Engineering topics

Zhong, Lirong

Publications and source records attributed to Zhong, Lirong.

At least 19 records

DOE OSTI2026

Advanced LiFSI-LiPF6 Electrolyte for Wide-Temperature and Thermally Stable Lithium-Ion Batteries

A new optimized LiFSI–LiPF6 dual-salt controlled-solvation electrolyte (E-DS) is demonstrated to enable practical graphite||LiNi0.8Mn0.1Co0.1O2 cells (˜4.0 mAh cm?²) to achieve exceptional performance and safety under extreme conditions. By optimizing anion coordination with the smaller, more dissociating FSI? anion, the E-DS forms ultrathin, dense, and inorganic-rich electrode/electrolyte interphases that dramatically suppress solvent decomposition, transition-metal dissolution, and surface reconstruction compared to the conventional LiPF6/carbonate electrolyte. Consequently, E-DS cells deliver >78% capacity retention after 300 cycles at 60 °C, retain fast discharging capacity at 30 °C, and operate effectively at -20 °C. Most strikingly, fully charged full cells with E-DS, even under overcharging to 4.8 V, show a lower heat evolution in stable formulations — transforming a traditionally unstable high-voltage/high-temperature configuration into an intrinsically safe state. This work establishes a new benchmark for carbonate-containing electrolytes, simultaneously achieving high energy density, fast-discharging capability, wide-temperature operation (-20 to 60 °C), and outstanding thermal safety in nickel-rich lithium-ion batteries.

electrode/electrolyte interphase↗

DOE OSTI2024

Hydrogen, Methane, Brine Flow Behavior, and Saturation in Sandstone Cores During H 2 and CH 4 Injection and Displacement

Large-scale underground hydrogen storage (UHS) is a critical component in the emerging hydrogen economy. Knowledge of multiphase flow behavior involving hydrogen in storage reservoir formations is crucial to characterizing hydrogen transport properties and essential for the deliverability and storage operations of UHS. There are still many gaps in fully understanding hydrogen–methane–brine multiphase phase flow that require further investigation. In this work, H 2 and CH 4 were injected through brine-saturated sandstone cores using a tri-axial core holder system fitted with flow rate meters and pressure transducers, while the effluent gas concentrations were analyzed using an online micro gas chromatograph. Brine displacement, permeability, and gas breakthrough curves were measured. We studied the flow behavior of hydrogen and methane in sandstone cores through testing brine displacement by gas injection and comparing the hydrogen displacement of methane with the methane displacement of hydrogen. We also tested the differences between horizontal and vertical flow in brine displacement. The results showed that brine displacement was more efficient in a core with higher permeability and porosity, resulting in a higher initial gas saturation. A higher gas injection rate brought about faster gas breakthrough measured by pore volume and sharper concentration curves. Hydrogen did not exhibit abnormal flow in the sandstone when the flow was horizontal and downward vertical. Gas overriding was observed in brine displacements when the flow was horizontal, with hydrogen showing this behavior more profoundly compared to methane. Downward vertical gas injection induced higher efficiency brine displacement compared to horizontal displacement and resulted in a higher initial gas saturation in the sandstone cores. These findings address critical knowledge gaps regarding gas flow patterns and displacement behaviors during hydrogen injection and recovery phases in UHS facilities using methane as the cushion gas. The insights from this research offer valuable guidance for optimizing UHS systems, ensuring operational efficiency, and advancing sustainable energy solutions in alignment with decarbonization goals.

08 HYDROGEN↗

DOE OSTI2024

High Throughput Electrochemical Screening of Phosphate-Rich Nonflammable Electrolytes in Lithium-Ion Batteries

Frequent fires and explosions in lithium-ion batteries (LIBs) used in grid energy storage systems (ESS) highlight the necessity of revisiting nonflammable phosphate electrolytes as alternatives to the currently used flammable carbonates. However, previous studies have shown the difficulty of integrating phosphate solvents into LIB electrolytes due to compatibility issues with graphite. In this work, we developed a high-throughput (HTP) electrochemical characterization method, akin to pH test paper, to rapidly screen potential phosphate electrolytes and graphite materials. Through HTP screening, we identified 101 promising combinations out of 1,740. This number was reduced to 26 after testing in Li/Graphite half cells. The optimized phosphate-rich electrolyte (60 v% phosphate) with cosolvents demonstrated 300 stable cycles at 0.1 C in Graphite/LiFePO 4 (LFP) full cells with thick electrodes (∼3.0 mAh cm −2 ), surpassing prior research findings. This unique HTP method provides a powerful tool to expedite the development of safe LIBs for ESS applications.

