Search NASA⌕ Search

Engineering topics

Zhao, Li

Publications and source records attributed to Zhao, Li.

At least 19 records

Search for Solar Boosted Dark Matter Particles at the PandaX-4T Experiment

We present a novel constraint on light dark matter utilizing 1.54 metric ton/year of data acquired from the PandaX-4T dual-phase xenon time projection chamber. This constraint is derived through detecting electronic recoil signals resulting from the interaction with solar-enhanced dark matter flux. Low-mass dark matter particles, lighter than a few MeV / c 2 , can scatter with the thermal electrons in the Sun. Consequently, with higher kinetic energy, the boosted dark matter component becomes detectable via contact scattering with xenon electrons, resulting in a few keV energy deposition that exceeds the threshold of PandaX-4T. We calculate the expected recoil energy in PandaX-4T considering the Sun’s acceleration with heavy mediators and the detection capabilities of the xenon detector. The first experimental search results using the xenon detector yield the most stringent upper limits cross section of 3.51 × 10 − 39 cm 2 at 0.08 MeV / c 2 for a solar boosted dark matter mass ranging from 0.02 to 10 MeV / c 2 , achieving a 23-fold improvement compared with earlier experimental studies. Published by the American Physical Society 2025

Shen, Guofang↗

Vimentin loss promotes cancer proliferation through up-regulating Rictor/AKT/β-catenin signaling pathway

Vimentin protein is one of the main cytoskeleton and plays an important role in cell motility and metastasis. Nowadays, vimentin is widely studied as an epithelial-mesenchymal transition (EMT) marker of cancer cells while its involvement in cancer proliferation is poorly understood. In this study, we investigated the participation of vimentin in regulating cancer proliferation by silencing VIM gene in four cancer cell lines. Our results demonstrated that vimentin loss significantly induced cancer cell proliferation both in vitro and in vivo, which has not been reported so far. Mechanistically, knockdown of vimentin expression activated AKT phosphorylation and its downstream β-catenin signaling. Nuclear translocation and transcriptional activity of β-catenin was enhanced after silencing vimentin expression. Furthermore, vimentin loss could prevent Rictor from autophagy-dependent degradation via reducing AMPK-mediated autophagy signaling. AICAR, an AMPK activator, down-regulated Rictor and p-AKT levels while vimentin knockdown could rescue the effects. In vivo, it was also found that Ki67 expression and p-AKT/β-catenin signaling pathway were obviously up-regulated in the tumor tissues in which vimentin was silenced compared to control groups. Taken together, these data showed the novel function of vimentin in regulating cancer proliferation via Rictor/AKT/β-catenin signaling pathway, which suggested that it need more careful consideration before inhibiting metastatic cancers through targeting vimentin.

60 APPLIED LIFE SCIENCES↗

Constraining self-interacting dark matter with the full dataset of PandaX-II

Self-interacting dark matter (SIDM) is a leading candidate proposed to solve discrepancies between predictions of the prevailing cold dark matter theory and observations of galaxies. Many SIDM models predict the existence of a light force carrier that mediates strong dark matter self-interactions. If the mediator couples to the standard model particles, it could produce characteristic signals in dark matter direct detection experiments. We report searches for signals of SIDM models with a light mediator using the full dataset of the PandaX-II experiment, basing on a total exposure of 132 tonne-days. No significant excess over background is found, and our likelihood analysis leads to a strong upper limit on the dark matter-nucleon coupling strength. We further combine the PandaX-II constraints and those from observations of the light element abundances in the early universe, and show that direct detection and cosmological probes can provide complementary constraints on dark matter models with a light mediator.

79 ASTRONOMY AND ASTROPHYSICS↗

All Electrospray Printing of Carbon–Based Cost–Effective Perovskite Solar Cells

With the power conversion efficiencies of PSCs exceeding 25%, the perovskite solar cells (PSCs) are closer to step into the initial industrialization. Prior to transferring from laboratory fabrication to industrial manufacturing, issues such as scalability, materials cost, and production line compatibility that significantly impact the manufacturing remain to be addressed. Here we report breakthroughs on all these fronts. Carbon-based PSCs with architecture FTO/electron transport layer/perovskite/carbon, that eliminate the need for the hole transport layer and noble metal electrode, provide ultra-low-cost configuration. This PSC architecture was manufactured using a scalable and industrially compatible electrospray (ES) technique, which enables continuous printing of all the cell layers. The ES deposited electron transport layer and perovskite layer exhibited properties comparable to that of the laboratory-scale spin coating method. The ES deposited carbon electrode layer exhibited superior conductivity and interfacial microstructure in comparison to films synthesized using the conventional doctor blading technique. As a result, the fully ES printed carbon-based PSCs showed a record 14.41% power conversion efficiency, rivaling the state-of-the-art hole transporter-free PSCs. Furthermore, these results will immediately have an impact on the scalable production of PSCs.

