Search NASA⌕ Search

Engineering topics

Zhao, Long

Publications and source records attributed to Zhao, Long.

53 records · Page 3

Gas-Phase Synthesis of Triphenylene (C 18 H 12 )

For the last decades, the hydrogen-abstraction-acetylene-addition (HACA) mechanism has been widely invoked to rationalize the high-temperature synthesis of PAHs as detected in carbonaceous meteorites (CM) and proposed to exist in the interstellar medium (ISM). By unravelling the chemistry of the 9-phenanthrenyl radical ([C 14 H 9 ]$^\bullet$) with vinylacetylene (C 4 H 4 ) during our work, we present the first compelling evidence of a barrier-less pathway leading to a prototype tetracyclic PAH – triphenylene (C 18 H 12 ) – via an unconventional hydrogen abstraction–vinylacetylene addition (HAVA) mechanism operational at temperatures as low as 10 K. The barrier-less, exoergic nature of the reaction reveals HAVA as a versatile reaction mechanism that may drive molecular mass growth processes to PAHs and even two-dimensional, graphene-type nanostructures in cold environments in deep space thus leading to a better understanding of the carbon chemistry in our universe through the untangling of elementary reactions on the most fundamental level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature formation of polycyclic aromatic hydrocarbons in Titan’s atmosphere

The detection of benzene in Titan’s atmosphere led to the emergence of polycyclic aromatic hydrocarbons (PAHs) as potential nucleation agents triggering the growth of Titan’s orange-brownish haze layers. However, the fundamental mechanisms leading to the formation of PAHs in Titan’s low-temperature atmosphere have remained elusive. We provide persuasive evidence through laboratory experiments and computations that prototype PAHs like anthracene and phenanthrene (C 14 H 10 ) are synthesized via barrierless reactions involving naphthyl radicals (C 10 H 7 •) with vinylacetylene (CH 2 =CH–C≡CH) in low-temperature environments. These elementary reactions are rapid, have no entrance barriers, and synthesize anthracene and phenanthrene via van der Waals complexes and submerged barriers. This facile route to anthracene and phenanthrene—potential building blocks to complex PAHs and aerosols in Titan—signifies a critical shift in the perception that PAHs can only be formed under high-temperature conditions, providing a detailed understanding of the chemistry of Titan’s atmosphere by untangling elementary reactions on the most fundamental level.

79 ASTRONOMY AND ASTROPHYSICS↗

A Combined Experimental and Computational Study on the Reaction Dynamics of the 1-Propynyl (CH 3 CC)–Acetylene (HCCH) System and the Formation of Methyldiacetylene (CH 3 CCCCH)

We investigated the 1-propynyl (CH 3 CC; X 2 A 1 ) plus acetylene/acetylene-d 2 (HCCH/DCCD; X 1 Σg + ) under single-collision conditions using the crossed molecular beams method. The reaction was found to produce C 5 H 4 plus atomic hydrogen (H) via an indirect reaction mechanism with a reaction energy of -123 ± 18 kJ mol –1 . Using the DCCD isotopologue, we confirmed that the hydrogen atom is lost from the acetylene reactant. Our computational analysis suggests the reaction proceeds by the barrierless addition of the 1-propynyl radical to acetylene, resulting in C 5 H 5 intermediate(s) that dissociate preferentially to methyldiacetylene (CH 3 CCCCH; X 1 A 1 ) via hydrogen atom emission with a computed reaction energy of -123 ± 4 kJ mol –1 . The barrierless nature of this reaction scheme suggests the 1-propynyl radical may be a key intermediate in hydrocarbon chain growth in cold molecular clouds like TMC-1, where methyl-substituted (poly)acetylenes are known to exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VUV Photoionization Study of the Formation of the Simplest Polycyclic Aromatic Hydrocarbon: Naphthalene (C 10 H 8 )

