Search NASA⌕ Search

Engineering topics

Zhou, Hong‐Cai

Publications and source records attributed to Zhou, Hong‐Cai.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Zirconium‐Based Metal–Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here, in this work, the rational design and synthesis of two novel zirconium‐based metal‒organic frameworks (MOFs) bearing free ortho ‐hydroxy sites, namely noninterpenetrated PCN‐1001 and twofold interpenetrated PCN‐1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN‐1001 to PCN‐1002 is realized. Compared to PCN‐1001, PCN‐1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g −1 (1.53 mmol g −1 ), which is comparable to the reported record values. Moreover, PCN‐1002 shows rapid kinetics, high selectivity, and long‐life cycles in PFOA removal tests. Solid‐state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho ‐hydroxy sites and PFOA, along with Lewis acid‐base interaction, work collaboratively to enhance PFOA adsorption.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assembling Phenothiazine into a Porous Coordination Cage to Improve Its Photocatalytic Efficiency for Organic Transformations

Abstract Photo‐catalysis by small‐molecules is often limited by catalyst degradation and low electron‐transfer efficiency. Herein we report a stable N‐phenyl‐phenothiazine (PTH)‐derived porous coordination cage (PCC) as a highly efficient photocatalyst. By the incorporation of the photocatalytic PTH moiety into a PCC, aggregation‐induced quenching (AIQ) was shown to be reduced. An improvement in catalyst stability was discovered, ascribed to the synergistic effects of the PTH moieties. The catalyst, operating through a photolytic single‐electron transfer, was utilized for photo‐catalyzed dehalogenation and borylation. Evaluation of the catalytic mechanism in the borylation reaction showed that the improved performance results from the more efficient formation of the electron donor‐acceptor (EDA) complex with the cage. This discovery provides a potential strategy to improve the photophysical properties and stabilities of small‐molecule organic photocatalysts via supramolecular chemistry.

Chemistry↗
DOE OSTI2022

On phosphorus chemical shift anisotropy in metal (IV) phosphates and phosphonates: A 31 P NMR experimental study

The phosphorus chemical shift anisotropies, 31 PΔcs, and asymmetry parameters η were measured by the 31 P{ 1 H} NMR experiments in static and low-frequency spinning samples of the zirconium phosphates and phosphonates and also in the mixed Zr (IV)/Sn (IV) phosphate/phosphonate material. The data obtained have shown a 111 connectivity in the HPO 4 and PO 3 groups, which does not change at modification and intercalation of the materials. The 31 PΔcs values of the phosphonate groups (43–49 ppm) significantly surpass the values characterizing the HPO 4 groups (23–37 ppm). The 31 P Δcs values obtained for the metal (IV) phosphates were discussed in terms of P-O distances. Finally, the 31 P chemical shift anisotropy parameters can help at elucidation of local structures in phosphate and phosphonate materials.

1H MAS NMR↗
DOE OSTI2022

Elucidating structure and dynamics of crystalline α-zirconium phosphates intercalated with water and methanol by multinuclear solid-state MAS NMR: A comprehensive NMR approach

Solid-state NMR experiments on 2 H, 31 P, 13 C, and 1 H nuclei, including 31 P T 1 , 1 H T 1 , and 1 H T 1ρ measurements, as well as on the kinetics of proton-phosphorus cross-polarization have been performed to characterize the crystalline and amorphous α-zirconium phosphates, which were intercalated with D 2 O and/or CD 3 OD. The 13 C{ 1 H} CP MAS NMR experiment performed for compound 1-CD 3 OD (Zr (HPO 4 ) 2 .0.2CD 3 OD) with carbon cross-polarization via protons of phosphate groups has provided a prove that the methanol was intercalated into the interlayer spaces of this compound. The variable-temperature 2 H solid-echo MAS NMR spectra of intercalated compounds demonstrated that the methanol molecules, in contrast to the mobile water, were immobile, keeping, however, free CD 3 rotations around the C 3 -axis. It has been demonstrated that the intercalated species, D 2 O and CD 3 OD, do not affect the high-frequency motions of the phosphate groups. By utilizing local structural models that satisfy the constraints of the experimental data, it has been suggested that the immobile methanol molecules are located in the cavity between two neighboring layers of the zirconium phosphates. Here, the present work illustrates the reliable criteria in a comprehensive NMR approach to structural and dynamic studies of such systems.

1H↗
DOE OSTI2021

Unexpected structural/motional mode of water intercalated into an α-crystalline zirconium phosphate deduced by 31 P and 2 H solid-state MAS NMR spectra

Here, in developing the approach to understanding dynamics of intercalates in layered materials, crystalline-layered zirconium phosphate Zr (HPO 4 ) 2 ·0.35D2O has been prepared and characterized by the 1 H, 31 P, and 2 H solid-state MAS NMR spectra, including 31 P and 2 H T 1 measurements. At temperatures >253 K, the intercalated water shows two spectrally-distinguished deuterons unprecedentedly with different DQCC's and 2 H T 1 times, one of which is hydrogen bonded. The collected data allowed to identify an unexpected bonding/dynamic mode of water molecules, which experience fast rotation around the hydrogen bond, formed with a zirconium-coordinated oxygen. The low-temperature 2 H MAS NMR experiments have demonstrated the presence of additional hydrogen bond P—(H)O˙˙˙ DO, population of which grows on cooling to 195 K corresponding to the doubly hydrogen-bonded immobile water molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗
DOE OSTI2021

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗
DOE OSTI2020

Thermally Activated Adsorption in Metal–Organic Frameworks with a Temperature‐Tunable Diffusion Barrier Layer

Abstract Modification of the external surfaces of metal–organic frameworks offers a new level of control over their adsorption behavior. It was previously shown that capping of MOFs with ethylenediamine (EDA) can effectively retain small gaseous molecules at room temperature. Reported here is a temperature‐induced variation in the capping‐layer gate‐opening mechanism through a combination of in situ infared experiments and ab initio simulations of the capping layer. An atypical acceleration and increase in the loading of weakly adsorbed molecules upon raising the temperature above room temperature is observed. These findings show the discovery of novel temperature‐dependent kinetics that goes beyond standard kinetics and suggest a new avenue for tailoring selective adsorption by thermally tuning the surface barrier.

Tan, Kui↗
DOE OSTI2020

Stepwise Assembly of Turn‐on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

Abstract The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn‐on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene‐based fluorescent linker and a hemicyanine‐containing CN − ‐responsive linker were sequentially installed into the lattice of PCN‐700. The selective binding of CN − to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn‐on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine‐tuned in order to maximize the sensitivity of the overall framework. The optimized MOF‐sensor had a CN − ‐detection limit of 0.05 μ m , which is much lower than traditional CN − fluorescent sensors (about 0.2 μ m ).

Li, Jialuo↗
DOE OSTI2020

Rapid Generation of Hierarchically Porous Metal–Organic Frameworks through Laser Photolysis

Abstract Hierarchically porous metal–organic frameworks (HP‐MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP‐MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP‐MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing‐cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP‐MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.

Wang, Kun‐Yu↗
DOE OSTI2020

Rapid Generation of Hierarchically Porous Metal–Organic Frameworks through Laser Photolysis

Hierarchically porous metal–organic frameworks (HP-MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP-MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP-MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing-cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP-MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