Search NASA⌕ Search

Engineering topics

Zhu, Yaguang

Publications and source records attributed to Zhu, Yaguang.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Impact of Asymmetric Microstructure on Ion Transport in Ti 3 C 2 T x Membranes

Consolidation or densification of low-dimensional MXene materials into membranes can result in the formation of asymmetric membrane structures. Nanostructural (short-range) and microstructural (long-range) heterogeneity can influence mass transport and separation mechanisms. Short-range structural dynamics include the presence of water confined between the 2D layers, while long-range structural properties include the formation of defects, micropores, and mesopores. Herein, it is demonstrated that structural heterogeneity in Ti 3 C 2 T x membranes fabricated via vacuum-assisted filtration significantly affects ion transport. Higher ion permeabilities are achieved when the dense “bottom” side of the membrane, rather than the porous “top” side, faces the feed solution. Characterization of the membrane reveals distinct differences in flake alignment, surface roughness, and porosity across the membrane. In conclusion, the directional dependence on permeability suggests that one region of the membrane experiences stronger internal concentration polarization, potentially suppressing permeability through the porous side of the membrane.

MXene↗
DOE OSTI2024

Enhancing Stability of Surface Au under Oxidizing Conditions through Reduced Bulk Au Content

Contrary to the common assumption that a higher bulk content of precious metals facilitates the preservation of more surface noble metal by serving as a reservoir for surface enrichment, we demonstrate that a lower bulk content of Au results in a more stable arrangement of Au atoms at the surface of Cu–Au nanoparticles when exposed to an O 2 atmosphere. Using ambient pressure X-ray photoelectron spectroscopy, we investigate the surface segregation and oxidation behavior of Cu–Au nanoparticles across various compositions. Here, our results reveal that in Au-rich nanoparticles exposed to an H 2 atmosphere, surface segregation prompts the formation of a continuous Au-enriched shell, which subsequently oxidizes into a complete CuO x shell upon transitioning to an O 2 atmosphere. Conversely, in Au-poor nanoparticles during H 2 treatment, segregation results in the emergence of Au clusters embedded within the surface layer, persisting upon exposure to O 2 . This unexpected phenomenon shows that reducing the bulk content of precious metals can enhance the surface stability of noble atoms under oxidizing conditions, as further demonstrated by comparing the catalytic performance of Cu–Au nanoparticles with varying Au bulk contents in CO oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In Situ Monitoring the Nucleation and Growth of Nanoscale CaCO 3 at the Oil–Water Interface

Interfaces can actively control the nucleation kinetics, orientations, and polymorphs of calcium carbonate (CaCO 3 ). Prior studies have revealed that CaCO 3 formation can be affected by the interplay between chemical functional moieties on solid–liquid or air–liquid interfaces as well as CaCO 3 ’s precursors and facets. Yet little is known about the roles of a liquid–liquid interface, specifically an oil–liquid interface, in directing CaCO 3 mineralization which are common in natural and engineered systems. Here, in this study, by using in situ X-ray scattering techniques to locate a meniscus formed between water and a representative oil, isooctane, we successfully monitored CaCO 3 formation at the pliable isooctane–water interface and systematically investigated the pivotal roles of the interface in the formation of CaCO 3 (i.e., particle size, its spatial distribution with respect to the interface, and its mineral phase). Different from bulk solution, ∼5 nm CaCO 3 nanoparticles form at the isooctane–water interface. They stably exist for a long time (36 h), which can result from interface-stabilized dehydrated prenucleation clusters of CaCO 3 . There is a clear tendency for enhanced amounts and faster crystallization of CaCO 3 at locations closer to isooctane, which is attributed to a higher pH and an easier dehydration environment created by the interface and oil. Our study provides insights into CaCO 3 nucleation at an oil–water interface, which can deepen our understanding of pliable interfaces interacting with CaCO 3 and benefit mineral scaling control during energy-related subsurface operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Roles of Oil–Water Interfaces in Forming Ultrasmall CaSO 4 Nanoparticles

