Search NASA⌕ Search

Engineering topics

Zhou, Hongyao

Publications and source records attributed to Zhou, Hongyao.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Designing polymer coatings for lithium metal protection

Abstract Protection of lithium metal has been one of the great challenges to realize a long-life, high-energy-density battery. Polymer coatings on lithium metal surface have been proven to be an effective protection method in terms of improved morphology, higher coulombic efficiency, and a longer cycle life. However, there is a variety of design principles of polymer coatings proposed by the research community, and the influence of polymer swelling in liquid electrolytes remains poorly understood. Herein we use crosslinking density and solvent–polymer interaction to quantitatively explain the mechanical property and the ion-transport property of polymer coatings when swollen in liquid electrolytes. Low crosslinking density is beneficial for reducing the rigidity and enhancing the viscosity of the polymer. Ion conductivity increases with the swelling ratio, and activation energy of lithium-ion transport increases in a polar polymer with strong ion–polymer coupling. We propose that polymer coatings must be combined with the emerging electrolytes with unconventional solvent compositions to realize a practical high-performance lithium metal battery. This study can provide design guidelines for polymer coatings through the optimized interactions with upcoming high-performance electrolytes.

Materials Science↗
DOE OSTI2020

An anode-free Li metal cell with replenishable Li designed for long cycle life

Pit corrosion of Li during stripping is an important factor responsible for poor Li cycling efficiency, a metric that determines its cycling life. When excess Li is present, it has been observed that Li tends to strip in a non-uniform fashion, forming pits that extend well past the theoretical Li depth that inevitably lead to the formation of electronically isolated “dead” Li particles. In this work, a novel cell with replenishable Li is shown to inherently mitigate the formation of this “dead” Li, as a direct result of a design in which the intrinsically more homogenous stripping behavior of anode-free cells are combined with a replenishable limited Li reservoir. These novel cells (Li|Cu||LiFePO 4 ) exhibit 25% and 34% higher cumulative capacities than the conventional cells (Cu|Li||LiFePO 4 ) in carbonate and ether electrolytes, respectively, enabling a significant increase in cycle life without impacting energy density. This improvement strategy represents a new direction in Li metal battery improvement, in which improved cycling can be achieved regardless of electrolyte chemistry.

Long cycle life↗
DOE OSTI2020

Ultrahigh coulombic efficiency electrolyte enables Li||SPAN batteries with superior cycling performance

Raising the coulombic efficiency of lithium metal anode cycling is the deciding step in realizing long-life rechargeable lithium batteries. Here, we designed a highly concentrated salt/ether electrolyte diluted in a fluorinated ether: 1.8 M LiFSI in DEE/BTFE (diethyl ether/bis(2,2,2-trifluoroethyl)ether), which realized an average coulombic efficiency of 99.37% at 0.5 mA cm -2 and 1 mAh cm -2 for more than 900 cycles. This electrolyte also maintained a record coulombic efficiency of 98.7% at 10 mA cm -2 , indicative of its ability to provide fast-charging with high cathode loadings. Morphological studies reveal dense, dendrite free Li depositions after prolonged cycling, while surface analyses confirmed the formation of a robust LiF-rich SEI layer on the cycled Li surface. Moreover, we discovered that this ether-based electrolyte is highly compatible with the low-cost, high-capacity SPAN (Sulfurized polyacrylonitrile) cathode, where the constructed Li||SPAN cell exhibited reversible cathode capacity of 579 mAh g -1 and no capacity decay after 1200 cycles. A cell where a high areal loading SPAN electrode (>3.5 mAh cm -2 ) is paired with only onefold excess Li was constructed and cycled at 1.75 mA cm -2 , maintaining a coulombic efficiency of 99.30% for the lithium metal. Computational simulations revealed that at saturation, the Li-FSI complex forms contact ion pairs, with a first solvation shell comprising DEE molecules, and a second solvation shell with a mix of DEE/BTFE. This study provides a path to enable high energy density Li||SPAN batteries with stable cycling.

36 MATERIALS SCIENCE↗