Search NASA⌕ Search

Engineering topics

Zhou, Min

Publications and source records attributed to Zhou, Min.

40 records · Page 3

Density functional theory study of the mechanism of Li diffusion in rutile RuO{sub 2}

First-principle calculations are carried out to study the diffusion of Li ions in rutile structure RuO{sub 2}, a material for positive electrodes in rechargeable Li ion batteries. The calculations focus on migration pathways and energy barriers for diffusion in Li-poor and Li-rich phases using the Nudged Elastic Band Method. Diffusion coefficients estimated based on calculated energy barriers are in good agreement with experimental values reported in the literature. The results confirm the anisotropic nature of diffusion of Li ions in one-dimensional c channels along the [001] crystalline direction of rutile RuO{sub 2} and show that Li diffusion in the Li-poor phase is faster than in the Li-rich phase. The findings of fast Li diffusion and feasible Li insertion at low temperatures in the host rutile RuO{sub 2} suggest this material is a good ionic conductor for Li transport. The finding also suggests possible means for enhancing the performance of RuO{sub 2}-based electrode materials.

36 MATERIALS SCIENCE↗

Structural characterization and comparison of three acyl-carrier-protein synthases from pathogenic bacteria

The structural characterization of acyl-carrier-protein synthase (AcpS) from three different pathogenic microorganisms is reported. One interesting finding of the present work is a crystal artifact related to the activity of the enzyme, which fortuitously represents an opportunity for a strategy to design a potential inhibitor of a pathogenic AcpS. Some bacterial type II fatty-acid synthesis (FAS II) enzymes have been shown to be important candidates for drug discovery. The scientific and medical quest for new FAS II protein targets continues to stimulate research in this field. One of the possible additional candidates is the acyl-carrier-protein synthase (AcpS) enzyme. Its holo form post-translationally modifies the apo form of an acyl carrier protein (ACP), which assures the constant delivery of thioester intermediates to the discrete enzymes of FAS II. At the Center for Structural Genomics of Infectious Diseases (CSGID), AcpSs from Staphylococcus aureus (AcpS{sub SA}), Vibrio cholerae (AcpS{sub VC}) and Bacillus anthracis (AcpS{sub BA}) have been structurally characterized in their apo, holo and product-bound forms, respectively. The structure of AcpS{sub BA} is emphasized because of the two 3′, 5′-adenosine diphosphate (3′, 5′-ADP) product molecules that are found in each of the three coenzyme A (CoA) binding sites of the trimeric protein. One 3′, 5′-ADP is bound as the 3′, 5′-ADP part of CoA in the known structures of the CoA–AcpS and 3′, 5′-ADP–AcpS binary complexes. The position of the second 3′, 5′-ADP has never been described before. It is in close proximity to the first 3′, 5′-ADP and the ACP-binding site. The coordination of two ADPs in AcpS{sub BA} may possibly be exploited for the design of AcpS inhibitors that can block binding of both CoA and ACP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Generation of Few-Layer Graphene Coatings on SnO 2 -SiC Core-Shell Nanoparticles for High-Performance Lithium-Ion Storage

A simple ball-milling method is used to synthesize a tin oxide-silicon carbide/few-layer graphene core-shell structure in which nanometer-sized SnO 2 particles are uniformly dispersed on a supporting SiC core and encapsulated with few-layer graphene coatings by in situ mechanical peeling. The SnO 2 -SiC/G nanocomposite material delivers a high reversible capacity of 810 mA h g -1 and 83% capacity retention over 150 charge/discharge cycles between 1.5 and 0.01 V at a rate of 0.1 A g -1 . A high reversible capacity of 425 mA h g -1 also can be obtained at a rate of 2 A g -1 . When discharged (Li extraction) to a higher potential at 3.0 V (vs. Li/Li + ), the SnO 2 -SiC/G nanocomposite material delivers a reversible capacity of 1451 mA h g -1 (based on the SnO 2 mass), which corresponds to 97% of the expected theoretical capacity (1494 mA h g -1 , 8.4 equivalent of lithium per SnO 2 ), and exhibits good cyclability. This result suggests that the core-shell nanostructure can achieve a completely reversible transformation from Li 4.4 Sn to SnO 2 during discharging (i.e., Li extraction by dealloying and a reversible conversion reaction, generating 8.4 electrons). Finally, this suggests that simple mechanical milling can be a powerful approach to improve the stability of high-performance electrode materials involving structural conversion and transformation.

Environmental Molecular Sciences Laboratory↗