Search NASA⌕ Search

Engineering topics

Zhu, Rong

Publications and source records attributed to Zhu, Rong.

Ionic liquid carbon nanotube composites for wireless chemical sensing

A wireless sensor platform design and a single walled carbon nanotube/ionic liquid-based chemidosimeter system can incorporated into a highly sensitive and selective chemical hazard badge that can dosimetrically detect an analyte down to a sub parts-per-million concentration.

Swager, Timothy M.↗

Wireless oxygen dosimeter

A tag for detecting an analyte can include a radio frequency identification tag including a sensor portion, the sensor portion configured to change resistivity when the radio frequency identification tag contacts or interacts with an analyte, whereby the resistivity change alters an output of the radio frequency identification tag, wherein the sensor portion includes a circuit, and wherein the sensor portion is configured to activate the circuit or deactivate the circuit when contacted or having interacted with the analyte, wherein the sensor portion includes a conductive material associated with a polymer complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autonomously Responsive Membranes for Chemical Warfare Protection

Stimuli-responsive materials offer new opportunities to resolve long-standing material challenges and are rapidly gaining pivotal roles in diverse applications. For example, smart protective garments that rapidly transport water vapor and autonomously block chemical threats are expected to enable an effective new paradigm of adaptive personal protection. However, the incorporation of these seemingly incompatible properties into a single responsive system remains elusive. Herein, a bistable membrane that can rapidly, selectively, and reversibly transition from a highly breathable state in a safe environment to a chemically protective state when exposed to organophosphate threats such as sarin is demonstrated. Dynamic response to chemical stimuli is achieved through the physical collapse of an ultrathin copolymer layer on the membrane surface, which efficiently gates transport through membrane pores composed of single-walled carbon nanotubes (SWNTs). The adoption of nanometer-wide SWNTs for ultrafast moisture conduction enables a simultaneous boost in size-sieving selectivity and water-vapor permeability by decreasing nanotube diameter, thereby overcoming the breathability/protection trade-off that limits conventional membrane materials. Adaptive multifunctional membranes based on this platform greatly extend the active use of a protective garment and present exciting opportunities in many other areas including separation processes, sensing, and smart delivery.

36 MATERIALS SCIENCE↗

Influence of the Carrier Gas Species on CaO-Gas Mixed Injection in the EAF Steelmaking Process

In the process of electric arc furnace (EAF) steelmaking, usually the lime powder is sprayed into the molten pool with air as carrier gas to reduce costs. However, because of the nitrogen content requirements in the steel, oxygen or oxygen to mix carbon dioxide was substituted as the carrier gas for the lime powder injection. Lime injection with a burner mode has been reported to promote 100 pct lime injection in the EAF and faster dissolution of lime, but few studies have been made on the effect of the carrier gas on lime powder injection. In this study, four different kinds of carrier gas were used to investigate the influence of carrier gas on lime powder injection in EAF steelmaking. In this study, a CFD model based on the discrete particle model and eddy-dissipation concept model was carried out to investigate the influence of carrier gas species on the CaO-gas mixed injection in EAF steelmaking. The interaction between carrier gas and particles was analyzed, and the influences of carrier gas on the shrouding CH{sub 4} were also analyzed. Results show that the decrease of CO{sub 2} content in the main carrier gas provides better efficiency of the shrouding combustion and more uniform particle distribution.

36 MATERIALS SCIENCE↗

Characteristics of Flow Field for Supersonic Oxygen Multijets with Various Laval Nozzle Structures

The Laval nozzle is used widely in steelmaking processes to increase the velocity of an oxygen jet up to approximately 2 Mach numbers. The present research is aimed at determining the effect of the Laval nozzle structure on a supersonic oxygen jet flow field. Both one-dimensional isoentropic flow theory and a characteristic-line method were used to design five-hole oxygen lances of two types and, applicable to oxygen multijets, to analyze their flow field characteristics by a series of numerical simulations and experimental studies. When compared to the conventional oxygen lance designed according to the one-dimensional isoentropic flow theory, the new oxygen lance designed with employment of the characteristic-line method is more effective in both suppressing the shock wave generation and improving the initial axial velocity of oxygen jets under the same test conditions. As a result, a larger impaction cavity was generated by the new oxygen lance and the mass transfer within oxygen, liquid slag, and molten steel was enhanced.

