Search NASA⌕ Search

Engineering topics

Zuber, M. T.

Publications and source records attributed to Zuber, M. T..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Regional Elevations in the Southern Hemisphere of Mars From the Mars Orbiter Laser Altimeter

The Mars Orbiter Laser Altimeter (MOLA) is an instrument on the Mars Global Surveyor (MGS) spacecraft that is currently providing the first high vertical and spatial resolution topographic measurements of surface elevations on Mars. The shot size in the mapping orbit is about 100 m and the shot-to-shot spacing is 330 m. The instrument has a vertical precision of 37.5 cm and a vertical accuracy that depends on the radial accuracy of the MGS orbit that is currently in the range 5-30 km. The initial focus on observations in the nominal mapping mission will be on the southern hemisphere, which was not sampled during the MGS aerobraking hiatus and Science Phasing orbits. During the first several weeks of global mapping there will be emphasis on producing a digital terrain model (DTM) of the Mars '98 landing site.

Smith, D. E.↗
NASA NTRS1999

Mola's First Observations of the Southern Hemisphere Topography of Mars

Towards the end of February 1999, the Mars Global Surveyor (MGS) spacecraft is expected to enter a near-circular polar orbit around Mars at an altitude of about 400 km. At this time the Mars Orbiter Laser Altimeter (MOLA) will begin near-continuous operation and acquire topography of the full planet. The initial areas of study will be concentrated in the southern hemisphere with particular interest in the polar region near the targeted landing site of the Mars Polar Lander. In addition to topography, MOLA matched filter pulse width data will be used to assess foot-print-scale surface roughness in the region. Such observations will also be applied in future studies for assessment of the Mars '01 landing site in the latitude range 15 degrees south to 5 degrees north.

Smith, David E.↗
NASA NTRS1998

Observations of the north polar region of Mars from the Mars orbiter laser altimeter

Elevations from the Mars Orbiter Laser Altimeter (MOLA) have been used to construct a precise topographic map of the martian north polar region. The northern ice cap has a maximum elevation of 3 kilometers above its surroundings but lies within a 5-kilometer-deep hemispheric depression that is contiguous with the area into which most outflow channels emptied. Polar cap topography displays evidence of modification by ablation, flow, and wind and is consistent with a primarily H2O composition. Correlation of topography with images suggests that the cap was more spatially extensive in the past. The cap volume of 1.2 x 10(6) to 1.7 x 10(6) cubic kilometers is about half that of the Greenland ice cap. Clouds observed over the polar cap are likely composed of CO2 that condensed out of the atmosphere during northern hemisphere winter. Many clouds exhibit dynamical structure likely caused by the interaction of propagating wave fronts with surface topography.

Flight Experiment↗
NASA NTRS1998

Topography of the northern hemisphere of Mars from the Mars Orbiter Laser Altimeter

The first 18 tracks of laser altimeter data across the northern hemisphere of Mars from the Mars Global Surveyor spacecraft show that the planet at latitudes north of 50 degrees is exceptionally flat; slopes and surface roughness increase toward the equator. The polar layered terrain appears to be a thick ice-rich formation with a non-equilibrium planform indicative of ablation near the periphery. Slope relations suggest that the northern Tharsis province was uplifted in the past. A profile across Ares Vallis channel suggests that the discharge through the channel was much greater than previously estimated. The martian atmosphere shows significant 1-micrometer atmospheric opacities, particularly in low-lying areas such as Valles Marineris.

unmanned↗
NASA NTRS1998

An Overview of Observations of Mars' North Polar Region From the Mars Global Surveyor Laser Altimeter