25 ENERGY STORAGE↗

DOE OSTI2024

Applying colloidal silica suspensions injection and sequential gelation to block vertical water flow in well annulus: laboratory testing on rheology, gelation, and injection

We evaluated the application of silica suspension injection and sequential gelation to block vertical water flow in the annuli of long-screened wells. First, we studied the viscosity, rheological behavior, and gelation performance of colloidal silica suspensions in batch tests. Then, we tested the injection of silica suspensions and the water flow blocking efficiency of the later formed silica gel in column and bench-scale sandbox experiments. Micron-sized fumed powder silica suspensions and nanosized silica suspensions recovered from geothermal fluids were tested in this work. Fumed silica suspensions showed shear thinning, while nanosized silica suspensions exhibited Newtonian flow behavior. During the gelation process, the nanosized silica suspension changed from a Newtonian fluid to a shear thinning fluid while increasing its overall viscosity. At comparable concentrations, the nanosized silica suspensions have much lower viscosity than that of the fumed silica suspensions. Increases in the Na + concentration and silica particle concentration in these suspensions shortened the gelation time. Silica suspension gelation in sand columns completely blocked the water flow and sustained the injection pressure up to 50 psig (344.7 kPa). A silica suspension was successfully injected into the target zone in the annulus of a bench-scale sandbox mimicking long-screened wells in the field. The silica gel formed in the annulus effectively blocked chemical transport through the gelled zone. Our research reveals that a process using silica suspension injection and sequential gelation technology is promising for blocking the vertical water flow and chemical transport through the filter pack in targeted zones within the annulus of long-screened well systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Understanding and Enhancing Silicon Nanoparticle Distribution during Electrode Processing

Silicon-dominant anodes are of great interest because of their potential to boost the cell-level energy of state-of-the-art Li-ion batteries. While silicon materials have been extensively studied, understanding interactions at the electrode level has recieved little attention, especially the coating process of Si particles, which plays an equally important role in unlocking the full potential of silicon anodes. Herein, the electrode processing of a Si-dominated anode (52.8 wt%, 3.5–4.5 mAh cm −2 ) is being investigated to understand the relationship of processing on the morphology and properties of Si anodes at the electrode level. It has been found that almost-undetectable Si agglomerates easily form during electrode processing, which grow into largeprotrusions after lithiation and trigger potential internal shorting and self-discharge problems. A facile slurry filtration step is proposed to homogenize the particle distribution within Si-dominant electrodes which improves the electrochemical performance and storage stability of Si-based Li ion batteries.

Wu, Bingbin↗

DOE OSTI2024

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes in a Localized High‐Concentration Electrolyte

Abstract Lithium (Li)‐rich transition metal oxide cathodes with a cation disordered rock salt structure (DRX) are increasingly gaining popularity for advanced Li batteries as they offer high capacity and cost benefits over the commonly used layered Li transition metal oxide cathodes. However, the performance of DRX cathodes and their applications are limited by severe side reactions between the cathode and the state‐of‐the‐art carbonate‐based electrolytes at high voltage of 4.8 V, transition metal dissolution, and structural instability of the cathode particles. In this work, an advanced localized high‐concentration electrolyte (LHCE) is developed to form a stable cathode‐electrolyte interphase and mitigate structural instability of the Li 1.13 Mn 0.66 Ti 0.21 O 2 (LMTO) DRX during electrochemical cycling. Li||LMTO half cells with the LHCE demonstrate increased capacity, cycling stability, and superior rate capability compared with cells containing a conventional carbonate electrolyte. For instance, the Li||LMTO cells cycled in LHCE show a higher initial capacity of 205.2 mAh g −1 and a better capacity retention of 72.5% after 200 cycles at a current density of 20 mA g −1 than those with the conventional electrolyte (initial capacity of 187.7 mAh g −1 and capacity retention of 19.9%). This work paves the way to the development of practical DRX cathode‐based high‐energy Li batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Molecular detection of per- and polyfluoroalkyl substances in water using time-of-flight secondary ion mass spectrometry

