Search NASA⌕ Search

Engineering topics

Zuba, Mateusz

Publications and source records attributed to Zuba, Mateusz.

At least 19 records

Aqueous solution-based synthesis approach for carbon-disordered rocksalt composite cathode development and its limitations

Disordered rocksalt cathodes exhibit high specific capacities and high energy density; however, their low electronic conductivity poses a great challenge. Herein, we explored an aqueous-solution-based synthesis route that involves controlling the surface charges of Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 (LMTOF) to be anchored by a few-layer reduced graphene oxide (rGO) for the first time. The uniform rGO wrapping on the surface of the LMTOF particles is achieved by electrostatic attraction between the negatively charged rGO and positively charged LMTOF particles. Although the initial specific capacity of rGO-LMTOF composite increased by 58 % compared to the pristine LMTOF, the composite experienced a severe capacity fade over cycling. The synthesis process in an aqueous medium resulted in Li + /H + exchange and TM dissolution as evidenced from inductively coupled plasmon analysis and X-ray diffraction analysis. Therefore, this work suggests the search for alternative media or conditions for the synthesis of carbon-disordered rock salt cathode composite.

25 ENERGY STORAGE↗

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes in a Localized High‐Concentration Electrolyte

Abstract Lithium (Li)‐rich transition metal oxide cathodes with a cation disordered rock salt structure (DRX) are increasingly gaining popularity for advanced Li batteries as they offer high capacity and cost benefits over the commonly used layered Li transition metal oxide cathodes. However, the performance of DRX cathodes and their applications are limited by severe side reactions between the cathode and the state‐of‐the‐art carbonate‐based electrolytes at high voltage of 4.8 V, transition metal dissolution, and structural instability of the cathode particles. In this work, an advanced localized high‐concentration electrolyte (LHCE) is developed to form a stable cathode‐electrolyte interphase and mitigate structural instability of the Li 1.13 Mn 0.66 Ti 0.21 O 2 (LMTO) DRX during electrochemical cycling. Li||LMTO half cells with the LHCE demonstrate increased capacity, cycling stability, and superior rate capability compared with cells containing a conventional carbonate electrolyte. For instance, the Li||LMTO cells cycled in LHCE show a higher initial capacity of 205.2 mAh g −1 and a better capacity retention of 72.5% after 200 cycles at a current density of 20 mA g −1 than those with the conventional electrolyte (initial capacity of 187.7 mAh g −1 and capacity retention of 19.9%). This work paves the way to the development of practical DRX cathode‐based high‐energy Li batteries.

25 ENERGY STORAGE↗

Complex defect chemistry of hydrothermally-synthesized Nb-substituted β$'$-LiVOPO 4

Lithium vanadyl phosphate (LiVOPO 4 ) is a next-generation multielectron battery cathode that can intercalate up to two Li-ions per V-ion through the redox couples of V 4+ /V 3+ and V 5+ /V 4+ . However, its rate capacity is undermined by the sluggish Li-ion diffusion in the high-voltage region (4 V for V 5+ /V 4+ redox). Nb substitution was used to expand the crystal lattice to facilitate Li-ion diffusion. Here, in this work, Nb substitution was achieved via hydrothermal synthesis, which resulted in a new, lower symmetry β'-LiVOPO 4 phase with preferential Nb occupation of one of the two V sites. This phase presents complex defect chemistries, including cation vacancies and hydrogen interstitials, characterized by a combination of X-ray and neutron diffraction, elemental and thermogravimetric analyses, X-ray absorption spectroscopy, and magnetic susceptibility measurements. The Nb-substituted samples demonstrated improved capacity retention and rate capabilities in the high-voltage region, albeit an enlarged voltage hysteresis related to a partial V 4+ /V 3+ redox reaction, as evidenced by ex situ X-ray absorption spectroscopy and pair distribution function analysis. This work highlights the importance of understanding the complex defect chemistry and its consequence on electrochemistry in polyanionic intercalation compounds.