36 MATERIALS SCIENCE↗

Effect of Rolling Temperature on the Microstructure and Mechanical Properties of AZ31 Alloy Sheet Processed through Variable-Plane Rolling

AZ31 magnesium alloy sheet was produced through variable-plane rolling (VPRing) under different temperatures, and a conventional rolled AZ31 alloy was investigated for comparison. A basal texture was formed during these two processes. The texture intensity was closely related to dynamic recrystallization and deformation mechanism. Four types of twins appeared, namely {10-12} extension twins, {10-13} and {10-11} contraction twins and {10-11}-{10-12} double twins. High rolling temperature and rolling plane alteration were beneficial for activating {10-11}-{10-12} double twins. The tensile strengths revealed a declining trend with elevated rolling temperatures. The AZ31 alloy rolled at 573 K showed advantageous combination with a high yield strength of 286 MPa and compromised elongation of 5%. The mechanical anisotropy of VPRed AZ31 sheet decreased with nearly similar yield strengths along the roll direction (RD), transverse direction and 45° away from the RD. The VPRing process improved the rollability and strength of Mg alloy and reduced its mechanical anisotropy.

36 MATERIALS SCIENCE↗

Study on the Impact Characteristics of Submerged CO{sub 2} and O{sub 2} Mixed Injection (S-COMI) in EAF Steelmaking

A new type of oxygen-supplying technology was developed for electric arc furnace (EAF) steelmaking using submerged CO{sub 2} and O{sub 2} mixed injection (S-COMI). S-COMI injects O{sub 2} into the molten steel bath directly by a submerged injector installed in the furnace bed; so the metallurgical reactions can be accelerated with a high utilization ratio of oxygen. However, there has been limited research on the impact characteristics of the S-COMI submerged gas jet in EAF steelmaking. In this study, water model experiments and numerical simulations were carried out to analyze the submerged gas jet behavior, and a theoretical model was built to depict the axis trajectory of submerged gas jet in the liquid bath. The numerical results were validated against the water model experiments to show that the gas flow rate and the installed angle have a significant influence on the jet impact characteristics. The results show that as the gas flow rate increases, the horizontal and vertical penetration distances increase; as the installed angle increases, the horizontal penetration distance increases while the vertical penetration distance decreases. In addition, the erosion mechanism of the element around the submerged injector exit was studied. As the installed angle increases, the velocity component in the vertical direction increases, the fluid flow is accelerated, and the wall shear stress of the underpart of the injector element increases. Therefore, the erosion rate of the upper part of the element decreases, while that of the underpart increases.

36 MATERIALS SCIENCE↗

Influence of Rolling Temperature on the Mechanical Properties and Microstructure of Variable-Plane-Rolled Mg-3Al-1Zn Alloy

AZ31 magnesium alloy was produced via variable-plane rolling (VPR) under different temperatures. The effects of rolling temperature on the microstructure, texture and mechanical properties were investigated. A double-peak basal texture was formed during VPR treatment. Dynamic recrystallization (DRX) was observed during the VPR treatment, and it can reduce the texture intensity owing to the coalescence of sub-grains. Four types of twins were observed in the VPR treatment: {10-12} extension twins, {10-13}, {10-11} contraction twins and {10-11}-{10-12} double twins. The suitable temperature of AZ31 magnesium alloy for VPR treatment is determined as 623 K through experiments with tensile yield strength of 240 MPa, compressive yield strength of 162 MPa and elongation of 13%. Owing to the important impact of temperature on mechanical properties, the alloy was further VPRed with a decrease in temperature pass-by-pass. The high temperature of 623 K at the initial passes randomized the texture, which led to notably high ductility.

