Search NASA⌕ Search

Engineering topics

Zhou, Ye

Publications and source records attributed to Zhou, Ye.

At least 19 records

Shock-driven three-fluid mixing with various chevron interface configurations

When a shock wave crosses a density interface, the Richtmyer–Meshkov instability causes perturbations to grow. Richtmyer–Meshkov instabilities arise from the deposition of vorticity from the misaligned density and pressure gradients at the shock front. In many engineering applications, microscopic surface roughness will grow into multi-mode perturbations, inducing mixing between the fluid on either side of an initial interface. Applications often have multiple interfaces, some of which are close enough to interact in the later stages of instability growth. In this study, we numerically investigate the mixing of a three-layer system with periodic zigzag (or chevron) interfaces, calculating the dependence of the width and mass of mixed material on properties such as the shock timing, chevron amplitude, multi-mode perturbation spectrum, density ratio, and shock mach number. The multi-mode case is also compared with a single-mode perturbation. The Flash hydrodynamic code is used to solve the Euler equations in three dimensions with adaptive grid refinement. Key results include a significant increase in mixed mass when changing from a single-mode to a multi-mode perturbation on one of the interfaces. The mixed width is mainly sensitive to the density ratio and chevron amplitude, whereas the mixed mass also depends on the multi-mode spectrum. In conclusion, steeper initial perturbation spectra have lower mixed mass at early times but a greater mixed mass after the reflected shock transits back across the layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instabilities and Mixing in Inertial Confinement Fusion

By imploding fuel of hydrogen isotopes, inertial confinement fusion (ICF) aims to create conditions that mimic those in the Sun's core. This is fluid dynamics in an extreme regime, with the ultimate goal of making nuclear fusion a viable clean energy source. The fuel must be reliably and symmetrically compressed to temperatures exceeding 100 million degrees Celsius. After the best part of a century of research, the foremost fusion milestone was reached in 2021, when ICF became the first technology to achieve an igniting fusion fuel (thermonuclear instability), and then in 2022 scientific energy breakeven was attained. A key trade-off of the ICF platform is that greater fuel compression leads to higher burn efficiency, but at the expense of amplified Rayleigh–Taylor and Richtmyer–Meshkov instabilities and kinetic-energy-wasting asymmetries. In extreme cases, these three-dimensional instabilities can completely break up the implosion. Even in the highest-yielding 2022 scientific breakeven experiment, high-atomic-number (high-Z) contaminants were unintentionally injected into the fuel. Here we review the pivotal role that fluid dynamics plays in the construction of a stable implosion and the decades of improved understanding and isolated experiments that have contributed to fusion ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blue phases on patterned surfaces

Stable, macroscopic single-crystal chiral liquid crystal compositions are described. The compositions include a single-crystal chiral liquid crystal material on a patterned surface. The patterned surface seeds a particular crystallographic orientation at the substrate-liquid crystal interface. Also described are methods of forming the single-crystal chiral liquid crystal compositions.

de Pablo, Juan Jose↗

Shock tube experiments on the three-layer Richtmyer–Meshkov instability

Here, a vertical shock tube is used for experiments on the three-layer Richtmyer–Meshkov instability. Two closely spaced membrane-less interfaces are formed by the flow of two different sects of three gases: one with air above CO 2 above SF 6 and the other with helium above air above SF 6 . The lightest of the three gases enters the shock tube at the top of the driven section and flows downward. Conversely, the heaviest gas enters at the bottom of the shock tube and flows upward while the intermediate density gas enters at the middle through porous plates. All three gases are allowed to escape through holes at the layer location, leaving an approximately 30-mm layer of intermediate-density gas suspended between the lightest gas from above and the heaviest gas from below. A single-mode, two-dimensional initial perturbation is then imposed on the lower interface by oscillating the shock tube in the horizontal direction. The flow is visualized by seeding the intermediate gas with particles and illuminating it with a pulsed laser. Image sequences are then captured using high-speed video cameras. Perturbation amplitude measurements are made from the three-layer system and compared with measurements from 2, two-layer systems. It is observed that the presence of the upper, initially flat interface produces a decrease in growth of instability amplitude in the nonlinear phase over an equivalent single-interface configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulations of three-layer Richtmyer–Meshkov mixing in a shock tube

Here, the Richtmyer–Meshkov instability causes perturbations to grow after a shock traverses a fluid density interface. This increases the mixing rate between fluid from either side of the interface. We use the Flash Eulerian hydrodynamic code to investigate alterations when a thin third layer of intermediate density is placed along the interface, effectively creating two adjacent unstable interfaces. This is a common occurrence in engineering applications where a thin barrier initially separates two materials. We find that the width of the mixing layer is similar or slightly reduced; however, the total mass of mixed material can actually increase. The mixing layer becomes more compact and efficient. However, the normalized mixed mass decreases, meaning that finger entrainment becomes more important than in the simple two-layer case. The effect of adding the central layer appears to decrease when the Atwood number is decreased. The Flash results are also benchmarked against two-layer experimental data from a shock tube at the University of Arizona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural basis for breadth development in the HIV-1 V3-glycan targeting DH270 antibody clonal lineage

