Search NASA⌕ Search

Engineering topics

Zhou, Min

Publications and source records attributed to Zhou, Min.

At least 19 records

Computational prediction of dielectric breakdown strength of a transformer paper in oil with uncertainty quantification

The determination of the dielectric breakdown strengths of microstructurally heterogeneous materials has been a primarily experimental endeavor. We report the development of a microstructure-level model for computationally predicting the breakdown strength and analyzing the interactions between electromagnetic pulses (EMP) and the constituents in a composite of cellulose-based paper and mineral oil found in electrical transformers. The model allows explicit simulation of the material breakdown process by tracking the transition of dielectric constituents from non-conductive to conductive states. The focus is on the electric fields induced in the materials and the overall conditions for dielectric breakdown (defined as the onset of avalanche) caused by the electric field induced in the composite. Responses to three distinct pulse shapes, i.e., Steep Front (SF), Lightning (L), and AC with spectra spanning 60–9 × 105 Hz are considered. It is found that the breakdown strength of the material is significantly affected by microstructure heterogeneities, the spatial variations of the constituent properties, and the pulse shapes. A probabilistic characterization of the breakdown strength is computationally obtained and compared with experimental measurements. Although one particular material is analyzed, the model and approach are applicable to other heterogeneous materials as well.

breakdowns↗

Tailoring activity of iron phthalocyanine by edge-nitrogen sites induced electronic delocalization

Fe-N-C catalysts have been recognized as the most satisfactory candidates alternatively to Pt-based catalysts for oxygen reduction reaction (ORR). However, fine-tailoring of their intrinsic ORR catalytic activity still remains a great challenge due to the inferior accessibility and intrinsic activity of FeN x moieties. Herein, one order of magnitude activity enhancement of pristine Fe-N-C through cooperating with nitrogen-doped carbon micro-flower is achieved. The axial coordination effect between Fe active center and nitrogen atoms in support can break the electronic distribution symmetry of FeN x moieties and induce the electron delocalization on Fe active center and the electron localization on N, respectively, which favor the adsorption behavior of *OH intermediate. As a result, the catalyst exhibits a remarkable half-wave potential of 0.9 V and a high kinetic current density of 74.04 mA cm -2 at 0.85 V. In addition, when utilized as a cathode catalyst of liquid Zn-air batteries (ZABs), it possesses excellent electrochemical performance, for example, a high open circuit voltage (OCV) and peak power density of 1.59 V and 170.09 mW cm -2 , respectively. In conclusion, this work provides a new understanding into the activity enhancement mechanism of Fe-N-C catalysts, and inspires electronic delocalization of active sites for adjusting catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of void positioning on the detonation sensitivity of a heterogeneous energetic material

We show although it is well-established that voids profoundly influence the initiation and reaction behaviors of heterogeneous energetic materials such as polymer-bonded explosives (PBX) and propellants, there has been little study of how void location in different constituents in the microstructures of such materials affect the macroscale behavior. Here, we use three-dimensional (3D) mesoscale simulations to study how void placement within the reactive grains versus the polymer binder influences the shock-to-detonation transition (SDT) in a polymer-bonded explosive. The material studied here has a microstructure comprised of 75% PETN (pentaerythritol tetranitrate) grains and 25% HTPB (hydroxyl-terminated polybutadiene) polymer binder by volume. Porosities up to 10% in the form of spherical voids distributed in both the grains and polymer are considered. An Arrhenius reactive burn relation is used to model the chemical kinetics of the PETN grains under shock loading, thereby resolving the heterogeneous detonation behavior of the PBX. The influence of void location on the shock initiation sensitivity of the material is quantitatively ranked by comparing the predicted run distance to detonation (RDD) for each sample. The analysis includes inherent quantification of uncertainties arising from the stochastic variations in the microstructure morphologies and void distributions by using statistically equivalent microstructure sample sets (SEMSS), leading to probabilistic formulations for the RDD as a function of shock pressure. The calculations reveal that the location of voids in the composite microstructure significantly affects the RDD. Specifically, voids exclusively within the grains cause the PBX to be more sensitive (having shorter RDD) than voids in the polymer binder. Unique probabilistic relationships are derived to map the probability of observing RDD for each void location material case, allowing for prediction of initiation behavior anywhere in the shock pressure – RDD space. These findings agree with trends reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Probabilistic Shock Initiation Thresholds of Energetic Materials Through Evolution of Thermal-Mechanical Dissipation and Reactive Heating

