Search NASA⌕ Search

Engineering topics

Zhou, Qiang

Publications and source records attributed to Zhou, Qiang.

At least 19 records

Sustainable bioleaching of lithium-ion batteries for critical metal recovery: Process optimization through design of experiments and thermodynamic modeling

Recycling spent lithium-ion batteries (LIBs) could alleviate supply risks for critical metals and be less harmful to the environment compared to new production of metals from mining. Developing a cost-effective LIB bioleaching process could be a promising alternative to traditional energy-intensive recycling technologies. Here, this study aimed to optimize bioleaching conditions for maximum economic competitiveness through design of experiments using iterative response surface methodology (RSM), assisted by thermodynamic modeling. The optimal condition was identified as 2.5% pulp density in 75 mM gluconic acid biolixiviant at 55°C for 30 h which could recover 57%–84% of nickel, 71%–86% of cobalt, and 100% of lithium and manganese, yielding a 17%–26% net profit margin. The recommended pulp density and acid concentrations, together with the observed metal solubilization, were supported by thermodynamic modeling predictions. Our study demonstrated that combining RSM with thermodynamic simulations could be a powerful tool for optimizing bioleaching conditions.

60 APPLIED LIFE SCIENCES↗

Analytical models of the strength and ductility of CNT reinforced metal matrix nano composites under elevated temperatures

Carbon nanotubes (CNTs) can greatly enhance the strength of metal matrix composites while resulting in ductility loss. This strength-ductility tradeoff dilemma always confines the development of material design and real-life applications. Here in this work, a temperature dependent strengthening analytical model is proposed for CNT reinforced metal matrix composites which considers three common strengthening mechanisms: Orowan looping effect, thermal expansion mismatch effect, and load bearing effect. The proposed model can predict composite material strength with different volume fractions of CNTs and under different temperatures. Combining the strengthening model with the stress based modified Mohr-Coulomb (sMMC) ductile fracture model, a ductility analytical model is then derived. This ductility analytical model includes the influences of temperature, multi-axial stress loading conditions, as well as the aforementioned three strengthening mechanisms. A good agreement has been achieved between literature published experimental data and analytical predictions for both composite material strength and ductility loss. The proposed two analytical models can provide a straightforward way to study the strength-ductility relationship for CNT reinforced metal matrix composites over a wide range of temperatures and different stress states, and then provide guidance on new material design and processing.

36 MATERIALS SCIENCE↗

Comprehensive Studies on Hot Compaction and Vibration-Assisted Compaction Tests of Aluminum Powder

Abstract Aluminum powder compaction was studied using both test and simulation. Cold compaction, hot compaction, and vibration-assisted (cold) compaction tests were conducted to achieve different density ratios. First, the hot compaction test (at 300 °C, compression pressure 140 MPa) improved about 6% compared with cold compaction under the same compression pressure. Second, although the relative density ratio does not obviously improve at a vibration-assisted (cold) compaction, the strength of the specimens made under vibration loading is much better than those of cold compaction. Additionally, finite element models with well-calibrated Drucker–Prager Cap (DPC) material constitutive model were built in abaqus/standard to simulate the powder compaction process. The results of the finite element model have very good correlations with test results up to the tested range, and this finite element model further predicts the loading conditions needed to achieve the higher density ratios. Two exponential equations of the predicted density ratio were obtained by combining the test data and the simulation results. A new analytical solution was developed to predict the axial pressure versus the density ratio for the powder compaction according to DPC material model. The results between the analytical solution and the simulation model have a very good match.

Engineering↗

HEXIM1 controls P-TEFb processing and regulates drug sensitivity in triple-negative breast cancer

The positive transcription elongation factor b (P-TEFb), composed of CDK9 and cyclin T, stimulates transcriptional elongation by RNA polymerase (Pol) II and regulates cell growth and differentiation. Recently, we demonstrated that P-TEFb also controls the expression of EMT regulators to promote breast cancer progression. In the nucleus, more than half of P-TEFb are sequestered in the inactive-state 7SK snRNP complex. Here, we show that the assembly of the 7SK snRNP is preceded by an intermediate complex between HEXIM1 and P-TEFb that allows transfer of the kinase active P-TEFb from Hsp90 to 7SK snRNP for its suppression. Down-regulation of HEXIM1 locks P-TEFb in the Hsp90 complex, keeping it in the active state to enhance breast cancer progression, but also rendering the cells highly sensitive to Hsp90 inhibition. Because HEXIM1 is often down-regulated in human triple-negative breast cancer (TNBC), these cells are particularly sensitive to Hsp90 inhibition. Our study provides a mechanistic explanation for the increased sensitivity of TNBC to Hsp90 inhibition.