The formation of the simplest polycyclic aromatic hydrocarbon (PAH), naphthalene (C 10 H 8 ), was explored in a high-temperature chemical reactor under combustion-like conditions in the phenyl (C 6 H 5 )-vinylacetylene (C 4 H 4 ) system. The products were probed utilizing tunable vacuum ultraviolet light by scanning the photoionization efficiency (PIE) curve at a mass-to-charge m/z = 128 (C 10 H 8 + ) of molecules entrained in a molecular beam. The data fitting with PIE reference curves of naphthalene, 4-phenylvinylacetylene (C 6 H 5 CCC 2 H 3 ), and trans -1-phenylvinylacetylene (C 6 H 5 CHCHCCH) indicates that the isomers were generated with branching ratios of 43.5±9.0: 6.5±1.0: 50.0±10.0%. Kinetics simulations agree nicely with the experimental findings with naphthalene synthesized via the hydrogen abstraction-vinylacetylene addition (HAVA) pathway and through hydrogen-assisted isomerization of phenylvinylacetylenes. In conclusion, the HAVA route to naphthalene at elevated temperatures represents an alternative pathway to the hydrogen abstraction-acetylene addition (HACA) forming naphthalene in flames and circumstellar envelopes, whereas in cold molecular clouds, HAVA synthesizes naphthalene via a barrierless bimolecular route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A combined crossed molecular beams and computational study on the formation of distinct resonantly stabilized C 5 H 3 radicals via chemically activated C 5 H 4 and C 6 H 6 intermediates

The crossed molecular beams technique was utilized to investigate the formation of three isomers of resonantly stabilized (C 5 H 3 ) radicals along with their d 2 -substituted counterparts via the bimolecular reactions of singlet/triplet dicarbon [C 2 (X 1 Σ + g /a 3 Π u )] with methylacetylene [CH 3 CCH(X 1 A 1 )], d 3 -methylacetylene [CD 3 CCH(X 1 A 1 )], and 1-butyne [C 2 H 5 CCH(X 1 A')] at collision energies up to 26 kJ mol -1 via chemically activated singlet/triplet C 5 H 4 /C 5 D 3 H and C 6 H 6 intermediates. These studies exploit a newly developed supersonic dicarbon [C 2 (X 1 Σ + g /a 3 Π u )] beam generated via photolysis of tetrachloroethylene [C 2 Cl 4 (X 1 A g )] by excluding interference from carbon atoms, which represent the dominating (interfering) species in ablation-based dicarbon sources. We assessed the performance of the dicarbon [C 2 (X 1 Σ + g /a 3 Π u )] beam in reactions with methylacetylene [CH 3 CCH(X 1 A 1 )] and d 3 -methylacetylene [CD 3 CCH(X 1 A 1 )]; the investigations demonstrate that the reaction dynamics match previous studies in our laboratory utilizing ablation-based dicarbon sources involving the synthesis of 1,4-pentadiynyl-3 [HCCCHCCH(X 2 B 1 )] and 2,4-pentadiynyl-1 [H 2 CCCCCH(X 2 B 1 )] radicals via hydrogen (deuterium) atom elimination. Considering the C 2 (X 1 Σ + g /a 3 Π u )–1-butyne [C 2 H 5 CCH(X 1 A')] reaction, the hitherto elusive methyl-loss pathway was detected. This channel forms the previously unknown resonantly stabilized penta-1-yn-3,4-dienyl-1 [H 2 CCCHCC(X 2 A)] radical along with the methyl radical [CH 3 (X 2 A 2 ")] and is open exclusively on the triplet surface with an overall reaction energy of -86 ± 10 kJ mol -1 . The preferred reaction pathways proceed first by barrierless addition of triplet dicarbon to the π-electronic system of 1-butyne, either to both acetylenic carbon atoms or to the sterically more accessible carbon atom, to form the methyl-bearing triplet C 6 H 6 intermediates [ i4 1b ] and [ i8 1b ], respectively, with the latter decomposing via a tight exit transition state to penta-1-yn-3,4-dienyl-1 [(H 2 CCCHCC(X 2 A)] plus the methyl radical [CH 3 (X 2 A 2 ")]. The successful unraveling of this methyl-loss channel – through collaborative experimental and computational efforts – underscores the viability of the photolytically generated dicarbon beam as an unprecedented tool to access reaction dynamics underlying the formation of resonantly stabilized free radicals (RSFR) that are vital to molecular mass growth processes that ultimately lead to polycyclic aromatic hydrocarbons (PAHs)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyrene synthesis in circumstellar envelopes and its role in the formation of 2D nanostructures