The ignition threshold of an energetic material (EM) quantifies the macroscopic conditions for the onset of self-sustaining chemical reactions. The threshold is an important theoretical and practical measure of material attributes that relate to safety and reliability. Historically, the thresholds are measured experimentally. In this work, we present a new Lagrangian computational framework for establishing the probabilistic ignition thresholds of heterogeneous EM out of the evolutions of coupled mechanical-thermal-chemical processes using mesoscale simulations. Furthermore, the simulations explicitly account for microstructural heterogeneities, constituent properties, and interfacial processes and capture processes responsible for the development of material damage and the formation of hotspots in which chemical reactions initiate. The specific mechanisms tracked include viscoelasticity, viscoplasticity, fracture, post-fracture contact, frictional heating, heat conduction, reactive chemical heating, gaseous product generation, and convective heat transfer. To determine the ignition threshold, the minimum macroscopic loading required to achieve self-sustaining chemical reactions with a rate of reactive heat generation exceeding the rate of heat loss due to conduction and other dissipative mechanisms is determined. Probabilistic quantification of the processes and the thresholds are obtained via the use of statistically equivalent microstructure sample sets (SEMSS). The predictions are in agreement with available experimental data.

36 MATERIALS SCIENCE↗

Sensor Domain of Histidine Kinase VxrA of Vibrio cholerae : Hairpin-Swapped Dimer and Its Conformational Change

VxrA and VxrB are cognate histidine kinase (HK)-response regulator (RR) pairs of a two-component signaling system (TCS) found in Vibrio cholerae, a bacterial pathogen that causes cholera. The VxrAB TCS positively regulates virulence, the type VI secretion system, biofilm formation, and cell wall homeostasis in V. cholerae, providing protection from environmental stresses and contributing to the transmission and virulence of the pathogen. The VxrA HK has a unique periplasmic sensor domain (SD) and, remarkably, lacks a cytoplasmic linker domain between the second transmembrane helix and the dimerization and histidine phosphotransfer (DHp) domain, indicating that this system may utilize a potentially unique signal sensing and transmission TCS mechanism. Here, we have determined several crystal structures of VxrA-SD and its mutants. These structures reveal a novel structural fold forming an unusual β hairpin-swapped dimer. A conformational change caused by relative rotation of the two monomers in a VxrA-SD dimer could potentially change the association of transmembrane helices and, subsequently, the pairing of cytoplasmic DHp domains. Based on the structural observation, we propose a putative scissor-like closing regulation mechanism for the VxrA HK. IMPORTANCE V. cholerae has a dynamic life cycle, which requires rapid adaptation to changing external conditions. Two-component signal transduction (TCS) systems allow V. cholerae to sense and respond to these environmental changes. The VxrAB TCS positively regulates a number of important V. cholerae phenotypes, including virulence, the type six secretion system, biofilm formation, and cell wall homeostasis. Here, we provide the crystal structures of the VxrA sensor histidine kinase sensing domain and propose a mechanism for signal transduction. The cognate signal for VxrAB remains unknown; however, in this work we couple our structural analysis with functional assessments of key residues to further our understanding of this important TCS.

59 BASIC BIOLOGICAL SCIENCES↗

Bortezomib activation of mTORC1 pathway mediated by NOX2-drived reactive oxygen species results in apoptosis in primary dorsal root ganglion neurons

