Engineering topics

Zhou, Yulin

Publications and source records attributed to Zhou, Yulin.

3 records

DOE OSTI2024

HL-2A's ELM cycle simulations by integrating BOUT++'s drift MHD and transport code

A new integrating model has been developed to couple tokamak edge multiscale magnetohydrodynamic (MHD) events and transport simulations, such as edge-localized mode (ELM) cycles. As a proof of principle, we first start from a set of three-field two-fluid model equations, which includes the pressure, current, and vorticity. Here, the equations are separated into the slowly evolving part of the axisymmetric component by taking a time average of the axisymmetric component. The time-averaged fluxes, which are quadratic in fluctuating quantities, act as driven terms for the time-averaged axisymmetric quantities that determine the plasma transport, and therefore the large-scale evolution of the plasma profiles. Then the HL-2A's ELM cycles are simulated using the model. Good agreements of ELM size and pedestal recovery time have been achieved for the solutions obtained from the coupled simulation compared with experiment. For one ELM cycle simulation, the coupled code can achieve a speedup of a factor of up to 30 over standalone code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

One-dimensional simulation and validation of divertor detachment induced through nitrogen seeding on HL-2A

Divertor detachment is a promising method to solve the power exhaust problem in tokamak devices or even in future magnetic fusion reactors. In this work, a detachment experiment (HL-2A shot #38008) with mixed gas seeding (60% nitrogen and 40% deuterium) is simulated using the SD1D module in BOUT++. In the process from attachment to detachment, the target electron temperature and the target ion saturation current in simulations are found to be consistent with the experimental results measured by Langmuir probes on the target plate. In order to understand the underlying detachment mechanism on HL-2A, this work analyses the role of different particle species in the cases with different seeding rates. It shows that the plasma density varies little and the density of neutrals (D and D 2 ) slightly decreases with the increase of nitrogen seeding rate, such that plasma–neutral interactions cannot effectively reduce plasma energy and plasma momentum in the divertor. The case with a high seeding rate predicts that increasing seeding rate cannot reach a target temperature lower than 2.5 eV, which is the required temperature for strong plasma–molecule interactions. Thus, the plasma–molecule interactions may not be important in the divertor during nitrogen seeding. Here this work also studies the parallel forces including (1) force due to the parallel electric field, (2) friction forces, (3) ion- and electron-thermal forces, and (4) collisional reactions (e.g. charge exchange recombination and ionisation). It is found that the friction force between nitrogen ions and other particle species (primarily D + ) is the dominant force towards the target, while ion- and electron-thermal forces are the dominant force pushing nitrogen ions back to upstream. Parallel forces determine the parallel distribution of nitrogen impurities, and therefore decide the region of nitrogen radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Investigation of the role of hydrogen molecules in 1D simulation of divertor detachment

The role of neutral and charged hydrogenic molecules in detached regimes of tokamak plasmas is investigated using a simplified 1D numerical model. Using MAST Upgrade like conditions, simulations are implemented to study the rollover of target flux Γ in upstream density scan. It is found that if H 2 and H 2 + are considered in simulations a lower target temperature and a larger upstream density will be required to trigger divertor detachment under the same input power and particle flux, and the critical detachment threshold (the critical ratio of upstream static pressure to the power entering the recycling region) is found to be $^{ρ_{up}}_{ρ_{recl}}$ ~ 8.1 NMW -1 at rollover. Molecule–plasma interactions are found to be as crucial as atom–plasma interactions during divertor detachment, both of which account for the majority of plasma momentum loss in the cases studied here. Further analysis of the momentum loss decomposition shows molecule-plasma elastic collisions dominate molecule-plasma interactions, while molecular charge exchange cannot effectively reduce plasma momentum. In terms of H alpha emission, a strong rise of H alpha signal is found to be due to molecular excitation channels when the upstream density further increases after rollover.

SD1D↗