Search NASA⌕ Search

Engineering topics

Zhao, Shangqian

Publications and source records attributed to Zhao, Shangqian.

A universal wet-chemistry synthesis of solid-state halide electrolytes for all-solid-state lithium-metal batteries

Solid-state halide electrolytes have gained revived research interests owing to their high ionic conductivity and high-voltage stability. However, synthesizing halide electrolytes from a liquid phase is extremely challenging because of the vulnerability of metal halides to hydrolysis. In this work, ammonium-assisted wet chemistry is reported to synthesize various solid-state halide electrolytes with an exceptional ionic conductivity (>1 microsiemens per centimeter). Microstrain-induced localized microstructure change is found to be beneficial to lithium ion transport in halide electrolytes. Furthermore, the interfacial incompatibility between halide electrolytes and lithium metal is alleviated by transforming the mixed electronic/ionic conductive interface into a lithium ion–conductive interface. Such all-solid-state lithium-metal batteries (ASSLMBs) demonstrate a high initial coulombic efficiency of 98.1% based on lithium cobalt oxide and a high discharge capacity of 166.9 microampere hours per gram based on single-crystal LiNi 0.6 Mn 0.2 Co 0.2 O 2 . This work provides universal approaches in both material synthesis and interface design for developing halide-based ASSLMBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deciphering Interfacial Chemical and Electrochemical Reactions of Sulfide-Based All-Solid-State Batteries

Large interfacial resistance resulting from interfacial reactions is widely acknowledged as one of the main challenges in sulfide electrolytes (SEs)-based all-solid-state lithium batteries (ASSLBs). However, the root cause of the large interfacial resistance between the SEs and typical layered oxide cathodes is not fully understood yet. Here we deciphered that interfacial oxygen loss from single-crystal LiNi 0.5 Mn 0.3 Co 0.2 O 2 (SC-NMC532) chemically oxidizes Li 10 GeP 2 S 12 , generating oxygen-containing interfacial species. Meanwhile, the interfacial oxygen loss also induces a structural change of oxide cathodes (layered-to-rocksalt). Besides, the high operation voltage can electrochemically oxidize SEs to form non-oxygen species (e.g. polysulfides). These chemically and electrochemically oxidized species, together with the interfacial structural change, are responsible for the large interfacial resistance at the cathode interface. More importantly, the widely adopted interfacial coating strategy is effective in suppressing chemically oxidized oxygen-containing species and mitigating the coincident interfacial structural change but is unable to prevent electrochemically induced non-oxygen species. These findings provide a deeper insight into the large interfacial resistance between the typical SE and layered oxide cathodes, which may be of assistance for the rational interface design of SE-based ASSLBs in future.

25 ENERGY STORAGE↗

Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLIBs) are receiving significant attention owing to their improved safety and energy density over liquid counterparts. However, single-crystal cathodes have never been investigated in ASSLIBs. In this work, single-crystal Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 (SC-NMC532) is used as the cathode material for ASSLIBs, which exhibits 6~14 times higher Li + diffusion coefficient than polycrystalline Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 (PC-NMC532). As a result, SC-NMC532 exhibits an initial specific capacity of 156.4 mAh.g -1 while PC-NMC532 shows an initial capacity of only 127.5 mAh.g -1 . After 150 cycles, SC-NMC532 retains the capacity of 94.5 mAh.g -1 . More impressively, under a high current density of 1.3 mA.cm -2 , SC-NMC532 exhibits a capacity of 82 mAh.g -1 , much higher than that of PC-NMC532 (2.1 mAh.g -1 ). This work demonstrates that single-crystal NMC cathodes could enable both high power density and high energy density of ASSLIBs.

25 ENERGY STORAGE↗

Electronic transport properties of inner and outer shells in near ohmic-contacted double-walled carbon nanotube transistors

We investigate electronic transport properties of field-effect transistors based on double-walled carbon nanotubes, of which inner shells are metallic and outer shells are semiconducting. When both shells are turned on, electron-phonon scattering is found to be the dominant phenomenon. On the other hand, when outer semiconducting shells are turned off, a zero-bias anomaly emerges in the dependence of differential conductance on the bias voltage, which is characterized according to the Tomonaga-Luttinger liquid model describing tunneling into one-dimensional materials. We attribute these behaviors to different contact conditions for outer and inner shells of the double-walled carbon nanotubes. A simple model combining Luttinger liquid model for inner metallic shells and electron-phonon scattering in outer semiconducting shells is given here to explain our transport data at different temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Piezo-antiferromagnetic effect of sawtooth-like graphene nanoribbons

A type of sawtooth-like graphene nanoribbon (SGNR) with piezo-antiferromagnetic effect is studied numerically. The ground state of the studied SGNR changes from nonmagnetic state to antiferromagnetic state with uniaxial strain. The changes of the spin-charge distributions during the stretching are investigated. The Hubbard model reveals that the hopping integrals between the π-orbitals of the carbon atoms are responsible to the piezo-antiferromagnetic effect. The study sheds light on the application of graphene-based structures to nanosensors and spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitonic effects of E11, E22, and E33 in armchair-edged graphene nanoribbons

We explore excitonic effects of E11, E22, and E33, which are excitons formed between the three highest valence subbands and the three lowest conduction ones, in armchair-edged graphene nanoribbons by applying the extended tight-binding model including electron-electron interactions. Our results show that the excitation energies and the binding energies decrease inversely with the ribbon widths and can be classified into three categories based on their width indices. We found the relation between the band structures and the binding energies and explained some recent observations of strong excitonic effects in graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