Highlights: • Bort induces apoptosis in DRG neurons. • Bort activates mTORC1 pathway in DRG neurons. • Bort-activated mTORC1 pathway contributes to DRG neuronal apoptosis. • Bort activates mTORC1 pathway via NOX2-drived ROS overgeneration leading to DRG neuronal apoptosis. Bortezomib (Bort), a chemotherapeutic agent, is widely used for the clinical treatment of cancers. However, Bort-induced peripheral neurotoxicity (BIPN) significantly restricts its clinical application, which is difficult to deal with since the underlying mechanisms of BIPN are unclear. Here, we showed that Bort activates mTORC1 pathway leading to dorsal root ganglion (DRG) neuronal apoptosis. Inhibition of mTORC1 with rapamycin or knockdown of raptor, regulatory-associated protein of mTORC1, with shRNA dramatically rescued the cells from Bort-caused apoptosis. In addition, we found that Bort-activated mTORC1 pathway was attributed to Bort elevation of reactive oxygen species (ROS). This is supported by the evidence that using ROS scavenger N-acetyl cysteine (NAC) significantly alleviated Bort-activated mTORC1 pathway. Furthermore, we revealed that upregulation of NOX2 contributed to Bort-elicited ROS overproduction, leading to mTORC1 pathway-dependent apoptosis in DRG neurons. Inhibition of NOX2 with apocynin remarkably diminished Bort-induced overgeneration of ROS, activation of mTORC1 pathway and apoptosis in the cells. Taken together, these results indicate that Bort activation of mTORC1 pathway mediated by NOX2-drived ROS leads to apoptotic death in DRG neurons. Our findings highlight that manipulation of intracellular ROS level or NOX2 or mTORC1 activity may be exploited for prevention of BIPN.

60 APPLIED LIFE SCIENCES↗

High-speed x-ray phase contrast imaging and digital image correlation analysis of microscale shock response of an additively manufactured energetic material simulant

The performance of energetic materials subjected to dynamic loading significantly depends on their micro- and meso-scale structural morphology. The geometric versatility offered by additive manufacturing opens new pathways to tailor the performance of these materials. Additively manufactured energetic materials (AMEMs) have a wide range of structural characteristics with a hierarchy of length scales and process-inherent heterogeneities, which are hitherto difficult to precisely control. It is important to understand how these features affect AMEMs’ response under dynamic/shock loading. Therefore, temporally and spatially resolved measurements of both macroscopic behavior and micro- and meso-level processes influencing macroscopic behavior are required. In this paper, we analyze the shock compression response of an AMEM simulant loaded under several impact conditions and orientations. Furthermore, x-ray phase contrast imaging (PCI) is used to track features across the observed shock front and determine the linear shock velocity vs particle velocity equation of state, as well as to quantify the interior deformation fields via digital image correlation (DIC) analyses. Photon Doppler velocimetry is simultaneously used to measure the particle velocities of the specimens, which are consistent with those obtained from x-ray PCI. The DIC analyses provide an assessment of the average strain fields inside the material, showing that the average axial strain depends on the loading intensity and reaches as high as 0.23 for impact velocities up to 1.5 km/s. The overall results demonstrate the utility of x-ray PCI for probing “in-material” equation of state and interior strains associated with dynamic shock compression behavior of the AMEM simulant.

3D printing↗

Prediction of Probabilistic Detonation Threshold via Millimeter-Scale Microstructure-Explicit and Void-Explicit Simulations

We present an approach and relevant models for predicting the probabilistic shoc-to-detonation transition (SDT) behavior and Pop plot (PP) of heterogeneous energetic materials (HEM) via mesoscopic microstructure-explicit (ME) and void explicit (VE) simulations at the millimeter (mm) sample size scale. Although the framework here is general, the particular material considered in this paper is pressed Octahydro-1,3,5,7-tetranitro-1,2,3,5-tetrazocine (HMX). To systematically delineate the effects of material heterogeneities, four material cases are considered. These cases are homogeneous material, material with granular microstructure but no voids, homogeneous material with voids, and material with both granular microstructure and voids. Statistically equivalent microstructure sample sets (SEMSS) are generated and used. Eulerian hydrocode simulations explicitly resolve the material heterogeneities, voids, and the coupled mechanical-thermal-chemical processes. In particular, it is found that both microstructure and voids strongly influence the SDT behavior and PP. The effects of different combinations of microstructure heterogeneity and voids on the SDT process and PP are quantified and rank-ordered. The overall framework uses the Mie–Grüneisen equation of state and a history variable reactive burn model (HVRB). A novel probabilistic representation for quantifying the PP is developed, allowing the calculation of (1) the probability of observing SDT at a given combination of shock pressure and run distance, (2) the run-distance to detonation under a given combination of shock pressure and prescribed probability, and (3) the shock pressure required for achieving SDT at a given run distance with a prescribed probability. The results are in agreement with general trends in experimental data in the literature.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Structural and functional characterization of three Type B and C chloramphenicol acetyltransferases from Vibrio species