59 BASIC BIOLOGICAL SCIENCES↗

Combined treatment with cinnamaldehyde and PTH enhances the therapeutic effect on glucocorticoid-induced osteoporosis through inhibiting osteoclastogenesis and promoting osteoblastogenesis

Highlights: • Administration with cinnamaldehyde and PTH together promoted bone formation compared with monotherapy in GIO rats. • Administration with cinnamaldehyde and PTH together promoted the expression of runx2 compared with monotherapy in GIO rats. • Administration with cinnamaldehyde and PTH together inhibited the expression of trap compared with monotherapy in GIO rats. • Administration with cinnamaldehyde and PTH together promoted the expression of ALP in vitro compared with monotherapy. The study was to investigate the effect of combining treatment with cinnamaldehyde and parathyroid hormone (1−34) (PTH) on glucocorticoid-induced osteoporosis (GIO) and compare with monotherapy. Forty Sprague-Dawley male rats with GIO were divided into four groups randomly: control group (CON group, N = 10); group that intragastric administration with cinnamaldehyde (CIN group, N = 10); group that subcutaneous injection with PTH, three times per week(PTH group, N = 10); both administration with cinnamaldehyde and PTH (CIN + PTH group, N = 10). Distal femurs were harvested for hematoxylin and eosin (H&E) staining, micro-CT scanning and immunohistochemical analysis. Murine mesenchymal stem cells were cultured and dealt with the presence of dexamethasone(DEX group), DEX + cinnamaldehyde(DEX + CIN group), DEX + PTH(DEX + PTH group) or DEX + cinnamaldehyde + PTH(DEX + CIN + PTH group). Alkaline phosphatase (ALP) staining was performed subsequently. The results showed that bone formation in CIN + PTH group was notably promoted compared with other groups. And the expression of tartrate-resistant acid phosphatase (trap) and runt-related transcription factor 2 (runx2) in CIN + PTH group were down-regulated and up-regulated respectively compared with PTH group. In vitro study revealed that ALP-positive cell number in DEX + CIN + PTH group was obviously enhanced compared with other groups. The study revealed that combined treatment with cinnamaldehyde and PTH enhances the therapeutic effect on GIO through inhibiting osteoclastogenesis and promoting osteoblastogenesis.

60 APPLIED LIFE SCIENCES↗

Elastic properties of single crystal hydrogen sulfide: A Brillouin scattering study under high pressure-temperature

We have performed high pressure-temperature Brillouin scattering measurements on single crystal hydrogen sulfide using externally heated diamond anvil cell techniques. The pressure dependences of the acoustic velocities, isothermal elastic constants, and moduli of single crystal hydrogen sulfide have been determined along four isotherms. Both elastic constants and moduli increase monotonously with pressure along each isotherm, while they show a decreased tendency with temperature elevated under the same pressure points. The experimental equation of state of single crystal hydrogen sulfide is obtained by fitting with a third-order Birch-Murnaghan and Tait equation. It is proposed that the effect of hydrogen bonds contributes to the unique tendency of elastic anisotropy in single crystal hydrogen sulfide. Through our work, we have extended the melting curve and phase diagram of hydrogen sulfide up to 12 GPa and 580 K.

36 MATERIALS SCIENCE↗

Investigation on Explosive Welding of Zr{sub 53}Cu{sub 35}Al{sub 12} Bulk Metallic Glass with Crystalline Copper

A Zr{sub 53}Cu{sub 35}Al{sub 12} bulk metallic glass (BMG) was welded to a crystalline Cu using explosive welding technique. The morphology and the composition of the composite were characterized using optical microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy and transmission electron microscopy. The investigation indicated that the BMG and Cu were tightly joined together without visible defects, and a thin diffusion layer appeared at the interface. The captured jet at the end of the welding region mostly comes from the Cu side. Amorphous and partially crystallized structures have been observed within the diffusion layer, but the BMG in close proximity to the interface still retains its amorphous state. Nanoindentation tests reveal that the interface exhibits an increment in hardness compared with the matrix on both sides.