In natural and engineered environmental systems, calcium sulfate (CaSO 4 ) nucleation commonly occurs at dynamic liquid–liquid interfaces. Although CaSO 4 is one of the most common minerals in oil spills and oil–water separation, the mechanisms driving its nucleation at these liquid–liquid interfaces remain poorly understood. Here, in this study, using in situ small-angle X-ray scattering (SAXS), we examined CaSO 4 nucleation at oil–water interfaces and found that within 60 minutes of reaction, short rod-shaped nanoparticles (with a radius of gyration (R g ) of 17.2 ± 2.7 nm and a length of 38.2 ± 5.8 nm) had formed preferentially at the interfaces. Wide-angle X-ray scattering (WAXS) analysis identified these nanoparticles as gypsum (CaSO 4 ·2H 2 O). In addition, spherial nanoparticles measuring 4.1 nm in diameter were observed at oil–water interfaces, where surface-enhanced Raman spectroscopy (SERS) revealed an elevated pH compared to the bulk solution. The negatively charged oil–water interfaces preferentially adsorb calcium ions, collectively promoting CaSO 4 formation there. CaSO 4 particle formation at the oil–water interface follows a nonclassical nucleation (N-CNT) pathway by forming ultrasmall amorphous spherical particles which then aggregate to form intermediate nanoparticles, subsequently growing into nanorod-shaped gypsum. These findings of this study provide insights into mineral scaling during membrane separation and can inform more efficient oil transport in energy recovery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Strong Metal–Support Interactions via Synergistic Alloying

The encapsulation phenomenon associated with strong metal-support interaction (SMSI) has been largely restricted to catalyst systems consisting of group VIII metals with high surface energy and reducible transition metal oxide supports with low surface energy. Here, we demonstrate an encapsulation phenomenon that, while sharing morphological similarities with conventional SMSI, follows a distinctive pathway. This is shown by the encapsulation of CuAu nanoparticles (NPs) supported on highly ordered pyrolytic graphite (HOPG). Through dynamic monitoring of Cu, Au, and Cu 50 Au 50 NPs in an oxidizing atmosphere using ambient-pressure X-ray photoelectron spectroscopy, we show that this spontaneous encapsulation is achieved through the synergistic effect of the alloying elements. Specifically, the surface segregation of Cu promotes dissociative O 2 adsorption, leading to the formation of atomic O species, while the subsurface enrichment of Au hinders O incorporation into the bulk of CuAu NPs. Consequently, O spillover onto the graphite support occurs, resulting in the oxidation of the HOPG surface into graphitic oxide species. The higher affinity of the graphitic oxide species toward the Cu-segregated surface prompts their migration from the HOPG support to encapsulate the CuAu NPs. Finally, these results transcend the conventional SMSI and bear practical implications for the design and development of heterogeneous catalysts, particularly in carbon-supported alloy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of the Chemical States of Copper on Methanol Decomposition and Oxidation

Here, the decomposition and oxidation reactions of CH 3 OH over metallic Cu(100) and Cu 2 O-covered Cu(100) surfaces are studied using a combination of in-situ ambient-pressure X-ray photoelectron spectroscopy, Auger electron spectroscopy, and density functional theory calculations. We identify the sequential chemical transformation pathways from bond cleavage to the formation of intermediates and final products under operational conditions. Accumulative surface adsorption of CH 3 O species on metallic Cu(100) impedes the decomposition of CH 3 OH. Co-dosing on metallic Cu(100) with low pressures of 1·10 -4 Torr CH 3 OH + 1·10 -4 Torr O 2 results in partial oxidation of CH 3 OH, where the chemisorbed O ads reduces surface sites available for CH 3 O adsorption, decreasing the surface activity for CH 3 OH decomposition. In contrast, the Cu 2 O overlayer formed under the elevated pressures of 0.33 Torr CH 3 OH + 0.66 Torr O 2 promotes the total oxidation of CH 3 OH into the final products of CO 2 and H 2 O, arising from the active reaction 2 between lattice O within Cu 2 O and intermediates of CH 3 O, CH 2 O, HCOO, and CO. Despite the more favorable O-H bond scission, C-O bond scission also occurs to result in surface accumulation of CH x on metallic Cu(100), blocking active sites for decomposition reactions of CH 3 OH and CH 3 O. By comparison, the CH x species on the Cu 2 O-covered Cu(100) undergo oxidation into CO 2 and H 2 O with lattice O in the Cu 2 O overlayer, thereby freeing active sites for the total oxidation of CH 3 OH. These results highlight the distinct roles of metallic Cu and Cu 2 O in the pathways of CH 3 OH decomposition and oxidation reactions, offering practical insights for the design of Cu-based catalysts with tailored reactivity and selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of Sodium and Magnesium Ions on the Photochemically Induced Heterogeneous Formation of Manganese Oxides and Their Structural Evolution