14 SOLAR ENERGY↗

PandaX-II constraints on spin-dependent WIMP-nucleon effective interactions

We present PandaX-II constraints on candidate WIMP-nucleon effective interactions involving the nucleon or WIMP spin, including, in addition to standard axial spin-dependent (SD) scattering, various couplings among vector and axial currents, magnetic and electric dipole moments, and tensor interactions. The data set corresponding to a total exposure of 54-ton-days is reanalyzed to determine constraints as a function of the WIMP mass and isospin coupling. We obtain WIMP-nucleon cross section bounds of 1.6 x 10 –41 cm 2 and 9.0 x 10 –42 cm 2 (90% c.l.) for neutron-only SD and tensor coupling, respectively, for a mass M WIMP ~ 40 GeV/c 2 . The SD limits are the best currently available for M WIMP > 40 GeV/c 2 . We show that PandaX-II has reached a sensitivity sufficient to probe a variety of other candidate spin-dependent interactions at the weak scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Aromatic 3,5-Di(2′,4′-dicarboxylphenyl)benozoic acid based coordination polymers as luminescent sensor for the sensitive detection of chromate anions in aqueous solution

Highlights: • The novel pentacarboxylate of 3,5-di(2′,4′-dicarboxylphenyl)benozoic acid were firstly introduced here. • Topology analyses reveal that complex 1 is a 2D {6"3}{sub 2}{6"4.8.10}{6"4.8"2}{sub 2} trilayer structure, and complex 2 is a 3D {6.8"2}{sub 2}{6"4.8"2}{sub 2}{8.10"4.12} network. • Two coordination polymers both show highly sensitive sensing of Cr(VI) anions in aqueous solution. - Abstract: Based on the mixed ligands of aromatic pentacarboxylate of 3,5-di(2′,4′-dicarboxylphenyl)benozoic acid (H{sub 5}L) and 1,4-bis(imidazol-1-yl) benzene (bib), two novel coordination polymers, namely, [Ni{sub 1.5}(H{sub 2}L)(bib){sub 1.5}(H{sub 2}O){sub 2}]{sub n} (1), and {[Pb_2(HL)(bib)_1_._5(H_2O)]·H_2O}{sub n} (2) have been synthesized and characterized by EA, IR, TG, PXRD. Structure analyses reveal that complexes 1 and 2 are both (3,4,4)-connected structures with the same stoichiometry of (3-c){sub 2}(4-c){sub 2}(4-c), the 2D {6"3}{sub 2}{6"4.8.10}{6"4.8"2}{sub 2} trilayer for 1, and 3D {6.8"2}{sub 2}{6"4.8"2}{sub 2}{8.10"4.12} network for 2. Complexes 1 and 2 exhibit excellent recyclable, selective, and sensitive detection of Cr(VI) anions in aqueous solution. The possible mechanism for selective luminescence quenching responses toward Cr(VI) anions is also discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Characterization and Luminescent Properties of Anthracen- or Pyrene-Based Coumarin Derivatives

Three anthracen- or pyrene-based coumarin derivatives have been successfully synthesized and characterized by EA, IR and {sup 1}H NMR. The photophysical properties of all derivatives were investigated by UV-Vis and photoluminescence spectroscopic analysis. Their thermal stabilities were demonstrated by TGA. These compounds exhibit strong blue mission under ultraviolet light excitation and have potential possible to explore organic electroluminescent materials. The vacuum-processed doped devices with a configuration of ITO/TAPC (20 nm)/TBADN: b1 (x wt%, 30 nm)/TPBi (50 nm)/Liq (2 nm)/Al (150 nm) was fabricated, in which the devices based on b1 exhibited the best electroluminescence performance with a maximum brightness of 8165 cd/m{sup 2} and a maximum luminous efficiencies of 6.13 cd/A and a maximum external quantum efficiency (EQE) of 2.75%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of the RxLR effector PcRxLR12 from Phytophthora capsici

RxLR genes are a prominent class of effectors in oomycetes, and almost half of these proteins contain a conserved sequence motif termed the WY domain, that may exist singly, or as divergent tandem repeats in different effectors. Here we describe the crystal structure of PcRxLR12 (63-488) from Phytophthora capsici at 3.0 Å resolution. The structure consists of five tandemly arrayed WY-domains linked to each other by short connecting helices. Superposition of the WY-2 domain on the other four domains of PcRxLR12, show that the first α-helix termed the K motif, and Loop 3 which connects α{sub 3} and α{sub 4} are the key regions of structural divergence between the WY domains. A similar pattern was observed when WY-2 was superposed on the 11 WY domains from other oomycete effectors. We also note that an added connecting helix between WY domains in some RXLR effectors, ensures that the WY domains are oriented in the same direction.

