh , which is consistent with the Young–Dupré equation for the equilibrium shape of a spherical particle. At this equilibrium shape, we then applied this spherical cap model (SCM) to reanalyze microcalorimetric metal chemical potentials and LEIS signals versus coverage data for nine metal/support combinations that were previously analyzed by assuming that the particles had the shape of hemispherical caps, i.e., with a contact angle of 90°. We show that this revised approach gives close agreement with the calorimetric and LEIS data; the best-fit contact angles vary from 64 to 84°, correcting the earlier assumption of 90°. Furthermore, these results provide significant accuracy improvements in particle size versus coverage, metal chemical potential versus size and coverage, metal/support adhesion energies and contact angles for Cu, Ag and Au on CeO 2 (111), Ni on MgO(100), Ag on Fe 3 O 4 (111) and TiO 2 (100), and Ag, Ni and Pd on Ni-supported graphene. This revised approach is much more broadly applicable than the earlier hemispherical cap model (HCM).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Low-Energy Ion Scattering Intensities from Supported Nanoparticles: The Spherical Cap Model

Supported nanoparticles are of great importance to many technologies like fuel processing and chemical synthesis using catalysts and electrocatalysts, energy storage and generation using fuel cells and batteries, electrochemistry, magnetic information storage, and more. Low-energy ion scattering spectroscopy (LEIS) with noble gas ions like He+ is a powerful tool for the characterization of nanoparticles dispersed across flat support surfaces due to its ability to probe the elemental composition in the topmost atomic layer of a surface, providing quantitative information regarding the size and number density of nanoparticles. In this work, we present a derivation of the LEIS intensities expected from nanoparticles and the support material as a function of the average particle size, their number per unit area, and their contact angle with the support when modeled as spherical caps of the nanoparticle material dispersed over the surface of a flat support. The model assumes that the ion intensities are determined only by the physical blocking of linear ion trajectories and independent of the tilt angle of the local surface relative to the incident and scattered ion directions, an assumption we support by quantitative modeling of published data which tested tilt-angle effects. The model is a generalization to arbitrary contact angles of the hemispherical cap model, which assumes 90° contact angle and has been widely used to model spectroscopic signals in LEIS (and also in Auger and photoelectron spectroscopies) during nanoparticle growth. Here, this new model quantitatively reveals how LEIS signals are sensitive not only to the diameter and number density of the nanoparticle but also to their contact angle (or height/diameter ratio). With the use of additional data (e.g., from microscopy or adsorption microcalorimetry), the model presented here will enable more accurate determination of the average size, shape, and number density of supported nanoparticles based on LEIS intensity measurements.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Size-Dependent Energy and Adhesion of Pd Nanoparticles on Graphene on Ni(111) by Pd Vapor Adsorption Calorimetry

Carbon-supported late transition-metal nanoparticles are promising catalysts and electrocatalysts for wide-ranging applications. However, experimental investigations of the bonding energetics of metal nanoparticles on carbon supports are very limited. Here, in this work, we report heats of adsorption of Pd vapor deposited onto single-layer graphene(0001) supported on Ni(111) at 100 and 300 K as Pd grows particles of well-defined size in the range from three atom clusters to 6 nm diameter. Sizes were determined from He + low-energy ion scattering (LEIS). In this size range, the differential heat of Pd adsorption increases from 228 kJ/mol to within 10 kJ/mol of the heat of sublimation of bulk Pd (377 kJ/mol). The chemical potential of metal atoms in these nanoparticles as a function of average particle size was determined from these results. The adhesion energy at the Pd/graphene(0001)/Ni(111) interface was extracted from these data and found to be 3.5 J/m 2 for the largest Pd particles. For the three metal elements that have now been studied (Pd, Ni, and Ag), we found an increase in metal/graphene(0001)/Ni(111) adhesion energy with metal carbophilicity, which we defined here as the heat of C atom adsorption on that metal’s (111) surface estimated from published density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Size-Dependent Energy of Ni Nanoparticles on Graphene Films on Ni(111) and Adhesion Energetics by Adsorption Calorimetry

The use of carbon supports for late transition-metal nanoparticle catalysts has grown substantially in recent years due to efforts to develop electrocatalysts for clean energy applications and catalysts for new aqueous-phase biomass-related conversions and due to the evolution of new carbon materials with unique properties (e.g., graphene, carbon nanotubes, and so forth). However, much less is known about the bonding energetics of catalytic metal nanoparticles on carbon supports in comparison with oxide supports, which are more common for thermal catalysis. Here, we report the growth morphology and heats of adsorption of Ni vapor deposited onto graphene/Ni(111) at 300 K and 100 K using metal vapor single-crystal adsorption calorimetry and He + low-energy ion scattering (LEIS). These results provide the Ni chemical potential versus particle size, and the Ni/graphene adhesion energy. LEIS intensities suggest that Ni grows as flat-topped face-centered cubic islands with a nearly constant thickness of ~1.5 nm when deposited at 300 K. At 100 K, Ni grows as smaller nanoparticles, well modeled as hemispherical hexagonal close-packed nanoparticles with a density of ~2 × 10 16 particles/m 2 . The Ni chemical potential as a function of average particle diameter in the 0.5 to 4 nm range at 100 K was determined from the heats of Ni gas adsorption. Further, by fitting the measured chemical potential as a function of diameter, we determined an adhesion energy of 3.6 J/m 2 for large Ni particles on graphene/Ni(111). This adhesion energy is in good agreement with previous scanning tunneling microscopy and density functional theory investigations of Ni/graphene/Ni(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploration of two surfaces observed in Weyl semimetal BaMnSb 2