Antibody affinity maturation enables adaptive immune responses to a wide range of pathogens. In some individuals broadly neutralizing antibodies develop to recognize rapidly mutating pathogens with extensive sequence diversity. Vaccine design for pathogens such as HIV-1 and influenza has therefore focused on recapitulating the natural affinity maturation process. Here, we determine structures of antibodies in complex with HIV-1 Envelope for all observed members and ancestral states of the broadly neutralizing HIV-1 V3-glycan targeting DH270 antibody clonal B cell lineage. These structures track the development of neutralization breadth from the unmutated common ancestor and define affinity maturation at high spatial resolution. By elucidating contacts mediated by key mutations at different stages of antibody development we identified sites on the epitope-paratope interface that are the focus of affinity optimization. Thus, our results identify bottlenecks on the path to natural affinity maturation and reveal solutions for these that will inform immunogen design aimed at eliciting a broadly neutralizing immune response by vaccination.

60 APPLIED LIFE SCIENCES↗

Intricate structure of the plasma Rayleigh–Taylor instability in shock tubes

Spikes and bubbles grow on unstable interfaces that are accelerated in high-energy-density conditions. If a shock propagates ahead of the interface, the plasma can be heated to extreme conditions where conduction and radiation fluxes influence the hydrodynamics. For example, a National Ignition Facility experiment found reduced single-mode nonlinear mixed-width growth in conditions scaled from a supernova explosion. We present high-resolution two-dimensional radiation hydrodynamic simulations with the Flash code that quantitatively reproduce the experiment. Radiative fluxes are primarily responsible for ablating the spike and removing the mushroom caps. The ablated plasma increases the mixed mass and forms a low-density halo with spikes forming in both directions. This is considerably more complex than classical instability. The halo is sensitive to ablative physics, so radiographing it may aid in the verification of energy transport modeling. Although ablation changes the spike shape, it has little effect on the overall mixed width for these parameters. This is because ablation enhances the bubble velocity but it has the opposite effect on the spike. The radiation transport instead suppresses the growth via increasing the shocked foam density, thus decreasing the Atwood number. Furthermore, a terminal velocity model including the rarefaction expansion agrees with the experimental mixed-width growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of self-generated magnetic fields in the inertial fusion ignition threshold

Magnetic fields spontaneously grow at unstable interfaces around hot-spot asymmetries during inertial confinement fusion implosions. Although difficult to measure, theoretical considerations and numerical simulations predict field strengths exceeding 5 kT in current National Ignition Facility experiments. Magnetic confinement of electrons then reduces the rate of hot-spot heat loss by >5%. We demonstrate this via magnetic post-processing of two-dimensional xRAGE hydrodynamic simulation data at bang time. We then derive a model for the self-magnetization, finding that it varies with the square of the hot-spot temperature and inversely with the areal density. The self-magnetized Lawson analysis then gives a slightly reduced ignition threshold. Time-dependent hot-spot energy balance models corroborate this finding, with the magnetic field quadrupling the fusion yield for near-threshold parameters. The inclusion of magnetized multi-dimensional fluid instabilities could further alter the ignition threshold and will be the subject of future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Faster ablative Kelvin–Helmholtz instability growth in a magnetic field

Shear flows along a plasma interface will quickly grow unstable due to the Kelvin–Helmholtz instability. If there is a concurrent temperature gradient across the interface, higher modes are stabilized by the thermal diffusion. These ablative effects must be considered in, for example, jet features in inertial confinement fusion hot-spots, or plasma plumes in young supernovae. We show that magnetization of the plasma can greatly affect the instability, even if magnetic pressure is small. This is because electrons are localized by their gyromotion, reducing the heat flux and material ablation. We use a two-dimensional numerical extended-magnetohydrodynamics approach to assess this effect for dense fusion conditions. In comparison with the unmagnetized case, self-generated Biermann fields make only a minor difference to growth rates. However, simulations with a large 50 kT external field found that the growth rate of the least stable mode increased by 40%. In conclusion, this has implications for mix processes in Z-pinches and magnetized inertial confinement fusion concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence theories and statistical closure approaches