60 APPLIED LIFE SCIENCES↗

Characterization of Pharmaceutical Cocrystals and Salts by Dynamic Nuclear Polarization-Enhanced Solid-State NMR Spectroscopy

Multicomponent solids such as cocrystals have emerged as a way to control and engineer the stability, solubility and manufacturability of solid active pharmaceutical ingredients (APIs). Cocrystals are typically formed by solution- or solid-phase reactions of APIs with suitable cocrystal coformers, which are often weak acids. One key structural question about a given multicomponent solid is whether it should be classified as a salt, where the basic API is protonated by the acid, or as a cocrystal, where the API and coformer remain neutral and engage in hydrogen bonding interactions. It has previously been demonstrated that solid-state NMR spectroscopy is a powerful probe of structure in cocrystals and salts of APIs, however, the poor sensitivity of solid-state NMR spectroscopy usually restricts the types of experiments that can be performed. Here relayed dynamic nuclear polarization (DNP) was applied to reduce solid-state NMR experiments by one to two orders of magnitude for salts and cocrystals of a complex API. The large sensitivity gains from DNP facilitates rapid acquisition of natural isotopic abundance 13C and 15N solid-state NMR spectra. Critically, DNP enables double resonance 1H-15N solid-state NMR experiments such as 2D 1H-15N HETCOR, 1H-15N CP-build up, 15N{1H} J-resolved/attached proton tests, 1H-15N DIPSHIFT and 1H-15N PRESTO. The latter two experiments allow 1H-15N dipolar coupling constants and H-N bond lengths to be accurately measured, providing an unambiguous assignment of nitrogen protonation state and definitive classification of the multi-component solids as cocrystals or salts. In conclusion, these types of measurements should also be extremely useful in the context of polymorph discrimination, NMR crystallography structure determination and for probing hydrogen bonding in a variety of organic materials.

36 MATERIALS SCIENCE↗

Localization of gravitino field on branes

In this paper, we investigate the localization of a bulk gravitino field on the scalar-tensor branes and compare the result with that in the Randall–Sundrum-1 (RS1) model. The coupled chiral equations for the Kaluza–Klein (KK) modes of the gravitino field are obtained by fixing the gauge Ψ{sub 5}=0 and using the chiral KK decompositions. It is shown that, in the RS1 model for the left- and right-handed zero modes of the gravitino field, only one of them can be localized near one brane. For the massive modes, both chiral modes survive and the lower KK modes are localized near the IR brane from the four-dimensional physical coordinate point of view. However, for the scalar-tensor brane model, the localization of the gravitino chiral zero modes depends on the coupling parameter λ, and they will be not localized around anyone brane within a certain range of the parameter λ, which is quite different from the RS1 model. Furthermore, we also give the corresponding mass spectra of the massive KK gravitinos in the scalar-tensor model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Heat Treatment on Corrosion and Wear Behaviors of Mg-6Gd-2Zn-0.4Zr Alloy in Simulated Body Fluid

Mg-6Gd-2Zn-0.4Zr (wt.%, GZ62K) alloy was processed by solution treatment under different temperatures. The microstructure, hardness, corrosion and wear behaviors in simulated body fluid (SBF) have been studied. The results indicate that the (Mg, Zn){sub 3}Gd phase decreases, the precipitated phases gradually increase, and the long-period stacking ordered structure disappears with the increase of solution temperature. The alloy has better corrosion resistance after solution treatment, and that solution treated at 490 °C for 12 h shows the best corrosion resistance. The friction coefficient of the alloy under dry sliding condition decreases slightly, but the mass loss increases with increasing the solution temperature. The alloy solution treated at 460 °C for 12 h exhibits the lowest friction coefficient and mass loss in SBF, and it also has the best wear resistance under dry sliding condition.

36 MATERIALS SCIENCE↗

Observing Formation of Flux Rope by Tether-cutting Reconnection in the Sun

Tether-cutting reconnection is considered as one mechanism for the formation of a flux rope. It has been proposed for more than 30 years; however, so far, direct observations of it are very rare. In this Letter, we present observations of the formation of a flux rope via tether-cutting reconnection in NOAA AR 11967 on 2014 February 2 by combining observations with the New Vacuum Solar Telescope and the Solar Dynamic Observatory . The tether-cutting reconnection occurs between two sets of highly sheared magnetic arcades. Comprehensive observational evidence of the reconnection is as follows: changes of the connections between the arcades, brightenings at the reconnection site, hot outflows, formation of a flux rope, slow-rise motion of the flux rope, and flux cancelation. The outflows are along three directions from the reconnection site to the footpoints with the velocities from 24 ± 1 km s{sup −1} to 69 ± 5 km s{sup −1}. Additionally, it is found that the newly formed flux rope connects far footpoints and has a left-handed twisted structure with many fine threads and a concave-up-shape structure in the middle. All the observations are in agreement with the tether-cutting model and provide evidence that tether-cutting reconnection leads to the formation of the flux rope associated with flux shear flow and cancelation.

79 ASTRONOMY AND ASTROPHYSICS↗