Detection of per- and polyfluoroalkyl substances (PFASs) is crucial in environmental mitigation and remediation of these persistent pollutants. We demonstrate that time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a viable technique to analyze and identify these substances at parts per trillion (ppt) level in real field samples without complicated sample preparation due to its superior surface sensitivity. Several representative PFAS compounds, such as perfluorooctanesulfonic acid (PFOS), perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluoheptanoic acid (PFHpA), and perfluorononanoic acid (PFNA), and real-world groundwater samples collected from monitoring wells installed around at a municipal wastewater treatment plant located in Southern California were analyzed in this work. ToF-SIMS spectral comparison depicts sensitive identification of pseudo-molecular ions, characteristic of reference PFASs. Additionally, principal component analysis (PCA) shows clear discrimination among real samples and reference compounds. Our results show that characteristic molecular ion and fragments peaks can be used to identify PFASs. Furthermore, SIMS two-dimensional (2D) images directly exhibit the distribution of perfluorocarboxylic acid (PFCA) and PFOS in simulated mixtures and real wastewater samples. Such findings indicate that ToF-SIMS is useable to determine PFAS compounds in complex environmental water samples. In conclusion, ToF-SIMS provides simple sample preparation and high sensitivity in mass spectral imaging, offering an alternative solution for environmental forensic analysis of PFASs in wastewater in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Electric-Field-Induced Assembly of an Ionic Liquid–Water Interphase Enables Efficient Heavy Metal Electrosorption

Controlling ion desolvation, transport, and charge transfer at the electrode-electrolyte interface (EEI) is critical to enabling the rational design of efficient and selective separation of targeted heavy metals and decontamination of industrial waste water. One challenge is to sufficiently resolve and interrogate the intermediate transformation steps between solvated metal cations and bare cations for electroreduction at the EEI and establish pathways to modulate these steps to achieve efficient energy transfer for targeted reactive separations. Herein, we obtained a predictive understanding of the effect of adding a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium chloride (EMIMCl), to an aqueous electrolyte on modulating the desolvation and electrosorption of Pb 2+ cations using a combination of experimental and theoretical techniques. Here, we reveal formation of a compact interphase layer consisting of EMIMCl-Pb complex clusters under an applied electric field using operando electrochemical Raman spectroscopy, atomic force microscopy, and electrochemical impedance spectroscopy measurements combined with classical molecular dynamics simulations. The application of a larger negative potential is shown to result in formation of a well oriented layer with the positive imidazolium ring of the EMIMCl lying on the electrode and the long hydrophobic alkyl chain extending into the bulk electrolyte. This oriented layer is demonstrated to facilitate desolvation of incoming solvated Pb 2+ cations and decrease the charge transfer resistance for Pb electrodeposition, which has important implications for selective removal of Pb from contaminated mixtures. Overall, our studies open up new opportunities to modulate ion desolvation using hydrophobic ionic liquids in aqueous electrolytes for efficient heavy metal separation.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Online and noninvasive monitoring of battery health at negative-half cell in all-vanadium redox flow batteries using ultrasound

Hydrogen evolution is one of the major side reactions that is detrimental to the health of all-vanadium redox flow batteries, especially for long-term cycling. Effective, low-cost, and accurate online prediction and detection methods for hydrogen generation are not yet available. In this work, we designed an online, noninvasive ultrasonic probing approach for monitoring the state of charge (SoC), predicting the hydrogen generation, and detecting hydrogen gas bubbles in anolyte solutions. The technique employs a pulse-echo method to measure the sound speed and the acoustic attenuation coefficient of the anolyte solution. Through static offline experiments and online in operando experiments, we have demonstrated that when hydrogen gas is generated in anolyte solutions, large variations are observed in both sound speed and acoustic attenuation coefficient measurements. We found that the variations of acoustic attenuation coefficient are highly correlated (correlation coefficients >0.9) with the gas flow rate. In conclusion, the designed acoustic method can monitor the SoC of anolyte, predict the hydrogen generation, and detect the presence of gas bubbles in an anolyte solution and, thus, provide information about the state of health for operation and management of flow battery systems.