Manganese (Mn) oxides are abundant in aquatic and terrestrial environments, where they play significant roles in redox cycling and biological metabolisms. We recently observed that Mn oxides were homogeneously formed during the abiotic oxidation of Mn 2+ (aq) to Mn(IV) by O 2 •– via nitrate photolysis, at a rate comparable to that of biotic Mn oxide formation. On the other hand, for the heterogeneous formation of Mn oxides, the presence of a substrate can alter the required thermodynamic driving force, which may affect their crystalline phases and further influence the oxidative capability of redox cycling in environmental systems. However, little is known about the photochemically induced heterogeneous formation of Mn oxides on substrates. In this study, we investigated the heterogeneous formation of Mn oxides on a quartz substrate in the presence of two environmentally abundant cations, Na + and Mg 2+ . In contrast to homogeneously generated Mn oxides, the heterogeneously formed Mn oxides displayed faster crystalline phase evolutions and morphological changes over time. Additionally, the coexistence of Na + and Mg 2+ ions greatly affected the initial crystalline phases and the phase evolution, as well as the surface morphologies of the Mn oxides. Finally, these discoveries contribute to our understanding of how various Mn oxides form in nature and provide insights into the processes involved in manufacturing specific Mn oxide crystalline structures for engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning the surface reactivity of oxides by peroxide species

The Mars–van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H 2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomistic Origins of Reversible Noncatalytic Gas–Solid Interfacial Reactions

Noncatalytic gas-solid reactions are a large group of heterogeneous reactions that are usually assumed to occur irreversibly because of the strong driving force to favor the forward direction toward the product formation. Using the example of Ni oxidation into NiO with CO 2 , herein we demonstrate the existence of the reverse element that results in the NiO reduction from the countering effect of the gaseous product of CO. Using in-situ electron microscopy observations and atomistic modeling, we show that the oxidation process occurs via preferential CO 2 adsorption along step edges that results in step-flow growth of NiO layers, and the presence of Ni atoms on the flat NiO surface promotes the nucleation of NiO layers. Simultaneously, the NiO reduction happens via preferential step-edge adsorption of CO that leads to the receding motion of atomic steps, and the presence of Ni vacancies in the NiO surface facilitates the CO adsorption induced surface pitting. Based on the in-situ TEM observations, temperature and CO 2 pressure effect maps are constructed to illustrate the spatiotemporal dynamics of the competing NiO redox reactions. We report, these results demonstrate the rich gas-solid surface reaction dynamics induced by the co-existing forward and reverse reaction elements and have practical applicability in manipulating gas-solid reactions via controlling the gas environment or atomic structure of the solid surface to steer the reaction toward the desired direction.

