Search NASA⌕ Search

Engineering topics

Zhou, Zhiyong

Publications and source records attributed to Zhou, Zhiyong.

Enhanced Curie temperature and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 lead-free ceramics after the addition of LiTaO3

Highlights: • The Curie temperature and piezoelectric properties of BCZT ceramics can be obviously enhanced by the addition of LiTaO{sub 3}. • The Curie temperature of (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} ceramics improved from 93 ℃ to 102 ℃. • (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} ceramic with x = 0.3 mol.% LiTaO{sub 3} demonstrates optimal piezoelectric properties. • The giant electrostrictive coefficients (Q{sub 33} ≈ 0.040-0.050 m{sup 4}/C{sup 2}) were also obtained in LT-doped BCZT ceramics. - Abstract: Polycrystalline (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3}–xLiTaO{sub 3} ceramics were designed and synthesized using a solid-state reaction to improve both the Curie temperature and the electrical properties of (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} lead-free piezoelectric ceramics. The effect that the addition of LiTaO{sub 3} has on the structure and electrical properties of BCZT ceramics was studied systemically. The results show that the Curie temperature and the piezoelectric properties of BCZT can be substantially enhanced by adding LiTaO{sub 3.} The Curie temperature increased from 93 °C to 102 °C after adding LT of 0.3 mol.%. X-ray diffraction and Raman spectral analysis of the ceramics reveal the coexistence of orthorhombic (O) and tetragonal (T) phases. This coexistence of O and T phases at room temperature helps improve the ferroelectric and piezoelectric properties. The ceramic with x = 0.3 mol.% exhibits the highest values for d{sub 33} = 433 pC/N, d{sub 33}{sup *} = 858 pm/V (at 1 kV/mm) and k{sub p} = 44.6%. Furthermore, giant electrostrictive coefficients (Q{sub 33} ≈ 0.040–0.050 m{sup 4}/C{sup 2}) were also obtained for these LT-doped BCZT ceramics. These properties confirm that BCZT-xLT is a promising candidate system for lead-free piezoelectric ceramic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High energy storage properties of (Ni1/3Nb2/3)4+ complex-ion modified (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 ceramics

Highlights: • BCZT-xNN ceramics showed single phase perovskite structure without an obvious second phase after adding NN, and exhibited both good temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz) stability. • The highest energy storage density can reach 0.66 J/cm{sup 3} and the energy efficiency is 88.1% was achieved in x = 0.3. • The environmental friendly (lead-free) BCZT-xNN ceramics are good candidate for application in energy storage devices. • This paper also developes a new method to obtain high energy storage density and efficiency of ceramic capacitor, which aims to adjust the T{sub c} of ceramics far below room temperature. - Abstract: In this study, paraelectric ceramics, (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90}){sub 1-x}(Ni{sub 1/3}Nb{sub 2/3}){sub x}O{sub 3,} abbreviated as BCZT-xNN (with x = 0.1, 0.2, 0.3, 0.4) were prepared via a solid-state reaction method. By introducing a B-site complex-ion, (Ni{sub 1/3}Nb{sub 2/3}){sup 4+}, the Curie temperature of the ceramic could be reduced to below room temperature. The effects of this B-site (Ni{sub 1/3}Nb{sub 2/3}){sup 4+} complex-ion substitution on the phase structure, surface microstructure as well as the dielectric, ferroelectric, and energy storage properties of the ceramic were systematically investigated. After adding NN, BCZT-xNN shows a single phase perovskite structure without evidence of a second phase . In addition, we observed high stability with respect to both temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz). Doping with NN produces slim polarization-electric field hysteresis loops and enhanced energy storage properties, while the efficiency decreases. When x = 0.3, the highest energy storage density reached 0.66 J/cm{sup 3} for a high electric field (20 kV/mm), and the respective energy efficiency was 88.1%. These properties indicate that the environmental friendly BCZT-xNN ceramics are promising candidates for commercial energy storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of tungsten doping in bismuth-layered Na{sub 0.5}Bi{sub 2.5}Nb{sub 2}O{sub 9} high temperature piezoceramics

The effects of W{sup 6+} doping for B site on the structural and electrical properties of Na{sub 0.5}Bi{sub 2.5}Nb{sub 2}O{sub 9}-based ceramics were studied. It shows a trend of preferable orientation growth along c-axis and the Curie point (T{sub c}) decreases slightly from 792 to 761 °C with the increasing W{sup 6+} amount. The electrical resistivity of Na{sub 0.5}Bi{sub 2.5}Nb{sub 2}O{sub 9}-based ceramics increases as much as about two orders of magnitude and the piezoelectric constant d{sub 33} is significantly improved from 10.5 to 21.8 pC/N by W{sup 6+} modification. The composition of Na{sub 0.5}Bi{sub 2.5}Nb{sub 1.99}W{sub 0.01}O{sub 9} with a high T{sub c} (792 °C), very good temperature stability up to ∼0.96T{sub c}, a large d{sub 33} of 17.9 pC/N and sufficient high resistivity, is an excellent candidate for high temperature piezoelectric applications.

36 MATERIALS SCIENCE↗

Exploring structural variability in X-ray crystallographic models using protein local optimization by torsion-angle sampling

Torsion-angle sampling, as implemented in the Protein Local Optimization Program (PLOP), is used to generate multiple structurally variable single-conformer models which are in good agreement with X-ray data. An ensemble-refinement approach to differentiate between positional uncertainty and conformational heterogeneity is proposed. Modeling structural variability is critical for understanding protein function and for modeling reliable targets for in silico docking experiments. Because of the time-intensive nature of manual X-ray crystallographic refinement, automated refinement methods that thoroughly explore conformational space are essential for the systematic construction of structurally variable models. Using five proteins spanning resolutions of 1.0–2.8 Å, it is demonstrated how torsion-angle sampling of backbone and side-chain libraries with filtering against both the chemical energy, using a modern effective potential, and the electron density, coupled with minimization of a reciprocal-space X-ray target function, can generate multiple structurally variable models which fit the X-ray data well. Torsion-angle sampling as implemented in the Protein Local Optimization Program (PLOP) has been used in this work. Models with the lowest R{sub free} values are obtained when electrostatic and implicit solvation terms are included in the effective potential. HIV-1 protease, calmodulin and SUMO-conjugating enzyme illustrate how variability in the ensemble of structures captures structural variability that is observed across multiple crystal structures and is linked to functional flexibility at hinge regions and binding interfaces. An ensemble-refinement procedure is proposed to differentiate between variability that is a consequence of physical conformational heterogeneity and that which reflects uncertainty in the atomic coordinates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