25 ENERGY STORAGE↗

DOE OSTI2023

Proton-regulated alcohol oxidation for high-capacity ketone-based flow battery anolyte

Redox flow batteries have a unique architecture that potentially enables cost-effective long-duration energy storage to address the intermittency introduced by increased renewable integration for the decarbonization of the electric power sector. Targeted molecular engineering has demonstrated electrochemical reversibility in natively redox-inactive ketone molecules in aqueous electrolytes. Yet, the kinetics of fluorenone-based flow batteries continue to be limited by slow alcohol oxidation. We show how strategically designed proton regulators can accelerate alcohol oxidation and thus enhance battery kinetics. Fluorenone-based flow batteries with the organic additive ß-cyclodextrin demonstrate enhanced rate capability, high capacity, and long cycling. This study opens a new avenue to improve the kinetics of aqueous organic flow batteries by modulating the reaction pathway with a homogeneous catalyst.

25 ENERGY STORAGE↗

DOE OSTI2023

Effects of 2D filler on rheology of additive manufacturing polymers: Simulation and experiment on polyetherketoneketone-mica composites

Polymeric composites have attracted increasing interest in fundamental studies and industrial applications due to their often-superior characteristics over conventional pure polymers. In this work, we studied the relationship between the rheological properties, critical in processing methods such as additive manufacturing, and the structure of a polymer-2D filler system by experiment and simulation methods. Considering the high performance polymer polyetherketoneketone (PEKK) with 2D filler (mica) composite as an example, the effects of filler size, filler content, surface chemistry and shear rate were systematically investigated. Here, it is demonstrated that the interaction between the polymer and 2D filler brings two different consequences on tuning the viscosity of polymer-filler composite. The stronger interaction increases the shear stress of the polymer-2D filler composite system, leading to higher viscosity. On the other hand, the stronger interaction can promote more absorption of polymer chains on the surface, which makes the local polymer network disentangled and decreases the continuous viscosity from the polymer network. This work provides a fundamental understanding on the relationship between macroscopic rheological properties and the structural properties and energetics at molecular level of polymer-2D filler composite.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Is Nonflammability of Electrolyte Overrated in the Overall Safety Performance of Lithium Ion Batteries? A Sobering Revelation from a Completely Nonflammable Electrolyte

It has been widely assumed that the flammability of the liquid electrolyte is one of the most influential factors that determine the safety of lithium-ion batteries (LIBs). Following this consideration, a completely nonflammable electrolyte is designed and adopted for graphite||LiFePO 4 (Gr||LFP) batteries. Contrary to the conventional understanding, the completely nonflammable electrolyte with phosphorus-containing solvents exhibits inferior safety performance in commercial Gr||LFP batteries, in comparison to the flammable conventional LiPF 6 -organocarbonate electrolyte. Mechanistic studies identify the exothermic reactions between the electrolyte (especially the salt LiFSI) and the charged electrodes as the “culprit” behind this counterintuitive phenomenon. The discovery emphasizes the importance of reducing the electrolyte reactivity when designing safe electrolytes, as well as the necessity of evaluating safety performance of electrolytes on a battery level.