36 MATERIALS SCIENCE↗

Al Substitution for Mn during Co-Precipitation Boosts the Electrochemical Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2

We report nickel-rich layered oxides, such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC 811), are considered as one of the most promising candidates for the next-generation cathode because of their high energy densities and relatively low cost. However, the poor first Coulombic efficiency of NMC 811 leads to around a 15% capacity loss in the first cycle at a cut-off voltage of 4.4 V. Moreover, the structure degradation during cycling results in capacity fading and safety concerns, due to potential oxygen loss after charging. Here, with aluminum substitution for manganese through a developed continuous co-precipitation approach, the electrochemical performance of NMC 811 cathodes has been greatly enhanced. Among different Al% substituted samples, LiNi 0.8 Mn 0.06 Co 0.1 Al 0.04 O 2 cathodes reduced by 50% the first capacity loss of pristine NMC 811(18.0 vs 35.9 mAh g -1 ) and improved the capacity retention from 81.4 to 96.4% after 60 cycles at 0.5C in the voltage range of 2.8–4.4 V.

25 ENERGY STORAGE↗

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Nickel-rich layered metal oxide LiNi 1–y–z Mn y Co z O 2 (1 – y – z ≥ 0.8) materials are the most promising cathodes for next-generation lithium-ion batteries in electric vehicles. However, they lose more than 10% of their capacity on the first cycle, and interfacial/structural instability causes capacity fading. Coating and substitution are possible direct and effective solutions to solve these challenges. In this Letter, Nb coating and Nb substitution on LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is easily produced through a scalable wet chemistry method followed by sintering from 400 to 800 °C. A Li-free Nb oxide treatment is found to remove surface impurities forming a LiNbO 3 /Li 3 NbO 4 surface coating, to reduce the first capacity loss and to improve the rate performance. Furthermore, Nb substitution stabilizes the structure, as evidenced by less heat evolution on heating, thus providing better long cycling stability with a 93.2% capacity retention after 250 cycles.

36 MATERIALS SCIENCE↗

Structural Phase Transitions of NbO 2 : Bulk versus Surface

The metal to insulator transition of NbO 2 has been predicted to be a result of a structural phase transition (SPT) governed by Peierls physics. However, direct observation of the SPT using experimental techniques is still restricted by the extremely high transition temperature (810 °C) and the proclivity for NbO 2 to oxidize into Nb 2 O 5 above 400 °C when exposed to air. In this work, we address these issues and employ temperature-dependent X-ray spectroscopy to describe the SPT of NbO 2 from the bulk to surface. Temperature-dependent extended X-ray absorption fine structure spectroscopy (T-EXAFS) reveals a gradual weakening of the bulk Nb dimers over a large temperature range, which is indicative of a second-order Peierls mechanism. From these measurements, we determine the critical dimer distance to be 2.77 Å. Our T-EXAFS observations are supported by density functional theory of the phonon dispersion and the electronic density of states of NbO 2 , which conclude that the dimerization is responsible for the insulating phase. The dimerization does not extend to the topmost layers, where an oxygen rich surface reconstruction is preferred irrespective of temperature even in extremely reducing environments; changes in the low-energy electron diffraction patterns are attributed to oxygen concentration and are independent of the underlying bulk phase transitions of NbO 2 .

36 MATERIALS SCIENCE↗

Vanadyl Phosphates A x VOPO 4 (A = Li, Na, K) as Multielectron Cathodes for Alkali-Ion Batteries

Vanadyl phosphates comprise a class of multielectron cathode materials capable of cycling two Li + , about 1.66 Na + , and some K + ions per redox center. In this review, structures, thermodynamic stabilities, and ion diffusion kinetics of various A x VOPO 4 (A = Li, Na, K, NH 4 ) polymorphs are discussed. Both the experimental data and first-principle calculations indicate kinetic limitations for alkali metal ions cycling, especially between for 0 ≤ x ≤ 1, and metastability of phases with x > 1. This creates challenges for multiple-ion cycling, as the slow kinetics call for nanosized particles, which being metastable and reactive with organic electrolytes are prone to side reactions. Thus, various synthesis approaches, surface coating, and transition metal ion substitution strategies are discussed here as possible ways to stabilize A x VOPO 4 structures and improve alkali metal ion diffusion. Finally, the role of advanced characterization techniques, such as X-ray absorption spectroscopy, diffraction, pair distribution function analysis and 7 Li and 31 P NMR, in understanding the reaction mechanism from both structural and electronic points of view is emphasized.

25 ENERGY STORAGE↗