36 MATERIALS SCIENCE↗

Fluid–Solid Coupling Simulation on the Temperature Distribution of Tuyere Used for Oxygen Bottom Blowing Converter

For an oxygen bottom blowing converter, a high-temperature fire spot zone forms above the tuyere owing to oxygen reaction. The bottom blowing tuyere and surrounding brick are simultaneously heated by high-temperature fire spot and flowing molten steel. High-speed fluids flowing in the inner tube and the annular gap of the tuyere can remove part of the heat transferred from the fire spot zone and molten steel, playing a vital role in cooling the tuyere. To determine the temperature distributions of the tuyere and surrounding brick under the condition of oxygen bottom blowing, a fluid–solid coupling heat transfer numerical model that considers both the radiation of the fire spot and convection of the molten steel was established in this study. The simulation results agree well with previous experimental results; thus, the numerical model was validated. Utilizing the validated model, the influences of the tuyere inner tube material and fire spot zone temperature on the tuyere temperature distribution were studied in detail. Along with an increase in the material thermal conductivity, the maximum temperature of the inner tube at the hot face decreased, verifying the superiority of copper as the inner tube. More importantly, it was found that reducing the fire spot zone temperature by mixing CO{sub 2} in the bottom blowing oxygen fundamentally alleviated the burning loss of the tuyere and the surrounding brick.

36 MATERIALS SCIENCE↗

Research on Selective Oxidation of Carbon and Aluminum with Introduction of CO{sub 2} in RH Refining of Low-Carbon Steel Process

The injection of CO{sub 2} during the Rheinstahl–Heraeus (RH) refining process as a lifting gas is a new attempt for the steel industry, and can promote refining effect and realize the utilization of CO{sub 2} as a resource. In the present study, the thermodynamic equilibrium of the RH refining process through CO{sub 2} injection instead of Ar was calculated using FactSage software. A selective oxidation sequence of [C] and [Al] with CO{sub 2} was studied and analyzed under the RH refining temperature and vacuum degree. In addition, the oxidation zones of carbon and aluminum were both defined. Industrial trials were preliminarily conducted to verify the above theory. The results show that CO{sub 2} has the potential to be used to refine low-carbon steel in RH, but its refining effect is affected by the [Al] content in steel. By reducing the additive amount of aluminum alloy in the ladle furnace and replenishing the aluminum during the late stage of the RH refining process, CO{sub 2} injection can achieve a lower temperature drop of molten steel and a better refining effect than Ar during the RH degassing process.

36 MATERIALS SCIENCE↗

Numerical Simulation and Industrial Experimental Research on the Coherent Jet with “CH{sub 4} + N{sub 2}” Mixed Fuel Gas

Coherent jet technology is widely used in the electric arc furnace (EAF) steelmaking process to deliver more energy and momentum into the molten steel bath. Meanwhile, the characteristics of a coherent jet using pure CH{sub 4} as the fuel gas have been well investigated in previous studies. To reduce the consumption of CH{sub 4}, coherent jet technology using “CH{sub 4} + N{sub 2}” mixed fuel gas instead of pure CH{sub 4} was proposed and studied in detail by numerical simulation in the present work. The Eddy Dissipation Concept model, which has detailed chemical kinetic mechanisms, was adopted to model the fuel gas combustion reactions. Experimental measurements were carried out to validate the accuracy of the computational model. The present study shows that the jet characteristics of the main oxygen improve along with the increase of the CH{sub 4} ratio in fuel gas and with the increase of the flow rate of fuel gas. When the CH{sub 4} ratio in the fuel gas is 25 pct, the fuel gas flow rate only has a limited influence on the jet characteristics, unlike the rest of the fuel gas compositions, because a high N{sub 2} proportion deteriorates the combustion performance and leads to severe incomplete combustion. Moreover, a false potential core phenomenon was observed and explained in the present study. Based on the average values, the jet length of a coherent jet with 75 pct CH{sub 4} can achieve 89.8 pct of that with 100 pct CH{sub 4}. Finally, an industrial experiment was carried out on a commercial 100t EAF using coherent jet with 75 pct CH{sub 4}, showing that the average CH{sub 4} consumption was reduced from 3.84 to 3.05 Nm{sup 3} t{sup −1} under the premise of no obvious changes in the other production indexes.