When discussing research in physics and in science more generally, it is common to ascribe equal importance to the three components of the scientific trinity: theoretical, experimental, and computational studies. This review will explore the future of modern turbulence theory by tracing its history, which began in earnest with Kolmogorov’s 1941 analysis of turbulence cascade and inertial range [A.N. Kolmogorov, Dokl. Akad. Nauk SSSR, 30, 299, (1941); 32, 19, (1941)]. The 80th Anniversary of Kolmogorov’s landmark study is a welcome opportunity to survey the achievements and evaluate the future of the theoretical approach of turbulence research. Over the years, turbulence theories have been critically important in laying the foundation of our understanding of the nature of turbulent flows. In particular, the Direct Interaction Approximation (DIA) [R.H. Kraichnan, J. Fluid Mech., 5, 497 (1959)] and its subsequent development, known as the statistical closure approach, can be identified as perhaps the most profound single advancement. The remarkable success of the statistical closure has furnished a platform to study such essential concepts as the energy transfer process and interacting scales, and the roles of the straining and sweeping motions. More recently, the quasi-Lagrangian formulation of V. L’vov & I. Procaccia and Kraichnan’s solvable passive scalar model provided powerful ways to explore another fundamental aspect of turbulent flows, the phenomena of intermittency, and the associated anomalous scaling exponents. In the meantime, the theory of fluid equilibria has been developed to describe the large-scale structures that can emerge from turbulent cascades of two-dimensional and geophysical flows at a later time. And yet, despite all these successes, analytical treatments suffer from mathematical complexities. As a result, the utility of theoretical approaches has been limited to relatively idealized flows. On the other hand, in recent decades, computational abilities and experimental facilities have reached an unprecedented scale. Looking beyond the horizon, the imminent deployment of exascale supercomputers will generate complete datasets of the entire flow field of key benchmark flows, allowing researchers to extract additional measurements concerning fully developed, complex turbulent flow fields far beyond those available from the statistical closure theories. Some other developments that could potentially influence the future course of turbulence theories include the advancement of machine learning, artificial intelligence, and data science; likely disruptions arising from the advent of quantum computation; and the increasingly prominent role of turbulence research in providing more accurate climate scientific data. Finally, turbulence theorists can leverage these developments by asking the right questions and developing advanced, sophisticated frameworks that will be able to predict and correlate vast amounts of data from the other two components of the trinity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Blue phases on patterned surfaces

Stable, macroscopic single-crystal chiral liquid crystal compositions are described. The compositions include a single-crystal chiral liquid crystal material on a patterned surface. The patterned surface seeds a particular crystallographic orientation at the substrate-liquid crystal interface. Also described are methods of forming the single-crystal chiral liquid crystal compositions.

de Pablo, Juan Jose↗

Simulation and flow physics of a shocked and reshocked high-energy-density mixing layer

This work describes a computational investigation of multimode instability growth and multimaterial mixing induced by multiple shock waves in a high-energy-density (HED) environment, where pressures exceed 1 Mbar. The simulations are based on a series of experiments performed at the National Ignition Facility (NIF) and designed as an HED analogue of non-HED shock-tube studies of the Richtmyer–Meshkov instability and turbulent mixing. A three-dimensional computational modelling framework is presented. It treats many complications absent from canonical non-HED shock-tube flows, including distinct ion and free-electron internal energies, non-ideal equations of state, radiation transport and plasma-state mass diffusivities, viscosities and thermal conductivities. The simulations are tuned to the available NIF data, and traditional statistical quantities of turbulence are analysed. Integrated measures of turbulent kinetic energy and enstrophy both increase by over an order of magnitude due to reshock. Large contributions to enstrophy production during reshock are seen from both the baroclinic source and enstrophy–dilatation terms, highlighting the significance of fluid compressibility in the HED regime. Dimensional analysis reveals that Reynolds numbers and diffusive Péclet numbers in the HED flow are similar to those in a canonical non-HED analogue, but conductive Péclet numbers are much smaller in the HED flow due to efficient thermal conduction by free electrons. It is shown that the mechanism of electron thermal conduction significantly softens local spanwise gradients of both temperature and density, which causes a minor but non-negligible decrease in enstrophy production and small-scale mixing relative to a flow without this mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rayleigh–Taylor and Richtmyer–Meshkov instabilities: A journey through scales

Hydrodynamic instabilities such as Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities usually appear in conjunction with the Kelvin–Helmholtz (KH) instability and are found in many natural phenomena and engineering applications. They frequently result in turbulent mixing, which has a major impact on the overall flow development and other effective material properties. This can either be a desired outcome, an unwelcome side effect, or just an unavoidable consequence, but must in all cases be characterized in any model. The RT instability occurs at an interface between different fluids, when the light fluid is accelerated into the heavy. The RM instability may be considered a special case of the RT instability, when the acceleration provided is impulsive in nature such as that resulting from a shock wave. Here in this pedagogical review, we provide an extensive survey of the applications and examples where such instabilities play a central role. First, fundamental aspects of the instabilities are reviewed including the underlying flow physics at different stages of development, followed by an overview of analytical models describing the linear, nonlinear and fully turbulent stages. RT and RM instabilities pose special challenges to numerical modeling, due to the requirement that the sharp interface separating the fluids be captured with fidelity. These challenges are discussed at length here, followed by a summary of the significant progress in recent years in addressing them. Examples of the pivotal roles played by the instabilities in applications are given in the context of solar prominences, ionospheric flows in space, supernovae, inertial fusion and pulsed-power experiments, pulsed detonation engines and Scramjets. Progress in our understanding of special cases of RT/RM instabilities is reviewed, including the effects of material strength, chemical reactions, magnetic fields, as well as the roles the instabilities play in ejecta formation and transport, and explosively expanding flows. The article is addressed to a broad audience, but with particular attention to graduate students and researchers who are interested in the state-of-the-art in our understanding of the instabilities and the unique issues they present in the applications in which they are prominent.

42 ENGINEERING↗