25 ENERGY STORAGE↗

DOE OSTI2022

Natural colloids facilitated transport of steroidal estrogens in saturated porous media: Mechanism and processes

Steroid estrogens (SEs) are widely distributed in terrestrial environment, whilst the transport of SEs in groundwater is not well understood. Specifically, the effects of ubiquitous natural colloids on the SEs transport are unclear. Here, the influence of inorganic colloids (i.e. silica and illite) and organic colloids, i.e. Humic acid (HA), on the transport of estrone (E1) and estradiol (E2) in saturated porous media were studied in laboratory scale column experiments. Characterization on the colloids and the column packing material was conducted to provide bases for the interpretation of column test findings. Results showed that the transport of SEs was facilitated by the nature colloids that were migrating through the saturated porous media. About 38.5% of E1 and 24.6% of E2 were retained in the column when colloids were absent in the system. Further, when transporting with silica colloids, illite colloids, and HA colloids, the transport of E1 was enhanced by 15.64%, 11.17%, and 25.60%, respectively; whilst the transport of E2 was improved by 19.56%, 23.06%, and 36.40%, respectively. The colloids’ SEs transport enhancement depended not only on the mobility of the colloids but also on their geochemical characteristics. The tested organic colloids showed 1.5-2.5 times greater ability on promoting the transport of SEs than the inorganic ones. The proposed mechanisms of nature colloids facilitated transport of SEs include competing for adsorption sites on the sand surfaces by the colloids resulting mobilization of adsorbed SEs from solid matrix, and transport of colloids as carriers for SEs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

High-Safety Electrolytes for Lithium-Ion Batteries : Is non-flammability of electrolyte overrated in the overall safety performance of lithium ion batteries?

It has been widely considered that the flammability of the liquid electrolyte is one of the most influential factors that determine the safety of lithium ion batteries (LIBs). Following this consideration, a completely non-flammable electrolyte was designed and adopted to graphite||LiFePO 4 (Gr||LFP) batteries. Contrary to the conventional understanding, the completely non-flammable electrolyte with phosphorus-containing solvents exhibits inferior safety performance in commercial Gr||LFP batteries, in comparison to the flammable conventional LiPF 6 -organocarbonate electrolyte. Mechanistic studies identify the exothermic reactions between the electrolyte (especially the flame retarding phosphate solvent) and the charged electrodes as the “culprit” behind such a counterintuitive phenomenon. The discovery emphasizes the importance of reducing the electrolyte reactivity when designing safe electrolytes, as well as the necessity of evaluating safety performances of electrolyte on a battery level.

25 ENERGY STORAGE↗

DOE OSTI2022

Facile Dual-Protection Layer and Advanced Electrolyte Enhancing Performances of Cobalt-free/Nickel-rich Cathodes in Lithium-Ion Batteries

Despite cobalt (Co)-free/nickel (Ni)-rich layered oxides being considered as one of the promising cathode materials due to their high specific capacity, their highly reactive surface is one of the shortcomings that still hinder their practical usages in high-energy-density batteries. Herein, a polyimide/polyvinylpyrrolidone (PI/PVP, denoted as PP) coating layer is demonstrated as dual-protection for LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode material to suppress surface contamination against moisty air and to prevent unwanted side reactions between cathode and electrolyte during electrochemical cycling. The optimal PP-coated NMT (PP@NMT) preserves a clean surface without generation of lithium (Li) residues, structural degradation, and gas evolution after exposure to air with ~30% humidity for 2 weeks. Contrarily, the exposed bare NMT shows severe contamination, structural shrinkage due to Li loss, and increased gas release during charging. In addition, the exposed PP@NMT significantly enhances the electrochemical performance of graphite (Gr)||NMT cells by decreasing byproducts and maintaining structural stability. Moreover, the exposed PP@NMT achieves a high capacity retention of 86.7% after 500 cycles in Gr||NMT cells using an advanced localized high-concentration electrolyte. Furthermore, this work demonstrates a promising facile approach to the protection of Co-free/Ni-rich layered cathodes for their practical applications even after exposure to moisty air.

