Argon-Selective CMS for High Purity Oxygen Production
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Zheng, Jian.
Explore the source record for details and available documents.
Steady state rate expressions can be derived to distinguish the Cossee–Arlman and metallacycle mechanisms postulated for propylene oligomerization on nickel-based catalysts based on product selectivities, where product selectivities for the former are a function of olefin pressure because sequential coordination and insertion steps lead to independent mechanistic pathways for different hexene isomers. In contrast, the metallacycle mechanism presents pressure-independent product selectivities due to successive coordination prior to the kinetically relevant steps in each mechanism. In this work, steady state propylene oligomerization rates and selectivities were measured in the absence of an activator on nickel functionalized UiO-66 metal organic framework (MOF), Ni/UiO-66, to validate the Cossee–Arlman mechanism for light olefin oligomerization. In situ NO titrations reveal that ~5% of nickel sites were active during the reaction, and thus, not all nickel sites are relevant for catalysis. Propylene dimerization was first order in propylene pressure from 5 to 500 kPa with an apparent activation energy of ~20 kJ mol -1 from 453 to 493 K. Calculated apparent activation energies with density functional theory (DFT) calculations on cluster models of Ni/UiO-66 are in agreement with experiment to corroborate the Cossee–Arlman mechanism. Selectivities of hexene products and the ratio of hexene product selectivities on Ni/UiO-66 are in accordance with selectivity expressions derived from the Cossee–Arlman mechanism. In conclusion, analysis of product selectivities can be used more extensively to demarcate the Cossee–Arlman and metallacycle mechanisms for olefin oligomerization on metal-based catalysts.
Abstract TiO 2 polymorphs have distinct properties that are widely employed in various applications. However, mechanisms of transformations between these polymorphs are not fully understood, especially at atomic scale, inhibiting advancing the design and application of the transitional phases. Here, based on results from semi‐in situ transmission electron microscopy, density functional theory, and X‐ray photoemission experiments, a physical picture of transitional structures is discovered, in which continuous variations in atomic positions form along a previously unreported anatase‐to‐rutile phase transformation path of [010] A –to–[] R and (004) A –to– (011) R . These gradient structures give rise to continuous band bending, which promotes electron‐hole separation and inhibits their recombination across the bulk of the particles, leading to a large functionally active volume fraction and resulting in high photoactivity. These findings suggest that interphase matter based on extended gradient structures can be designed to advance new functions not achievable using abrupt interfaces.
The high activation barrier of the C-H bond in methane, combined with the high propensity of methanol and other liquid oxygenates toward overoxidation to CO 2 , have historically posed significant scientific and industrial challenges to the selective and direct conversion of methane to energy-dense fuels and chemical feedstocks. Here, we report a unique core-shell nanostructured photocatalyst, silica encapsulated TiO 2 decorated with AuPd nanoparticles (TiO 2 @SiO 2 -AuPd), that prevents methanol overoxidation on its surface and possesses high selectivity and yield of oxygenates even at high UV intensity. This room-temperature approach achieves high selectivity for oxygenates (94.5%) with a total oxygenate yield of 15.4 mmol/g cat ·h at 9.65 bar total pressure of CH 4 and O 2 . The working principles of this core-shell photocatalyst were also systematically investigated. Finally, this design concept was further demonstrated to be generalizable for the selective oxidation of other alkanes.
Grafting metal cations to missing linker defect sites in zirconium-based metal–organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen–deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1–3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Furthermore, density functional theory calculations probing the Cossee–Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.
Explore the source record for details and available documents.
By the end of the century, tens of gigatonnes of CO 2 will need to be removed from the atmosphere every year to maintain global temperatures. Natural weathering of ultramafic rocks and subsequent mineralization reactions can convert CO 2 into ultra-stable carbonates. Although this will draw down all excess CO 2 , it will take thousands of years. CO 2 mineralization could be accelerated by weathering ultramafic rocks with biodegradable lixiviants. We show that if these lixiviants come from cellulosic biomass, this demand could monopolize the world’s biomass supply. We demonstrate that electromicrobial production technologies (EMP) that combine renewable electricity and microbial metabolism could produce lixiviants for as little as $\$200$ to $\$400$ per tonne at solar electricity prices achievable within the decade. We demonstrate that EMP could make enough lixiviants to sequester a tonne of CO 2 for less than $\$100$. This work highlights the potential of this approach and the need for extensive R&D.
