Real time depth-of-interaction correction for coded-aperture, gamma-ray images
Not Available
Ziock, K. P.↗
Engineering topics
Ziock, K. P.
Publications and source records attributed to Ziock, K. P..
Three-Dimensional Event Localization in Bulk Scintillator Crystals Using Optical Coded Apertures
Scintillator-based detectors are among the most commonly used methods for detecting ionizing radiation. Scintillators provide a reliable, cost-effective, and simple way to make large-volume detectors. Furthermore, localizing the position of the interactions in three dimensions within the crystals is useful to a wide array of fields. The most straightforward way of doing this is to pair the crystal with a position-sensitive phototransducer (PT). This allows for measurement of the shape of the light spot at the PT plane. Using this information, various methods exist to localize the gamma-ray interaction in the crystal; however, the position resolution worsens the farther the event occurs from the PT plane. To improve on the localization ability, this work uses an optical coded-aperture shadow mask between the crystal and the PT. In addition, the recorded detector response is used in reconstructing the event over the entire depth of the crystal, and the “sharpest” reconstructed image gives an event's depth. The lateral position is given from the standard coded-aperture image reconstruction. Lastly, experimental results obtained by emulating a 26-mm-thick crystal using a thin 1-mm-thick NaI(Tl) crystal and different amounts of light pipe between the crystal and the PT plane achieved ~ 1 to 2-mm resolution in all three dimensions throughout most of the 26-mm-thick crystal.
36 MATERIALS SCIENCE↗
Bragg crystal polarimeter for the Spectrum-X-Gamma mission
A Bragg crystal polarimeter for the focal plane of the SODART telescope on the Spectrum-X-Gamma mission is being designed. A mosaic graphite crystal will be oriented at 45 deg to the optic axis of the telescope, thereby preferentially reflecting those X-rays which satisfy the Bragg condition and have electric vectors that are perpendicular to the plane defined by the incident and reflected photons. The reflected X-rays will be detected by an imaging proportional counter with the image providing direct X-ray aspect information. The crystal will be about 50 microns thick to allow X-rays with energies of 4 keV or greater to be transmitted to a lithium block mounted below the graphite. The lithium is used to measure the polarization of these high energy X-rays by exploiting the polarization dependence of Thomson scattering. The development of thin mosaic graphite crystals is discussed and recent reflectivity, transmission, and uniformity measurements are presented.
Holley, J.↗