25 ENERGY STORAGE↗
DOE OSTI2022

In Situ Monitoring of H 2 -Induced Nonstoichiometry in Cu 2 O

Nonstoichiometry plays a pivotal role in the functioning of oxide materials, but it is challenging to measure the non-stoichiometric formation and the resulting charge redistribution around the point defects. Using ambient-pressure X-ray photoelectron spectroscopy and Auger electron spectroscopy to monitor the reduction of Cu 2 O in H 2 , we identify the formation of an intermediate, oxygen-deficient Cu 2 O phase and its progressive inward growth into the deeper region of the oxide. Complemented by DFT modeling, we show that the oxygen-deficient Cu 2 O formation occurs via molecular H 2 adsorption at the Cu 2 O surface, which results in the loss of lattice O from the formation of H 2 O molecules that desorb spontaneously from the oxide surface. The resulting oxy-gen-deficient Cu 2 O is a stable intermediate that persists before the Cu 2 O is fully reduced to metallic Cu. The O vacancy induced charge redistribution of the coordinating Cu atoms results in a satellite feature in Cu LMM, which can be used a fingerprint to identify the nonstoichiometry and local charge transfer in non-stoichiometric oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Process-Specific Effects of Sulfate on CaCO 3 Formation in Environmentally Relevant Systems

Additives, such as ions, small molecules, and macromolecules, have been found to regulate the formation of CaCO 3 and control its morphologies and properties. However, a single additive usually affects dominantly one process in CaCO 3 's formation and is seldom found to significantly affect multiple CaCO 3 formation processes. In this work, we used in situ grazing incidence X-ray techniques to observe the heterogeneous formation of CaCO 3 and found that a series of formation processes (i.e., nucleation, growth, and Ostwald ripening) were modulated by sulfate. In the nucleation process, increased interfacial free energy and bulk free energy cooperatively increased the nucleation barrier and decreased nucleation rates. In the growth process, sulfate reduced the electrostatic repulsion between CaCO 3 precursors and nuclei, promoting CaCO 3 growth. This influence on the growth counteracted the inhibition effect in the nucleation process, causing a nearly 100% increase in the volume of heterogeneously formed CaCO 3 . Meanwhile, adsorbed sulfate on CaCO 3 nuclei may poison the surface of smaller CaCO 3 nuclei, inhibiting Ostwald ripening. These revealed sulfate's active roles in controlling CaCO 3 formation advance our understanding of sulfate-incorporated biomineralization and scaling phenomena in natural and engineered aquatic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Revealing an Intermediate Cu–O/OH Superstructure on Cu(110)

Identifying the atomic structure and formation mechanism of intermediates during chemical transformations is challenging because of their short-lived nature. With a combination of microscopic and spectroscopic measurements and first-principles calculations, herein we report the formation of a metastable intermediate Cu–O/OH superstructure during the reaction of hydrogen with oxygen-covered Cu(110). This superstructure resembles the parent c(6 × 2)-O phase and can be termed as c(6 × 2)-(4O+2OH) with OH groups occupying the missing Cu sites between isolated Cu atoms. Using atomistic calculations, we elucidate the reaction pathways leading to the c(6 × 2)-(4O+2OH) formation via both molecular and dissociative H 2 adsorption. In this work, the results demonstrate the complex surface dynamics resulting from the parallel reaction pathways and may open up the possibility of directing the reaction dynamics by deliberately manipulating transient surface structure and composition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of surface segregation on the oxidation resistance of Cu 3 Pt ( 100 )

Alloying element segregation often occurs under a reactive environment but its interplay with the subsequent surface oxidation of the alloy remains unclear. Using synchrotron-based ambient-pressure x-ray photoelectron spectroscopy, we dynamically monitor the surface segregation in Cu 3 Pt(100) in response to temperature and oxygen gas. Vacuum annealing leads to surface segregation of Cu along with the enrichment of Pt in the subsurface region. Upon switching to the O 2 atmosphere, dissociative chemisorption of oxygen does not change the surface segregation profile from that under the vacuum annealing condition. A stepwise increase in the oxygen pressure results in the transformation pathway of Cu → Cu 2 O → CuO, in which the selective oxidation of Cu gives rise to further accumulation of Pt underneath the oxide/alloy interface that hinders the supply of Cu from the bulk to the oxide/alloy interface, thereby leading to the termination of the surface oxidation after the Cu 2 O → CuO conversion is completed. This differs from the transformation pathway of Cu → Cu 2 O → Cu 2 O/CuO for the oxidation of pure Cu and Cu-Au alloys, in which the oxidation of Cu continues and the Cu 2 O/CuO bilayer growth is constantly maintained. Furthermore, these key differences provide useful insight into alloy design for controlling the surface properties such as corrosion resistance and catalytic performance of Cu base alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microbial production of megadalton titin yields fibers with advantageous mechanical properties