25 ENERGY STORAGE↗

DOE OSTI2022

Sulfone-based electrolytes for high energy density lithium-ion batteries

Here, in this work, localized high concentration electrolytes (LHCEs) based on tetramethylene sulfone (TMS) were designed. Similar to LHCEs based on other solvents, TMS-based LHCEs can achieve excellent compatibility with high energy density lithium ion batteries (LIBs) when combined with a proper additive. By comparing LHCEs based on different solvents and additives, it was revealed that the unique solvation structure of LHCEs facilitates the synergetic decomposition of anion, solvent and additive in the solid electrolyte interphase (SEI) formation. Proper combinations of the three constituents of the solvation sheaths in LHCEs can promote the formation of highly effective SEI on graphite negative electrode. The absence of LiPF 6 in LHCEs also suppresses the degradation of positive electrode materials in LIBs. The superior interphasial properties of LHCEs is the key to realizing the long lifespan of high energy density LIBs.

25 ENERGY STORAGE↗

DOE OSTI2022

Enhanced delivery of engineered Fe-Mn binary oxides in heterogeneous porous media for efficient arsenic stabilization

Heterogeneity in sediment and aquifer is universal, resulting in preferential flows of injected materials in the high permeability regions and forming flow by-passed zones in the low permeability regions during in-situ subsurface remediation. This adverse effect can considerably delay the completion of remedial operations and significantly increase the cost. Column experiments were designed and conducted to study the transport of starch- and starch-xanthan gum modified Fe-Mn binary oxide particles (SFM and SXFM) in saturated heterogeneous porous media and to reveal the particles’ arsenic (As) stabilization performance. Fine-in-Coarse (FIC) and Coarse-in-Fine (CIF) patterns of heterogeneous packings were set up in the columns. Testing results demonstrated that starch-xanthan gum dual treatment on Fe-Mn binary oxides successfully improved the particles’ migration capability in heterogeneous porous media and their distribution uniformity attributed to the profound shear thinning behavior of xanthan gum solution. The addition of xanthan gum to the system increased the viscosity and shear thinning property of SXFM suspension, making it a better candidate for delivery. Both SFM and SXFM stabilized As in heterogeneously packed sediment collected from a contaminated site, with SXFM showing better stabilization performance than SFM. The stabilization effects of SXFM were 90.7-97.0%, compared to 82.0-95.2% of SFM.

Yan, Xiulan↗

DOE OSTI2021

Characterizing the Influence of Organic Polymers on the Specific Reactivity of Particulate Remedial Amendments

Commercially available particulate amendments demonstrate high reactivity for effective treatment of water soluble organic and inorganic contaminants in laboratory studies; however, transport of these particles is constrained in the subsurface. In many field applications, particulate amendments are mixed with organic polymers to enhance mobility for direct push applications or stabilize suspensions for high mass loadings. As such, the interactions between particulate amendments, organic polymers and contaminant species need to be systematically investigated to properly understand mechanistic processes that facilitate predictive performance metrics for specific applications in situ . In this study, batch experiments were conducted to quantify the effects of organic polymers (xanthan gum, guar gum, and sodium alginate), polymer concentration (800 and 4,000 mg/L), and aging (up to 28 days) on chromate treatment rate and capacity by two classes of amendments: reductants [granular zero-valent iron (gZVI), micron-ZVI (mZVI), sulfur modified iron (SMI)], and an adsorbent (bismuth sub-nitrate). When particulate amendments were suspended in polymer solutions, reductants retained between 84–100% of the amendment treatment capacity. Conversely, the adsorbent maintained 63–97% relative treatment capacity of the no-polymer control. Polymer solutions had a more pronounced impact on the rate of chromate removal; first order rates of chemical reduction decreased by as much as 70% and adsorption by up to 81% relative to the no-polymer controls. Polymer–amendment aging experiments also showed decreased Cr(VI) treatment capacity; reductants decreased by as much as 24% and adsorption decreased by as much as 44% after 28 days of incubation. While polymer suspensions are needed to aid the injection of particulate amendments into the subsurface, the results from this study indicate potential losses of treatment capacity and a decrease in the rate of remedial performance due to the physical and chemical interactions between polymer suspensions and reactive particulate amendments. Simple batch systems provide baseline characterization of tripartite interactions for the removal of Cr(VI). Additional work is needed to quantify the full impact of polymers on remedial outcomes under site relevant conditions at field scale.

54 ENVIRONMENTAL SCIENCES↗