Single crystalline BaMnSb 2 is considered as a 3D Weyl semimetal with the 2D electronic structure containing Dirac cones from the Sb sheet. We report experimental investigation of low-temperature cleaved BaMnSb 2 surfaces using scanning tunneling microscopy/spectroscopy and low energy electron diffraction. By natural cleavage, we find two terminations: one is Ba (above the orthorhombically distorted Sb sheet) and another Sb2 (at the surface of the Sb/Mn/Sb sandwich layer). Both terminations show the 2×1 surface reconstructions, with drastically different morphologies and electronic properties, however. The reconstructed structures, defect types and nature of the electronic structures of the two terminations are extensively studied. The quasiparticle interference (QPI) analysis is conducted at the energy range between -2 V and 2 V, although no interesting states are observed near the Fermi level, the surface-projected electronic band structures strongly depend on the surface termination above 1.6 V. The existence of defects can greatly modify the local density of states to create electronic phase separations on the surface in the order of tens of nm scale. Our observation on the atomic structures of the terminations and the corresponding electronic structures provides critical information towards an understanding of topological properties of BaMnSb 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrafast charge transfer and carrier dynamics in a WS 2 /MoSe 2 few-layer van der Waals heterostructure

Photocarrier dynamics including interlayer charge transfer and intralayer valley scattering are studied in a heterostructure formed by trilayer WS 2 and MoSe 2 . The sample is fabricated by mechanical exfoliation and dry transfer and characterized by atomic force microscopy, Raman spectroscopy, and photoluminescence measurements. The conduction band minima of the two materials are nearly degenerate, representing a unique band alignment. Layer-selective pump–probe measurements are performed with three configurations to reveal a complete picture of the photocarrier dynamics. By comparing the heterostructure with the two individual trilayer materials in each experimental configuration, ultrafast interlayer charge transfer is unambiguously observed, which occurs on the same time scale as the intralayer valley scattering of the photocarriers. The quasi-equilibrium distribution of electrons in the two layers mediate the fast carrier recombination process. Furthermore, these results show that the band structures of the few-layer transition metal dichalcogenides can enable rich photocarrier dynamics with intermediate band alignments that are complementary to the previously studied monolayer–monolayer heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Assimilation of X-band Phased-Array Radar Data with EnKF for the Analysis and Warning Forecast of a Tornadic storm

The impact of assimilating China's operational X-band Phased-Array radar's (X-PAR) data on the analysis and warning forecast of the vortex structure and intensity of the June 8, 2018 Foshan, Guangdong province, tornadic storm was investigated for the first time using an Ensemble Kalman Filter (EnKF) data assimilation system. Both radar radial velocity (Vr) and reflectivity (Z) from two S-band operational radars and one X-PAR were assimilated. Deterministic forecasts were launched every 6 min from 05:42 UTC (20 min before the tornado touched down) to 06:00 UTC from the EnKF mean analysis field. Five experiments were conducted to examine the added capability of Z assimilation of the EnKF system, and to investigate the impact of assimilating X-PAR data on the analysis and prediction of the tornadic storm. Compared to the experiment without Z assimilation, the assimilation of Z reduced the analysis error and greatly reduced the forecast error of Z. Furthermore, the assimilation of X-PAR data greatly improved the vortex structure of the tornadic storm at low levels, and improved the intensity of the rear inflow of the tornadic storm, especially with a higher assimilation frequency. Compared to the experiments without X-PAR data assimilation, assimilating X-PAR data improved the predictability of tornadic storm.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Tuning Irreversible Magnetoresistance in Pr 0.67 Sr 0.33 MnO 3 Film via Octahedral Rotation

Herein, the oxygen octahedral rotation around the out-of-plane axis is explored to study its effect on metastable status, magnetic cluster glass in manganite. The antiphase rotation around the out-of-plane axis (TiO 6 α Ο α Ο c – ) of SrTiO 3 enhances the Mn–O bond anisotropy along in-plane and out-of-plane directions and weakens the ferromagnetic interactions in a 12 nm Pr 0.67 Sr 0.33 MnO 3 film on the (001) SrTiO 3 substrate, which together promote the formation of magnetic cluster-glassiness and enlarges the irreversible magnetoresistance (MR) effect with enhanced relaxation time of charge carriers. The effect of TiO 6 α Ο α Ο c – in the SrTiO 3 substrate on material properties is obvious with a large irreversible MR effect for thin films, which fades away with the increase in film thickness. At 10 K, the irreversible MR is 0.91 for the 12 nm film and 0.22 for the 30 nm film. This work extends current understanding on interfacial coupling to metastable status and could help explore other systems in the perovskite structure with octahedral rotation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A molten carbonate shell modified perovskite redox catalyst for anaerobic oxidative dehydrogenation of ethane

Acceptor-doped, redox-active perovskite oxides such as La 0.8 Sr 0.2 FeO 3 (LSF) are active for ethane oxidation to CO x but show poor selectivity to ethylene. This article reports molten Li 2 CO 3 as an effective “promoter” to modify LSF for chemical looping–oxidative dehydrogenation (CL-ODH) of ethane. Under the working state, the redox catalyst is composed of a molten Li 2 CO 3 layer covering the solid LSF substrate. The molten layer facilitates the transport of active peroxide (O 2 2- ) species formed on LSF while blocking the nonselective sites. Spectroscopy measurements and density functional theory calculations indicate that Fe 4+ →Fe 3+ transition is responsible for the peroxide formation, which results in both exothermic ODH and air reoxidation steps. With >90% ethylene selectivity, up to 59% ethylene yield, and favorable heat of reactions, the core-shell redox catalyst has an excellent potential to be effective for intensified ethane conversion. The mechanistic findings also provide a generalized approach for designing CL-ODH redox catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