42 ENGINEERING↗

Effect of Shrouding Gas Temperature on Characteristics of a Supersonic Jet Flow Field with a Shrouding Laval Nozzle Structure

Coherent jet technology was been widely used in the electric arc furnace steelmaking process to protect the kinetic energy of supersonic oxygen jets and achieve a better mixing effect. For this technology, the total temperature distribution of the shrouding jet has a great impact on the velocity of the main oxygen jet. In this article, a supersonic shrouding nozzle using a preheating shrouding jet is proposed to increase the shrouding jet velocity. Both numerical simulation and experimental studies were carried out to analyze its effect on the axial velocity, total temperature and turbulence kinetic energy profiles of the main oxygen jet. Based on these results, it was found that a significant amount of kinetic energy was removed from the main oxygen jet when it passed though the shock wave using a high-temperature shrouding jet, which made the average axial velocity of the coherent jet lower than for a conventional jet in the potential core region. However, the supersonic shrouding nozzle and preheating technology employed for this nozzle design significantly improved the shrouding gas velocity, forming a low-density gas zone at the exit of the main oxygen jet and prolonging the velocity potential core length.

36 MATERIALS SCIENCE↗

Study on the Fluid Flow Characteristics of Coherent Jets with CO{sub 2} and O{sub 2} Mixed Injection in Electric Arc Furnace Steelmaking Processes

As an efficient oxygen supplying technology, coherent jets are widely applied in electric arc furnace (EAF) steelmaking processes to strengthen chemical energy input, speed up smelting rhythm, and promote the uniformity of molten bath temperature and compositions. Recently, the coherent jet with CO{sub 2} and O{sub 2} mixed injection (COMI) was proposed and demonstrated great application potentiality in reducing the dust production in EAF steelmaking. In the present study, based on the eddy dissipation concept model, a computational fluid dynamics model of coherent jets with COMI was built with the overall and detailed chemical kinetic mechanisms (GRI-Mech 3.0). Compared with one-step combustion reaction, GRI-Mech 3.0 consists of 325 elementary reactions with 53 components and can predict more accurate results. The numerical simulation results were validated by the combustion experiment data. The jet behavior and the fluid flow characteristics of coherent jets with COMI under 298 K and 1700 K (25 °C and 1427 °C) were studied and the results showed that for coherent jets with COMI, the chemical effect of CO{sub 2} significantly weakened the shrouding combustion reactions of CH{sub 4} and the relative importance of the chemical effect of CO{sub 2} increases with CO{sub 2} concentration increasing. The potential core length of coherent jet decreases with the volume fraction of CO{sub 2} increasing. Moreover, it also can be found that the potential core length of coherent jets was prolonged with higher ambient temperature.

36 MATERIALS SCIENCE↗

Study on the Impact Characteristics of Coherent Supersonic Jet and Conventional Supersonic Jet in EAF Steelmaking Process

Supersonic oxygen-supplying technologies, including the coherent supersonic jet and the conventional supersonic jet, are now widely applied in electric arc furnace steelmaking processes to increase the bath stirring, reaction rates, and energy efficiency. However, there has been limited research on the impact characteristics of the two supersonic jets. In the present study, by integrating theoretical modeling and numerical simulations, a hybrid model was developed and modified to calculate the penetration depth and impact zone volume of the coherent and conventional supersonic jets. The computational fluid dynamics results were validated against water model experiments. The results show that the lance height has significant influence on the jet penetration depth and jet impact zone volume. The penetration depth decreases with increasing lance height, whereas the jet impact zone volume initially increases and then decreases with increasing lance height. In addition, the penetration depth and impact zone volume of the coherent supersonic jet are larger than those of the conventional supersonic jet at the same lance height, which illustrates the advantages of the coherent supersonic jet in delivering great amounts of oxygen to liquid melt with a better stirring effect compared to the conventional supersonic jet. A newly defined parameter, the k value, reflects the velocity attenuation and the potential core length of the main supersonic jet. Finally, a hybrid model and its modifications can well predict the penetration depth and impact zone volume of the coherent and conventional supersonic jets.

36 MATERIALS SCIENCE↗

An upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells with suppressive function through interleukin 2 pathway in pulmonary arterial hypertension