For the past decades, the hydrogen-abstraction/acetylene-addition (HACA) mechanism has been instrumental in attempting to untangle the origin of polycyclic aromatic hydrocarbons (PAHs) as identified in carbonaceous meteorites such as Allende and Murchison. However, the fundamental reaction mechanisms leading to the synthesis of PAHs beyond phenanthrene (C 14 H 10 ) are still unknown. By exploring the reaction of the 4-phenanthrenyl radical (C 14 H 9 •) with acetylene (C 2 H 2 ) under conditions prevalent in carbon-rich circumstellar environments, we show evidence of a facile, isomer-selective formation of pyrene (C 16 H 10 ). Along with the hydrogen-abstraction/vinylacetylene-addition (HAVA) mechanism, molecular mass growth processes from pyrene may lead through systematic ring expansions not only to more complex PAHs, but ultimately to 2D graphene-type structures. Lastly, these fundamental reaction mechanisms are crucial to facilitate an understanding of the origin and evolution of the molecular universe and, in particular, of carbon in our Galaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A vacuum ultraviolet photoionization study on the thermal decomposition of ammonium perchlorate

Pyrolysis products of ammonium perchlorate (NH 4 ClO 4 ) at 483 K were monitored on line and in situ via single photon photoionization reflectron time-of-flight spectrometry (PI-ReTOF-MS) in the photon energy range of 9.00–17.50 eV. The photoionization efficiency curves (PIE) of the subliming product molecules were collected and allowed for detection of three class of products containing chlorine, nitrogen, and oxygen including atoms and free radicals. The results found suggest a new insight into possible low-temperature decomposition pathways of NH 4 ClO 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas‐Phase Synthesis of the Elusive Cyclooctatetraenyl Radical (C 8 H 7 ) via Triplet Aromatic Cyclooctatetraene (C 8 H 8 ) and Non‐Aromatic Cyclooctatriene (C 8 H 8 ) Intermediates

Abstract The 1,2,4,7‐cyclooctatetraenyl radical (C 8 H 7 ) has been synthesized for the very first time via the bimolecular gas‐phase reaction of ground‐state carbon atoms with 1,3,5‐cycloheptatriene (C 7 H 8 ) on the triplet surface under single‐collision conditions. The barrier‐less route to the cyclic 1,2,4,7‐cyclooctatetraenyl radical accesses exotic reaction intermediates on the triplet surface, which cannot be synthesized via classical organic chemistry methods: the triplet non‐aromatic 2,4,6‐cyclooctatriene (C 8 H 8 ) and the triplet aromatic 1,3,5,7‐cyclooctatetraene (C 8 H 8 ). Our approach provides a clean gas‐phase synthesis of this hitherto elusive cyclic radical species 1,2,4,7‐cyclooctatetraenyl via a single‐collision event and opens up a versatile, unconventional path to access this previously largely obscure class of cyclooctatetraenyl radicals, which have been impossible to access through classical synthetic methods.

Lucas, Michael↗

A vacuum ultraviolet photoionization study on high-temperature decomposition of JP-10 (exo-tetrahydrodicyclopentadiene)

Here, two sets of experiments were performed to unravel the high-temperature pyrolysis of tricyclo[5.2.1.02,6] decane (JP-10) exploiting high-temperature reactors over a temperature range of 1100 K to 1600 K, Advanced Light Source (ALS), and 927 K to 1083 K, National Synchrotron Radiation Laboratory (NSRL), with residence times of a few tens of microseconds (ALS) to typically 144 ms (NSRL). The products were identified in situ in supersonic molecular beams via single photon vacuum ultraviolet (VUV) photoionization coupled with mass spectroscopic detection in a reflectron time-of-flight mass spectrometer (ReTOF). These studies were designed to probe the initial (ALS) and also higher order reaction products (NSRL) formed in the decomposition of JP-10 – including radicals and thermally labile closed-shell species. Altogether 43 products were detected and quantified including C1–C4 alkenes, dienes, C3–C4 cumulenes, alkynes, eneynes, diynes, cycloalkenes, cyclo-dienes, aromatic molecules, and most importantly, radicals such as ethyl, allyl, and methyl produced at shorter residence times. At longer residence times, the predominant fragments were molecular hydrogen (H 2 ), ethylene (C 2 H 4 ), propene (C 3 H 6 ), cyclopentadiene (C 5 H 6 ), cyclopentene (C 5 H 8 ), fulvene (C 6 H 6 ), and benzene (C 6 H 6 ). Accompanied by electronic structure calculations, the initial JP-10 decomposition via C–H bond cleavages resulting in the formation of the initial six C 10 H 15 radicals was found to explain the formation of all products detected in both sets of experiments. These radicals are not stable under the experimental conditions and further decompose via C–C bond β-scission processes. These pathways result in ring opening in the initial tricyclic carbon skeletons of JP-10. Intermediates accessed after the first β-scission can further isomerize or dissociate. Complex PAH products in the NRLS experiment (naphthalene, acenaphthylene, biphenyl) are likely formed via molecular growth reactions at elevated residence times.

