Engineering topics

Zheng, Jim P.

Publications and source records attributed to Zheng, Jim P..

3 records

DOE OSTI2024

Trace LiBF 4 Enabling Robust LiF-Rich Interphase for Durable Low-Temperature Lithium-Ion Pouch Cells

Lithium-ion batteries (LIBs) with electrolytes containing lithium tetrafluoroborate (LiBF 4 ) can achieve large capacity retention under low temperature, but the accompanying rapid capacity decay inhibits commercialization. Here, in this study, the impact of LiBF 4 as a supplemental salt to LiPF 6 is systematically investigated using low ethylene carbonate (EC)-content electrolytes, along with a low-melting-point cosolvent. It is found that rational adjustment of the amount of LiBF 4 could not only regulate the interactions of anions and solvents in Li + solvation sheaths but also tune the composition and morphology of solid electrolyte interphase (SEI). It is worth noting that electrolytes with trace amount of LiBF 4 (0.05 M) show synergetic interaction between PF 6 - and Li + and decreased interaction between EC and Li + , achieving a dense and LiF-rich SEI, which enables a 200 mAh pouch cell with less gas generation, long-lived cycling, and higher low-temperature capacity, simultaneously. This work provides new insight into utilizing trace LiBF 4 for stable interface construction of durable low-temperature LIBs.

25 ENERGY STORAGE↗

DOE OSTI2023

Decoupling Accurate Electrochemical Behaviors for High-Capacity Electrodes via Reviving Three-Electrode Vehicles

Developing high-capacity electrodes requires the evaluation of electrochemical behaviors with an increasing current density. Currently, the current density for evaluation of high-capacity electrodes has reached a new stage where the polarization at the lithium counter electrode has become a technical barrier for the accurate evaluation of battery electrodes, resulting in severe performance and mechanism mischaracterizations. Here, the accurate electrochemical behavior for high-capacity electrodes via a single-channel three-electrode vehicle is decoupled, by which the impact of lithium counter electrode is minimized. The testing high-capacity graphite electrode is capable of delivering an excellent rate capability with 81.7% capacity retention at 0.3 C, as well as stable cycling performance retaining 97.5% practical reversible capacity after 225 cycles, much higher than the graphite electrode tested with traditional half-cell testing vehicle but in close agreement with the results obtained from a well-matched full cell, reflecting accurate electrochemical performance evaluations of high-capacity electrodes. Moreover, detailed electrochemical mechanisms of impedance and diffusion properties for working electrodes are also successfully decoupled individually. Here, this work uncovers the mismatch between traditional evaluation configuration and increasing testing current density and provides a guideline for accurate electrochemical evaluation for ever-increasing high-capacity electrodes, which is of great significance for high-energy lithium or other alkali-metal ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2022

Over-Potential Tailored Thin and Dense Lithium Carbonate Growth in Solid Electrolyte Interphase for Advanced Lithium Ion Batteries

A stable solid electrolyte interphase (SEI) is highly desired to prevent parasitic reactions during normal operation of lithium-ion batteries (LIBs). Lithium carbonate (Li 2 CO 3 ) is one of the most significant components for smooth SEI passivation layers; while the formation mechanism and special distribution of the Li 2 CO 3 layer has not yet been illustrated. In this study, an over-potential tailored Li 2 CO 3 growth mechanism based on the typical hard carbon anode is demonstrated. With an increase in the over-potential, the size of Li 2 CO 3 decreases gradually as the amount increases. When the over-potential is large (potential at 0.01 V), a Li 2 CO 3 -rich thin and dense inorganic layer with the average thickness of 4.4 nm in the SEI is constructed. The special SEI the completely wraps the boundaries of the anode enables a larger Li-ion de-solvation energy barrier and a lower Li-ion diffusion energy barrier, which supports low self-discharge behavior and a fast kinetic rate at the anode. More generally, this Li 2 CO 3 growth mechanism is also applicable to commercialized graphite anodes and similar results are also obtained. Therefore, this work provides a new insight into the Li 2 CO 3 growth mechanism in SEIs, as well as a guideline for the design of stable artificial SEIs.

25 ENERGY STORAGE↗