Accumulating evidence suggests that abnormal inflammation plays a critical role in the pathogenesis of pulmonary arterial hypertension (PAH). CD8{sup +}CD25{sup +}Foxp3{sup +} T cell is a novel cell subtype, and its role in PAH is not yet investigated. Here, we observed that PAH patients presented a significant upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells and a downregulation of CD4{sup +}CD25{sup +}Foxp3{sup +} T cells compared to healthy controls. Regardless, the total number of CD25{sup +}Foxp3{sup +} T cells in PAH patients was still smaller than that in healthy controls. Compared to CD8{sup +}CD25{sup -} T cells, CD8{sup +}CD25{sup +} T cells presented higher Foxp3 expression, lower interferon (IFN)-γ expression and higher transforming growth factor (TGF)-β expression, in both healthy and PAH individuals. The CD8{sup +}CD25{sup +} T cells in PAH patients also demonstrated regulatory function by suppressing the proliferation of CD4{sup +}CD25{sup -} and CD8{sup +}CD25{sup -} effector T cells, albeit at lower efficiency than CD4{sup +}CD25{sup +} T cells from PAH patients and healthy volunteers. CD8{sup +}CD25{sup +} T cells from PAH responded to interleukin (IL)−2 supplement by expansion and upregulating Foxp3 expression. In PAH patients, IL-2-treated CD8{sup +}CD25{sup +} T cells were more potent at inhibiting CD4{sup +}CD25{sup -} effector T cell proliferation than IL-2-untreated CD8{sup +}CD25{sup +} T cells. Together, we found an upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells in PAH patients, and this T cell population presented suppressive activity that could be enhanced by IL-2 treatment.

60 APPLIED LIFE SCIENCES↗

Genetic characterization of an adapted pandemic 2009 H1N1 influenza virus that reveals improved replication rates in human lung epithelial cells

The 2009 influenza pandemic originated from a swine-origin H1N1 virus, which, although less pathogenic than anticipated, may acquire additional virulence-associated mutations in the future. To estimate the potential risk, we sequentially passaged the isolate A/Hamburg/04/2009 in A549 human lung epithelial cells. After passage 6, we observed a 100-fold increased replication rate. High-throughput sequencing of viral gene segments identified five dominant mutations, whose contribution to the enhanced growth was analyzed by reverse genetics. The increased replication rate was pinpointed to two mutations within the hemagglutinin (HA) gene segment (HA{sub 1} D130E, HA{sub 2} I91L), near the receptor binding site and the stem domain. The adapted virus also replicated more efficiently in mice in vivo. Enhanced replication rate correlated with increased fusion pH of the HA protein and a decrease in receptor affinity. Our data might be relevant for surveillance of pre-pandemic strains and development of high titer cell culture strains for vaccine production. - Highlights: • We observed a spontaneous mutation of a 2009-pandemic H1N1 influenza virus in vitro. • The adaptation led to a 100-fold rise in replication rate in human A549 cells. • Adaptation was caused by two mutations in the HA gene segment. • Adaptation correlates with increased fusion pH and decreased receptor affinity.

60 APPLIED LIFE SCIENCES↗

Ethyl pyruvate inhibits proliferation and induces apoptosis of hepatocellular carcinoma via regulation of the HMGB1–RAGE and AKT pathways

Highlights: • Ethyl pyruvate inhibits liver cancer. • Promotes apoptosis. • Decreased the expression of HMGB1, p-Akt. - Abstract: Ethyl pyruvate (EP) was recently identified as a stable lipophilic derivative of pyruvic acid with significant antineoplastic activities. The high mobility group box-B1 (HMGB1)–receptor for advanced glycation end-products (RAGE) and the protein kinase B (Akt) pathways play a crucial role in tumorigenesis and development of many malignant tumors. We tried to observe the effects of ethyl pyruvate on liver cancer growth and explored its effects in hepatocellular carcinoma model. In this study, three hepatocellular carcinoma cell lines were treated with ethyl pyruvate. An MTT colorimetric assay was used to assess the effects of EP on cell proliferation. Flow cytometry and TUNEL assays were used to analyze apoptosis. Real-time PCR, Western blotting and immunofluorescence demonstrated ethyl pyruvate reduced the HMGB1–RAGE and AKT pathways. The results of hepatoma orthotopic tumor model verified the antitumor effects of ethyl pyruvate in vivo. EP could induce apoptosis and slow the growth of liver cancer. Moreover, EP decreased the expression of HMGB1, RAGE, p-AKT and matrix metallopeptidase-9 (MMP9) and increased the Bax/Bcl-2 ratio. In conclusion, this study demonstrates that ethyl pyruvate induces apoptosis and cell-cycle arrest in G phase in hepatocellular carcinoma cells, plays a critical role in the treatment of cancer.

60 APPLIED LIFE SCIENCES↗