36 MATERIALS SCIENCE↗

Coupling-Assisted Renormalization of Excitons and Vibrations in Compressed MoSe 2 –WSe 2 Heterostructure

Vertical heterostructures (HSs) constructed with two-dimensional (2D) materials is expected to generate fascinating properties due to interlayer coupling between neighboring layers. However, interlayer coupling can be easily obscured by cross-contamination during transfer processes, rendering their experimental demonstration challenging. Here, we explore the coupling-assisted renormalization of excitons and vibrations in a mechanically fabricated MoSe 2 –WSe 2 HS through high-pressure photoluminescence, Raman spectra, and density functional theory calculations. Accompanied by the interlayer coupling enhancement, the excitonic and vibrational renormalizations involving dimensionality and composition variations were achieved. A cycle of 2D–3D–2D excitonic evolution was disclosed and pressure-induced emergence of X – exciton of MoSe 2 in HS was found reflecting the band structure transition in the MoSe 2 –WSe 2 HS. The Raman spectra reveals that the coupled A 2 " vibrations of WSe 2 and MoSe 2 in HS was stiffened and out-of-plane A 1 ' vibrations of WSe 2 and MoSe 2 in HS got coherent upon pressure modulation. Here, this coupling-assisted renormalization in MoSe 2 –WSe 2 HS can be extended to other 2D layered HSs, which indicates the possibility to design a flexible HS with controlled excitonic and vibrational system for light-emitting diodes, excitonic, and photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Dependent Light Emission of Charged and Neutral Excitons in Monolayer MoSe 2

Tailoring the excitonic properties in two-dimensional monolayer transition metal dichalcogenides (TMDs) through strain engineering is an effective means to explore their potential applications in optoelectronics and nanoelectronics. Here we report pressure-tuned photon emission of trions and excitons in monolayer MoSe 2 via a diamond anvil cell (DAC) through photoluminescence measurements and theoretical calculations. Under quasi-hydrostatic compressive strain, our results show neutral (X 0 ) and charged (X – ) exciton emission of monolayer MoSe 2 can be effectively tuned by alcohol mixture vs inert argon pressure transmitting media (PTM). During this process, X – emission undergoes a continuous blue shift until reaching saturation, while X 0 emission turns up splitting. Furthermore, the pressure-dependent charging effect observed in alcohol mixture PTM results in the increase of the X – exciton component and facilitates the pressure-tuned emission of X – excitons. This substantial tunability of X – and X 0 excitons in MoSe 2 can be extended to other 2D TMDs, which holds potential for developing strained and optical sensing devices.

36 MATERIALS SCIENCE↗

Structural basis for ELL2 and AFF4 activation of HIV-1 proviral transcription

The intrinsically disordered scaffold proteins AFF1/4 and the transcription elongation factors ELL1/2 are core components of the super elongation complex required for HIV-1 proviral transcription. Here we report the 2.0-Å resolution crystal structure of the human ELL2 C-terminal domain bound to its 50-residue binding site on AFF4, the ELLBow. The ELL2 domain has the same arch-shaped fold as the tight junction protein occludin. The ELLBow consists of an N-terminal helix followed by an extended hairpin that we refer to as the elbow joint, and occupies most of the concave surface of ELL2. This surface is important for the ability of ELL2 to promote HIV-1 Tat-mediated proviral transcription. The AFF4–ELL2 interface is imperfectly packed, leaving a cavity suggestive of a potential binding site for transcription-promoting small molecules.

60 APPLIED LIFE SCIENCES↗

Insights into HIV-1 proviral transcription from integrative structure and dynamics of the Tat:AFF4:P-TEFb:TAR complex

HIV-1 Tat hijacks the human superelongation complex (SEC) to promote proviral transcription. Here we report the 5.9 Å structure of HIV-1 TAR in complex with HIV-1 Tat and human AFF4, CDK9, and CycT1. The TAR central loop contacts the CycT1 Tat-TAR recognition motif (TRM) and the second Tat Zn 2+ -binding loop. Hydrogen-deuterium exchange (HDX) shows that AFF4 helix 2 is stabilized in the TAR complex despite not touching the RNA, explaining how it enhances TAR binding to the SEC 50-fold. RNA SHAPE and SAXS data were used to help model the extended (Tat Arginine-Rich Motif) ARM, which enters the TAR major groove between the bulge and the central loop. The structure and functional assays collectively support an integrative structure and a bipartite binding model, wherein the TAR central loop engages the CycT1 TRM and compact core of Tat, while the TAR major groove interacts with the extended Tat ARM.

59 BASIC BIOLOGICAL SCIENCES↗