Search NASA⌕ Search

Engineering topics

Zhou, Yuanyuan

Publications and source records attributed to Zhou, Yuanyuan.

At least 19 records

Bio-inspired multiscale design for perovskite solar cells

Metal halide perovskite semiconductors have attractive light-harvesting and charge-carrier transport properties for photovoltaics. Perovskite solar cells (PSCs) and modules have demonstrated their commercial promise with high power conversion efficiencies, but still face stability challenges. In this Review, we explore how biomaterials offer design inspiration for the development of durable and efficient PSCs at three different scales. At the molecular level, bio-inspired molecular interactions are harnessed towards crystallization control and degradation prevention, which offers an enhancement in long-term maximum-power-point tracking stability. At the microstructural level, self-healing and strength-enhancing strategies, utilizing dynamic bonds and interfacial reinforcement, can help PSCs to recover from physical damage and maintain high performance. At the device level, macroscopic functionalities, such as moth-eye-inspired structures tailored to different layers, can collectively enable antireflection, radiative cooling and self-cleaning to optimize light management, heat dissipation and encapsulation in PSCs. Bio-inspired PSC research can combine improved efficiency and lifetime, with abundant, biocompatible alternatives to conventional stabilizers. Future efforts should focus on screening bioinspired molecules to optimize film crystallization and stability, developing self-healing mechanisms triggered by operational stress, designing cost-efficient biomicrostructures, and integrating multifunctional encapsulation to enhance the efficiency and lifespan of PSCs.

Duan, Tianwei↗

Chiral-structured heterointerfaces enable durable perovskite solar cells

Mechanical failure and chemical degradation of device heterointerfaces can strongly influence the long-term stability of perovskite solar cells (PSCs) under thermal cycling and damp heat conditions. Here, we report chirality-mediated interfaces based on R-/S-methylbenzyl-ammonium between the perovskite absorber and electron-transport layer to create an elastic yet strong heterointerface with increased mechanical reliability. This interface harnesses enantiomer-controlled entropy to enhance tolerance to thermal cycling–induced fatigue and material degradation, and a heterochiral arrangement of organic cations leads to closer packing of benzene rings, which enhances chemical stability and charge transfer. The encapsulated PSCs showed retentions of 92% of power-conversion efficiency under a thermal cycling test (-40°C to 85°C; 200 cycles over 1200 hours) and 92% under a damp heat test (85% relative humidity; 85°C; 600 hours).

14 SOLAR ENERGY↗

Methods for making low bandgap perovskites

The present disclosure relates to a composition that includes a perovskite having a stoichiometry comprising A1-xFAxSn1-yBy(I1-zXz)3, where A is a first cation, B is a second cation, X is a halide, and 0.5≤x≤0.9, 0.5≤y≤0.9, and 0≤z≤1. In some embodiments of the present disclosure, A may include at least one of cesium, guanidinium, and/or methylammonium. In some embodiments of the present disclosure, X may include at least one of bromide and/or chloride. In some embodiments of the present disclosure, z may be equal to zero.

Zhu, Kai↗

Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis

Ammonia (NH 3 ) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber–Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH 3 production that can be paired with renewable energy. The first verified electrochemical method for NH 3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH 3 synthesis. Here we verified the calcium-mediated process using a rigorous protocol and achieved an NH 3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip) 4 ] 2 ) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH 3 , a critical chemical precursor and promising energy vector

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential multi-probe thermal transport measurements of multi-walled carbon nanotubes grown by chemical vapor deposition