10 SYNTHETIC FUELS↗

Combined Experimental and Computational Study on the Unimolecular Decomposition of JP-8 Jet Fuel Surrogates. I. n-Decane (n-C 10 H 22 )

Exploiting a high temperature chemical reactor, we explored in this paper the pyrolysis of helium-seeded n-decane as a surrogate of the n-alkane fraction of Jet Propellant-8 (JP-8) over a temperature range of 1100–1600 K at a pressure of 600 Torr. The nascent products were identified in situ in a supersonic molecular beam via single photon vacuum ultraviolet (VUV) photoionization coupled with a mass spectroscopic analysis of the ions in a reflectron time-of-flight mass spectrometer (ReTOF). Our studies probe, for the first time, the initial reaction products formed in the decomposition of n-decane—including radicals and thermally labile closed-shell species effectively excluding mass growth processes. The present study identified 18 products: molecular hydrogen (H 2 ), C2 to C7 1-alkenes [ethylene (C 2 H 4 ) to 1-heptene (C 7 H 14 )], C1–C3 radicals [methyl (CH 3 ), vinyl (C 2 H 3 ), ethyl (C 2 H 5 ), propargyl (C 3 H 3 ), allyl (C 3 H 5 )], small C1–C3 hydrocarbons [methane (CH 4 ), acetylene (C 2 H 2 ), allene (C 3 H 4 ), methylacetylene (C 3 H 4 )], along with higher-order reaction products [1,3-butadiene (C 4 H 6 ), 2-butene (C 4 H 8 )]. On the basis of electronic structure calculations, n-decane decomposes initially by C–C bond cleavage (excluding the terminal C–C bonds) producing a mixture of alkyl radicals from ethyl to octyl. These alkyl radicals are unstable under the experimental conditions and rapidly dissociate by C–C bond β-scission to split ethylene (C 2 H 4 ) plus a 1-alkyl radical with the number of carbon atoms reduced by two and 1,4-, 1,5-, 1,6-, or 1,7-H shifts followed by C–C β-scission producing alkenes from propene to 1-octene in combination with smaller 1-alkyl radicals. The higher alkenes become increasingly unstable with rising temperature. When the C–C β-scission continues all the way to the propyl radical (C 3 H 7 ), it dissociates producing methyl (CH 3 ) plus ethylene (C 2 H 4 ). Also, at higher temperatures, hydrogen atoms can abstract hydrogen from C 10 H 22 to yield n-decyl radicals, while methyl (CH 3 ) can also abstract hydrogen or recombine with hydrogen to form methane. Finally, these n-decyl radicals can decompose via C–C-bond β-scission to C3 to C9 alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Experimental and Computational Study on the Unimolecular Decomposition of JP-8 Jet Fuel Surrogates. II: n-Dodecane (n-C 12 H 26 )