Homotopic sites in a well-controlled environment are not only ideal systems for mechanistic studies, but also allow optimal control of catalytic transformations. Sites having only a single metal cation and sites consisting of metal oxo complexes with few nickel (Ni) cations supported on the nodes of UiO-66 metal-organic framework (Ni-UiO-66) are studied for 1-butene dimerization. Monomeric Ni sites, which bind to the Zr 6 node via two Zr-OH(µ3) linkages, are active and selective for the dimerization of 1-butene to linear and mono-branched C 8 isomers. Ni oxo complexes with few Ni cations show lower activity and promote the oligomerization of transiently formed C 8 isomers. In conclusion, Kohn-Sham density function theory calculations combined with spectroscopic measurements and kinetic analyses indicate that dimerization follows a Cossee-Arlman reaction mechanism.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive the refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudo-compression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus increases in this working capacity directly translate to a more compact and efficient cooling system. How-ever, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance, and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorb-ate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. Here this atomic level understanding of sorb-ate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we envision the capability to engineer designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Although traditional commercially available porous carbon-fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in synthetic carbons may further improve performance. Moreover, insights into structure-property relationships that target higher sorption capacities within these synthesized carbons may guide such materials' future design. We utilized hierarchically porous synthetic carbons (HPCs) with colossal microporous and mesoporous characterized by high surface areas (up to 2689 m 2 /g) and pore volumes (up to 10.31 cm 3 /g) towards fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ~250 wt.%, outperforming the highest uptake carbon material to date, Maxsorb III (~220 wt.%). Additionally, material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt%, ~1.5 times the value of reported carbon materials/R134a). Fluorocarbons adsorption on HPCs also displays fast kinetics (equilibrium time: ~2 min) mainly driven by physical adsorption (Qst: ~27 kJ/mol), characteristic of swiftly reversible behavior adsorption-desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.
Adsorption-based cooling is an energy-efficient renewable-energy technology that can be driven using low-grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear-shaped isotherms are revealed for the materials, namely COP-2 and COP-3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect-containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect-containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect-containing porous COPs are promising for adsorption-based cooling applications.
Combating the COVID-19 pandemic requires potent and low-cost therapeutics. We identified a series of single-domain antibodies (i.e., nanobody), Nanosota-1, from a camelid nanobody phage display library. Structural data showed that Nanosota-1 bound to the oft-hidden receptor-binding domain (RBD) of SARS-CoV-2 spike protein, blocking viral receptor angiotensin-converting enzyme 2 (ACE2). The lead drug candidate possessing an Fc tag (Nanosota-1C-Fc) bound to SARS-CoV-2 RBD ~3000 times more tightly than ACE2 did and inhibited SARS-CoV-2 pseudovirus ~160 times more efficiently than ACE2 did. Administered at a single dose, Nanosota-1C-Fc demonstrated preventive and therapeutic efficacy against live SARS-CoV-2 infection in both hamster and mouse models. Unlike conventional antibodies, Nanosota-1C-Fc was produced at high yields in bacteria and had exceptional thermostability. Pharmacokinetic analysis of Nanosota-1C-Fc documented an excellent in vivo stability and a high tissue bioavailability. As effective and inexpensive drug candidates, Nanosota-1 may contribute to the battle against COVID-19.
Not Available
Abstract Adsorption‐based cooling is an energy‐efficient renewable‐energy technology that can be driven using low‐grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear‐shaped isotherms are revealed for the materials, namely COP‐2 and COP‐3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect‐containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect‐containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect‐containing porous COPs are promising for adsorption‐based cooling applications.