Manmade high-performance polymers are typically non-biodegradable and derived from petroleum feedstock through energy intensive processes involving toxic solvents and byproducts. While engineered microbes have been used for renewable production of many small molecules, direct microbial synthesis of high-performance polymeric materials remains a major challenge. Here we engineer microbial production of megadalton muscle titin polymers yielding high-performance fibers that not only recapture highly desirable properties of natural titin (i.e., high damping capacity and mechanical recovery) but also exhibit high strength, toughness, and damping energy — outperforming many synthetic and natural polymers. Structural analyses and molecular modeling suggest these properties derive from unique inter-chain crystallization of folded immunoglobulin-like domains that resists inter-chain slippage while permitting intra-chain unfolding. These fibers have potential applications in areas from biomedicine to textiles, and the developed approach, coupled with the structure-function insights, promises to accelerate further innovation in microbial production of high-performance materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coupling between bulk thermal defects and surface segregation dynamics

Surface segregation is a phenomenon that depends on the delicate interplay between thermodynamic driving forces and kinetic obstacles, for which elevated temperature is often needed to enhance the atom mobility and reach equilibrium. Using the classic system of Cu 3 Au ( 100 ) under nonisothermal conditions, in this study, we show an adatom process underlying transient surface segregation dynamics through the temperature-change-driven creation and annihilation of thermal vacancies in the bulk and the resulting bulk-surface mass exchanges. This is demonstrated by monitoring the surface composition evolution of Cu 3 Au ( 100 ) with temperature changes between 250 and 500 ° C , showing that the increase in temperature decreases monotonically the surface Au concentration as a result of the transfer of more Cu than Au from the bulk to the surface to form Cu-rich clusters of adatoms. Such a bulk thermal defect effect is expected to be universal in inducing the disparity in the bulk-surface mass exchanges of dissimilar atoms in multicomponent materials because of the inherent differences in the vacancy formation energies of the constituent atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sulfate-Controlled Heterogeneous CaCO 3 Nucleation and Its Non-linear Interfacial Energy Evolution

Unveiling the effects of an environmental abundant anion “sulfate” on the formation of calcium carbonate (CaCO 3 ) is essential to understand the formation mechanisms of biominerals like corals and brachiopod shells, as well as the scale formation in desalination systems. However, it was experimentally challenging to elucidate the sulfate–CaCO 3 interactions at the explicit first step of CaCO 3 formation: nucleation. In addition, there is limited quantitative information on the precise control of nucleation kinetics. Here, heterogeneous CaCO 3 nucleation is monitored in real time as a function of sulfate concentrations (0–10 mM Na 2 SO 4 ) using synchrotron-based grazing incidence X-ray scattering techniques. The results showed that sulfate can be incorporated in the nuclei, resulting in a nearly 90% decrease in the CaCO 3 nucleation rate, causing a 120% increase in the CaCO 3 nucleus size, and inhibiting the vaterite-to-calcite phase transformation. Moreover, this work quantitatively relates sulfate concentrations to the effective interfacial energies of CaCO 3 and finds a non-linear trend, suggesting that CaCO 3 heterogeneous nucleation is more sensitive at a low sulfate concentration. This study can be readily extended to study other additives and obtain quantitative relationships between additive concentrations and CaCO 3 interfacial energies, a key step toward achieving natural and engineered controls on CaCO 3 nucleation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