Carbon nanotubes (CNTs) are quasi-one dimensional nanostructures that display both high thermal conductivity for potential thermal management applications and intriguing low-dimensional phonon transport phenomena. In comparison to the advances made in the theoretical calculation of the lattice thermal conductivity of CNTs, thermal transport measurements of CNTs have been limited by either the poor temperature sensitivity of Raman thermometry technique or the presence of contact thermal resistance errors in sensitive two-probe resistance thermometry measurements. Here we report advances in a multi-probe measurement of the intrinsic thermal conductivity of individual multi-walled CNT samples that are transferred from the growth substrate onto the measurement device. The sample-thermometer thermal interface resistance is directly measured by this multi-probe method and used to model the temperature distribution along the contacted sample segment. The detailed temperature profile helps to eliminate the contact thermal resistance error in the obtained thermal conductivity of the suspended sample segment. A differential electro-thermal bridge measurement method is established to enhance the signal-to-noise ratio and reduce the measurement uncertainty by over 40%. The obtained thermal resistances of multiple suspended segments of the same MWCNT samples increase nearly linearly with increasing length, revealing diffusive phonon transport as a result of phonon-defect scattering in these MWCNT samples. The measured thermal conductivity increases with temperature and reaches up to 390 ± 20 W m –1 K –1 at room temperature for a 9-walled MWCNT. In conclusion, theoretical analysis of the measurement results suggests submicron phonon mean free paths due to extrinsic phonon scattering by extended defects such as grain boundaries. The obtained thermal conductivity is decreased by a factor of 3 upon electron beam damage and surface contamination of the CNT sample.

42 ENGINEERING↗

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Cesium tin-lead (Sn-Pb) perovskites are exceptional for their combined capabilities in unlocking ideal bandgaps for solar cells and mitigating the stability issue faced by their hybrid organic-inorganic counterparts. But the development of high-performance solar cells using these materials is retarded by their inherent high density of detrimental Sn(IV) defects. Herein, we demonstrate a sequential surface treatment method, which entails a Sn(II) halide treatment to displace the buried Sn(IV) ions underneath the film surface, followed by a H 2 O treatment to hydrolyze the displaced Sn(IV) ions. The surface treatment induces chemical and microstructural reconstructions that significantly improve the optoelectronic properties and stability of perovskites. As a result, a power conversion efficiency of 16.79% and a T 90 stability of 958 h are achieved, topping all previously reported performance parameters for inorganic Sn-Pb PSCs. This achievement further shortens the performance gap between all-inorganic and hybrid organic- inorganic Sn-Pb PSCs with sub-1.4 eV bandgaps.

14 SOLAR ENERGY↗

Methods for producing perovskite halide films

An aspect of the present disclosure is a method that includes exchanging at least a portion of a first cation of a perovskite solid with a second cation, where the exchanging is performed by exposing the perovskite solid to a precursor of the second cation, such that the precursor of the second cation oxidizes to form the second cation and the first cation reduces to form a precursor of the first cation.

14 SOLAR ENERGY↗

X-ray ptychographic tomography reveals buried 3D structural defects in metal halide perovskites

For the first of its kind, X-ray ptychographic imaging is utilized for probing metal halide perovskite crystals, revealing various 3D structural defects fully or partially buried underneath the perovskite surface. Here, this work demonstrates a powerful, non-intrusive 3D tomographic characterization method to illuminate the complete microstructure of perovskites for advanced energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically Resolved Electrically Active Intragrain Interfaces in Perovskite Semiconductors

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples. These intragrain interfaces include composition boundaries formed by heterogeneous ion distribution, stacking faults resulted from wrongly stacked crystal planes, and symmetrical twinning boundaries. The atomic-scale imaging of these intragrain interfaces enables us to build unequivocal models for the ab initio calculation of electronic properties. Our results suggest that these structure interfaces are generally electronically benign, whereas their dynamic interaction with point defects can still evoke detrimental effects. This work paves the way toward a more complete fundamental understanding of the microscopic structure-property-performance relationship in metal halide perovskites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Organo-metal halide perovskites films and methods of making the same

An aspect of the present disclosure is a method that includes applying a solution that includes a first solvent, a halogen-containing precursor, and a metal halide to a substrate to form a coating of the solution on the substrate, contacting the coating with a second solvent to form a first plurality of organo-metal halide perovskite crystals on the substrate, and thermally treating the first plurality of organo-metal halide perovskite crystals, such that at least a portion of the first plurality of organo-metal halide perovskite crystals is converted to a second plurality of organo-metal halide perovskite crystals on the substrate. The halogen-containing precursor and the metal halide are present in the solution at a molar ratio of the halogen-containing precursor to the metal halide between about 1.01:1.0 and about 2.0:1.0, and a property of the second plurality of organo-metal halide perovskite crystals is improved relative to a property of the first plurality of organo-metal halide perovskite crystals.