In this paper, we investigated temperature-dependent products in the pyrolysis of helium-seeded n-dodecane, which represents a surrogate of the n-alkane fraction of Jet Propellant-8 (JP-8) aviation fuel. The experiments were performed in a high temperature chemical reactor over a temperature range of 1200 K to 1600 K at a pressure of 600 Torr, with in situ identification of the nascent products in a supersonic molecular beam using single photon vacuum ultraviolet (VUV) photoionization coupled with the analysis of the ions in a reflectron time-of-flight mass spectrometer (ReTOF). For the first time, the initial decomposition products of n-dodecane—including radicals and thermally labile closed-shell species—were probed in experiments, which effectively exclude mass growth processes. A total of 15 different products were identified, such as molecular hydrogen (H 2 ), C2 to C7 1-alkenes [ethylene (C 2 H 4 ) to 1-heptene (C 7 H 14 )], C1–C3 radicals [methyl (CH 3 ), ethyl (C 2 H 5 ), allyl (C 3 H 5 )], small C1–C3 hydrocarbons [acetylene (C 2 H 2 ), allene (C 3 H 4 ), methylacetylene (C 3 H 4 )], as well as the reaction products [1,3-butadiene (C 4 H 6 ), 2-butene (C 4 H 8 )] attributed to higher-order processes. Electronic structure calculations carried out at the G3(CCSD,MP2)//B3LYP/6-311G(d,p) level of theory combined with RRKM/master equation of rate constants for relevant reaction steps showed that n-dodecane decomposes initially by a nonterminal C–C bond cleavage and producing a mixture of alkyl radicals from ethyl to decyl with approximately equal branching ratios. The alkyl radicals appear to be unstable under the experimental conditions and to rapidly dissociate either directly by C–C bond β-scission to produce ethylene (C 2 H 4 ) plus a smaller 1-alkyl radical with the number of carbon atoms diminished by two or via 1,5-, 1,6-, or 1,7- 1,4-, 1,9-, or 1,8-H shifts followed by C–C β-scission producing alkenes from propene to 1-nonene together with smaller 1-alkyl radicals. The stability and hence the branching ratios of higher alkenes decrease as temperature increases. The C–C β-scission continues all the way to the propyl radical (C 3 H 7 ), which dissociates to methyl (CH 3 ) plus ethylene (C 2 H 4 ). Finally, in addition, at higher temperatures, another mechanism can contribute, in which hydrogen atoms abstract hydrogen from C 12 H 26 producing various n-dodecyl radicals and these radicals then decompose by C–C bond β-scission to C3 to C11 alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating Snow Water Storage in North America Using CLM4, DART, and Snow Radiance Data Assimilation

This paper addresses continental-scale snow estimates in North America using a recently developed snow radiance assimilation (RA) system. A series of RA experiments with the ensemble adjustment Kalman filter are conducted by assimilating the Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) brightness temperature T(sub B) at 18.7- and 36.5-GHz vertical polarization channels. The overall RA performance in estimating snow depth for North America is improved by simultaneously updating the Community Land Model, version 4 (CLM4), snow/soil states and radiative transfer model (RTM) parameters involved in predicting T(sub B) based on their correlations with the prior T(sub B) (i.e., rule-based RA), although degradations are also observed. The RA system exhibits a more mixed performance for snow cover fraction estimates. Compared to the open-loop run (0.171m RMSE), the overall snow depth estimates are improved by 1.6% (0.168m RMSE) in the rule-based RA whereas the default RA (without a rule) results in a degradation of 3.6% (0.177mRMSE). Significant improvement of the snow depth estimates in the rule-based RA as observed for tundra snow class (11.5%, p < 0.05) and bare soil land-cover type (13.5%, p < 0.05). However, the overall improvement is not significant (p = 0.135) because snow estimates are degraded or marginally improved for other snow classes and land covers, especially the taiga snow class and forest land cover (7.1% and 7.3% degradations, respectively). The current RA system needs to be further refined to enhance snow estimates for various snow types and forested regions.

snow depth↗

A new member of ferrous sulfates, FeSO{sub 4}·2H{sub 2}O with PtS topology showing spin-canted long-range antiferromagnetic ordering