Chloramphenicol acetyltransferases (CATs) were among the first antibiotic resistance enzymes identified and have long been studied as model enzymes for examining plasmid-mediated antibiotic resistance. These enzymes acetylate the antibiotic chloramphenicol, which renders it incapable of inhibiting bacterial protein synthesis. CATs can be classified into different types: Type A CATs are known to be important for antibiotic resistance to chloramphenicol and fusidic acid. Type B CATs are often called xenobiotic acetyltransferases and adopt a similar structural fold to streptogramin acetyltransferases, which are known to be critical for streptogramin antibiotic resistance. Type C CATs have recently been identified and can also acetylate chloramphenicol, but their roles in antibiotic resistance are largely unknown. In this work, we structurally and kinetically characterized three Vibrio CAT proteins from a nonpathogenic species ( Aliivibrio fisheri ) and two important human pathogens ( Vibrio cholerae and Vibrio vulnificus ). We found all three proteins, including one in a superintegron ( V. cholerae ), acetylated chloramphenicol, but did not acetylate aminoglycosides or dalfopristin. We also determined the 3D crystal structures of these CATs alone and in complex with crystal violet and taurocholate. These compounds are known inhibitors of Type A CATs, but have not been explored in Type B and Type C CATs. Based on sequence, structure, and kinetic analysis, we concluded that the V. cholerae and V. vulnificus CATs belong to the Type B class and the A. fisheri CAT belongs to the Type C class. Ultimately, our results provide a framework for studying the evolution of antibiotic resistance gene acquisition and chloramphenicol acetylation in Vibrio and other species.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of Oxygen Vacancy on the Magnetic Properties of Ni-Doped SnO{sub 2} Nanoparticles

We studied the ferromagnetism of Ni-doped SnO{sub 2} with and without oxygen vacancy (V{sub O}) by experiments and calculations. Sn{sub 0.96}Ni{sub 0.04}O{sub 2} nanocrystalline powder prepared by the sol-gel method exhibits room-temperature ferromagnetism, and the vacuum annealing reduces its saturation magnetizations. The density functional theory (DFT) calculations show that the doped Ni atom can introduce a local magnetic moment of about 2.0 μ{sub B} in SnO{sub 2} (110) surface, which is ascribed to the spin-polarization of Ni 3d and O 2p electrons. The type of preferential magnetic coupling of Ni-doped SnO{sub 2} (110) surface depends upon the distributions of Ni dopants, and ferromagnetic coupling is more favorable in most cases. Introduction of V{sub O} obviously weakens the ferromagnetic interaction of Ni-doped SnO{sub 2} (110) surface, which can give a reasonable explanation for our experimental observations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural analysis of free and liganded forms of the Fab fragment of a high-affinity anti-cocaine antibody, h2E2

A high-affinity anti-cocaine monoclonal antibody, designated h2E2, is entering phase 1 clinical trials for cocaine abuse therapy. To gain insight into the molecular details of its structure that are important for binding cocaine and cocaine metabolites, the Fab fragment was generated and crystallized with and without ligand. Structures of the unliganded Fab and the Fab fragment bound to benzoylecgonine were determined, and were compared with each other and with other crystallized anti-cocaine antibodies. The affinity of the h2E2 antibody for cocaine is 4 nM, while that of the cocaine metabolite benzoylecgonine is 20 nM. Both are higher than the reported affinity for cocaine of the two previously crystallized anti-cocaine antibodies. Consistent with cocaine fluorescent quenching binding studies for the h2E2 mAb, four aromatic residues in the CDR regions of the Fab (TyrL32, TyrL96, TrpL91 and TrpH33) were found to be involved in ligand binding. The aromatic side chains surround and trap the tropane moiety of the ligand in the complex structure, forming significant van der Waals interactions which may account for the higher affinity observed for the h2E2 antibody. A water molecule mediates hydrogen bonding between the antibody and the carbonyl group of the benzoyl ester. Finally, the affinity of binding to h2E2 of benzoylecgonine differs only by a factor of five compared with that of cocaine; therefore, it is suggested that h2E2 would bind cocaine in the same way as observed in the Fab–benzoylecgonine complex, with minor rearrangements of some hypervariable segments of the antibody.