Zhu, Kai↗

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancing Chemical Stability and Suppressing Ion Migration in CH 3 NH 3 PbI 3 Perovskite Solar Cells via Direct Backbone Attachment of Polyesters on Grain Boundaries

Organic–inorganic halide perovskites feature excellent optoelectronic properties but poor chemical stability. While passivating perovskite grain boundary (GB) by polymers shows prospects on long-term performance of perovskite solar cells (PSCs), its detailed impact on the ion migration phenomenon, which largely deteriorates the PSC stability, remains less probed. In this work, we introduce a new polar polymer, polycaprolactone (PCL), to passivate GBs of methylammonium lead triiodide (MAPbI 3 ) perovskite with only 1–2 polymer monolayers via direct backbone attachment. The PSCs with passivated MAPbI 3 , using a classic but less stable Spiro-OMeTAD (2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene) hole transport layer (HTL), exhibit improved power conversion efficiencies up to 20.1%, with 90% of the initial PCE being preserved after 400 h ambient storage, and 80% even after 100 h, 85 °C aging. The improved PSC stability indicates critical roles of PCL GB passivation in retarding moisture-induced decomposition and suppressing ion migration within the perovskite. Furthermore, time-of-flight secondary ion mass spectrometry reveals that I– ions can actively migrate into the electrode, HTL, and their interface in nonpassivated PSCs, even without an externally applied electric field, while such migration is significantly mitigated in PCL-passivated PSCs. This effective GB passivation by PCL suggests an important potential of polymer additives toward the development of stable high-performance PSCs.

36 MATERIALS SCIENCE↗

Facile healing of cracks in organic–inorganic halide perovskite thin films

Organic-inorganic halide perovskite (OIHP) thin films at the heart of the burgeoning thin-film perovskite solar cells (PSCs) technology possess poor mechanical properties, which is likely to limit the long-term reliability of PSCs as they are poised for commercialization. In an effort to address this issue, in this work we demonstrate that through-thickness cracks induced by bending-tension in thin films of the two prototypical OlHPs, methylammonium lead triiodide (MAPbl(3)) and formamidinium lead triiodide (FAPbl(3)), can be healed easily. This is through the application of either a moderate compressive stress (bending-compression) at room temperature or a simple heat-treatment at modest temperatures. The crack-healing process is found to be time-dependent, which indicates that facile mass-transport in OlHPs plays a key role in this phenomenon. An explanation for this phenomenon is provided, one based on the fundamentals of brittle fracture. This discovery has broad implications for the prevention and/or restoration of the overall performance, environmental stability, and mechanical reliability of PSCs, and other devices.

36 MATERIALS SCIENCE↗

Methods for producing perovskite halide films

An aspect of the present disclosure is a method that includes exchanging at least a portion of a first cation of a perovskite solid with a second cation, where the exchanging is performed by exposing the perovskite solid to a precursor of the second cation, such that the precursor of the second cation oxidizes to form the second cation and the first cation reduces to form a precursor of the first cation.

36 MATERIALS SCIENCE↗

Stable Formamidinium-Based Perovskite Solar Cells via In Situ Grain Encapsulation

Formamidinium (FA)-based lead iodide perovskites have emerged as the most promising light-absorber materials in the prevailing perovskite solar cells (PSCs). However, they suffer from the phase-instability issue in the ambient atmosphere, which is holding back the realization of the full potential of FA-based PSCs in the context of high efficiency and stability. Herein, the tetraethylorthosilicate hydrolysis process is integrated with the solution crystallization of FA-based perovskites, forming a new film structure with individual perovskite grains encapsulated by amorphous silica layers that are in situ formed at the nanoscale. The silica not only protects perovskite grains from the degradation but also enhances the charge-carrier dynamics of perovskite films. The underlying mechanism is discussed using a joint experiment-theory approach. Through this in situ grain encapsulation method, PSCs show an efficiency close to 20% with an impressive 97% retention after 1000-h storage under ambient conditions.

14 SOLAR ENERGY↗