A sanderite ferrous sulfate FeSO{sub 4}·2H{sub 2}O has been synthesized by the hydro/solvothermal method. Its crystal structure (Pccn, a=6.3160 Å, b=7.7550 Å, c=8.9880 Å, V=440.2 Å{sup 3}, Z=4) can be regarded as the condensation of alternately corner-shared FeO{sub 4}(H{sub 2}O){sub 2} octahedra and SO{sub 4} tetrahedra with a similar topology of PtS. By structural comparison with the known hydrated ferrous sulfates, the structural relation among them has been noted and discussed in detail. A variable temperature magnetic study shows a spin-canted long-range antiferromagnetic ordering in the low temperature regime, which might result from a possible phase transition during the cooling from the high temperature. - Graphical abstract: As a new number of ferrous sulfates, sanderite FeSO{sub 4}·2H{sub 2}O has been synthesized under hydro/solvothermal conditions, which exhibits a similar topology of PtS. - Highlights: • Sanderite ferrous sulfate has been synthesized. • The topology of its structure is similar to that of PtS. • A structural relation between these hydrated ferrous sulfates is discovered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The molten hydrated flux synthesis of a novel open-framework copper borophosphate and its structural relation with the precursors

A novel copper borophosphate, Cu{sub 2}(H{sub 2}O)[BP{sub 2}O{sub 7}(OH)], has been synthesized by the molten hydrated flux method. Its crystal structure (Orthorhombic, Pbca, a=8.234 Å, b=9.655 Å, c=17.805 Å, V=1415.485 Å{sup 3}, Z=8) can be regarded as the condensation of alternately edge- and corner-shared copper pyramidal chains and borophosphate chains formed via vertex-sharing PO{sub 4} and BO{sub 3}(OH) tetrahedra. Magnetic measurements indicate that antiferromagnetic interactions exist in the title compound. Due to the special reaction medium created by the molten hydrated flux method, a possible structural correlation between final solids and raw materials has been discovered even though no ordered structural fragments exist in the latter. - Graphical: Structure comparison of Cu(NO{sub 3}){sub 2}·3H{sub 2}O, Cu(NO{sub 3}){sub 2}·H{sub 2}O and Cu{sub 2}(H{sub 2}O)[BP{sub 2}O{sub 7}(OH)], showing the structural evolution of CuO{sub 5} pyramids in the synthetic process. - Highlights: • A novel copper borophosphate has been synthesized by the molten hydrated flux method. • Magnetic measurements show its antiferromagnetism at low temperature. • A structural relation between the precursor and the final solid is discovered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An advanced hybrid reprocessing system based on UF{sub 6} volatilization and chromatographic separation

To recover U, Pu, MA (Np, Am, Cm) and some specific fission products FPs (Cs, Sr, Tc, etc.) from various spent nuclear fuels (LWR/FBR: Oxide, Metal Fuels), we are studying an advanced hybrid reprocessing system based on UF6 volatilization (Pyro) and chromatographic separation (Aqueous). Spent fuels are de-cladded by means of thermal and mechanical methods and then applied to the fluorination/volatilization process, which selectively recovers the most amount of U. Then, the remained fuel components are converted to oxides and dissolved by HNO{sub 3} solution. Compared to U, since Pu, MA and FPs are significantly less abundant in spent fuels, the scale of the aqueous separation process could become reasonably small and result in less waste. For the chromatographic separation processes, we have prepared different types of porous silica-based organic/inorganic adsorbents with fast diffusion kinetics, improved chemical stability and low pressure drop in a packed column. So they are advantageously applicable to efficient separation of the actinides and FP elements from the fuel dissolved solution. In this work, adsorption and separation behavior of representative actinides and FP elements was studied. Small scale separation tests using simulated and genuine fuel dissolved solutions were carried out to verify the feasibility of the proposed process. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of charge compensation on the photoelectrochemical properties of Ho-doped SrTiO{sub 3} films

When Ho{sup 3+} ions are substituted at Sr{sup 2+} sites in SrTiO{sub 3} (STO), the excess positive charges are compensated via three complementary routes: (1) strontium vacancies, (2) titanium vacancies, and (3) conduction electrons. In this study, we show that the photoelectrochemical properties of Ho-doped STO films are dependent on the charge compensation mechanisms. The compensation mechanism via the titanium vacancies exhibits the highest photocurrent density, which is 1.7 times higher than that of the pure STO sample. Based on the measured dielectric properties and electrochemical impedance spectroscopy data, we propose that the enhanced dielectric constant of the films can enlarge the width of the space charge region at the film/liquid interface, which eventually leads to the increase of the photocurrent density. Further enhancement of photocurrent density is obtained in the samples decorated with appropriate amounts of Pt nanoparticles, showing the advantage of composites for achieving the efficient photoelectrochemical property.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