59 BASIC BIOLOGICAL SCIENCES↗

Solvent-free and rapid synthesis of mesoporous Pt–iron oxide catalysts via mechanochemical assembly

Mesoporous Fe x O y and Pt@Fe x O y have proven promising performance in catalysis. Yet, current methods usually use wet chemistry, which poses several drawbacks. Here, we introduce a simple process of mechanochemical assembly between an iron salt and a triblock copolymer in the solid state that can not only directly form abundant mesopores into Fe x O y , but also enable a high dispersion of Pt species at the nm or sub-nm scale. In this regard, mesoporous FexOy and Pt@Fe x O y catalysts with high surface areas (up to 149 m 2 g -1 ) and narrow pore size distributions (~5 nm) can be obtained in a solvent-free and rapid (0.5 h) way. The kinetic energy and frictional heating of ball milling are expected to promote the interaction and diffusion between iron precursors and surfactants, while the solvent-free feature confines their assembly to the mesophase of the P123 copolymer. Moreover, these Pt@Fe x O y catalysts provide good activity in the total oxidation of propylene and CO.

36 MATERIALS SCIENCE↗

Comparison of Chimney Technique and Single-Branched Stent Graft for Treating Patients with Type B Aortic Dissections that Involved the Left Subclavian Artery

Objective: To compare the short-term efficiency of two different endovascular repairs for type B aortic dissection involving the left subclavian artery. Methods: From February 2013 to March 2016, a cohort of 43 patients with TBADs involving the LSA underwent thoracic endovascular aortic repair (TEVAR) in two departments, consisting of 22 (Group A) with chimney grafts (CGs) and 21 (Group B) with single-branched stent graft (SBSG). Results of the two groups in perioperative and follow-up period (≥ 3 months) were comparatively analyzed, especially on aortic remodeling. Results: Endoluminal repair of the two groups was successfully carried out. The median follow-up period was 19 months (range, 3–43 months) in Group A and 12 months in Group B (range, 6–32 months). During the TEVAR, one CG compression occurred in Group A and one type I endoleak in Group B. During follow-up, four complications occurred in Group A (two CGs occlusion, one type I endoleak and one death from dissecting aneurysm rupture), compared with two occurred in Group B (one sidearm graft twist and one death from myocardial infarction). Complete thrombosis of the false lumen (FL) in thoracic aorta was revealed in 83.3% (15/18) cases in Group A and 89.5% (17/19) in Group B. Partial thrombosis of the FL was revealed in 16.7% (3/18) cases in Group A and 10.5% (2/19) in Group B. In the abdominal aorta, complete thrombosis of the FL was noted in 23.1% (3/13) cases in Group A and 36.4% (4/11) in Group B. Partial thrombosis of the FL was revealed in 76.9% (10/13) cases in Group A and 63.6% (7/11) in Group B. Significant true lumen re-expansion and false lumen regression were observed in different levels of the descending aorta by computed tomography angiography (CTA) in both Groups A and B (P < 0.05). No significant diametric changes of abdominal aorta were found during follow-up in both groups. Conclusions: For patients with TBADs involving the LSA, the chimney technique and the SBSG revealed comparable results. Further evaluation of more patients with longer follow-up is needed to substantiate these results.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Ignition thresholds of aluminized HMX-based polymer-bonded explosives

Here, the ignition of aluminized HMX-based polymer-bonded explosives (PBXs) under shock loading is studied via mesoscale simulations. The conditions analyzed concern loading pulses of 20 nanoseconds to 0.8 microseconds in duration and impact piston velocities on the order of 400-1000 m/s or loading stresses on the order of 3-14 GPa. The sets of samples studied have stochastically similar microstructures consisting of a bimodal distribution of HMX grains, an Estane binder, and aluminum particles 50-100 µm in diameter. The computational model accounts for constituent elasto-viscoplasticity, viscoelasticity, bulk compressibility, fracture, interfacial debonding, internal contact, bulk and frictional heating, and heat conduction. The analysis focuses on the development of hotspots under different material settings and loading conditions. In particular, the ignition thresholds in the forms of the James relation and the Walker-Wasley relation and the corresponding ignition probability are calculated and expressed as functions of the aluminum volume fraction for the PBXs analyzed. Lastly, it is found that the addition of aluminum raises the ignition thresholds, causing the materials to be less sensitive. Dissipation and heating mechanism changes responsible for this trend are delineated.

36 MATERIALS SCIENCE↗