Since its arrival at Mars on September l5, 1997, the Mars Global Surveyor (MGS) has been in a near-polar elliptical orbit, with the orbital eccentricity decreasing during orbital periapse passes where the spacecraft aerobrakes through the martian atmosphere. The Mars Orbiter Laser Altimeter (MOLA), an instrument on the MGS, has the ability to range to the martian surface during nonaerobraking passes. MOLA can operate whenever the range from the spacecraft to the surface is less than 786 km, with the limit determined by the number of bits encoded for the range measurement During the capture orbit, aerobraking hiatus, and science phasing orbit (SPO) mission phases, MOLA acquired approximately 200 profiles across the northern hemisphere of Mars and provided more than 2,000,000 measurements of the radius of the planet. These observations cover the region from the north pole to about 10 degrees S latitude with a precision of a few tens of centimeters and an accuracy (at present) of about 30 in. Absolute accuracy of the elevations is limited by the knowledge of the MGS orbits; these should improve later in the mission due to a more optimal tracking geometry, an improved gravitational field, and the use of the high-gain antenna once the spacecraft achieves its approximately 400-km-altitude circular mapping orbit. MOLA measurements so far show a planet with a low, flat high-latitude region in the north and a higher, topographically rougher terrain nearer the equator. The north polar cap stands approximately 2-3 km above the surrounding terrain and displays deep chasms and complex structure. MOLA measurements of elevation, 1064-nm reflectivity, and backscattered pulse width indicate that the layered terrains are composed mainly of ice.

Smith, D. E.↗
NASA NTRS1998

The Role of Viscous Deformation in the Morphology of the Martian North Polar Cap

The first detailed topographic measurements of Mars' north polar cap have recently been collected by the Mars Orbiter Laser Altimeter (MOLA), an instrument on Mars Global Surveyor (MGS). These new data provide the opportunity to address in a quantitative way the processes responsible for the origin and evolution of the martian polar caps. On the basis of imaging and spectral observations from the Mariner 9 and Viking orbiters, it was recognized that a number of physical mechanisms. including radiative transfer, wind erosion, and viscous flow, represent possible or probable contributors to the morphology of the polar cap. Here we review rheological data for H2O and CO2 at conditions relevant to the martian polar regions. We then use MOLA topographic profiles to perform a preliminary assessment of the role of power law flow in contributing to the regional-scale planform of the north polar cap.

Zuber, M. T.↗
NASA NTRS1998

Lunar Basins: New Evidence from Gravity for Impact-Formed Mascons

The prominent gravity highs (mascons) associated with uncompensated mass anomalies in lunar mare basins are a dramatic expression of the present-day rigidity of the lunar lithosphere. First discovered in Lunar Orbiter tracking data, these about 350-mGal gravity highs have been redetermined from the analysis of Clementine and historical tracking. These highs coincide with topographic lows, indicating nonisostatic support. One of the rediscoveries of this analysis is the encirclement of the highs by substantial negative anomalies over topographic highs. Recent gravity fields are providing the increased resolution necessary to determine the causes of this unique mascon signature. The compensation of the basin anomalies remains controversial. The mascon highs have long been interpreted as the result of mare loading, subsequent to the decay of residual stresses resulting from the impact. Substantially more mare fill is required to produce mascon highs than has been inferred on geological grounds, and the amount of near-surface mass deficit required to produce a gravity most exceeds bounds inferred from terrestrial examples. This problem is most acute for the youngest basin, Orientale. Recent gravity fields from Lunar Prospector have suggested mascon highs associated with nonmare basins such as Mendel-Rydberg, or minimally filled basins like Humboldtianum, further calling this explanation into question. We suggest that the mascon gravity signal is produced by a combination of crustal thickness changes, manifested by central mantle uplift, outward displacement of crust, and downward flexure of the lithosphere under mare loading. The mantle uplift is superisostatic, maintained by residual stresses resulting from the process of impact cratering and modification. In particular, the process of crater collapse and mantle rebound terminates abruptly, leaving the mantle plug in a non-equilibrium state, surrounded by a ring of thickened crust. Viscous relaxation over geological timescales has erased some but not all of the signature of the impact process. Mantle uplift inferred from gravity modeling is inversely correlated with age. While the oldest basins such as South Pole Aitken are mainly compensated isotatically, the younger basins appear to have been in a state of superisostatic loading prior to mare emplacement. If this is true, this places an important constraint on the impact process at basin scales. The idea that rebound of the transient crater via acoustic fluidization may freeze substantial stresses imcomplete to this day, may be tested by examining the gravity signatures of major basins on terrestrial bodies. The moon provides the clearest resolved examples to date, but uncertainty in gravity knowledge remains problematic.

Neumann, Gregory A.↗
NASA NTRS1998

Inferences About the Early Moon From Gravity and Topography

Recent spacecraft missions to the Moon have significantly improved our knowledge of the lunar gravity and topography fields, and have raised some new and old questions about the early lunar history. It has frequently been assumed that the shape of the Moon today reflects an earlier equilibrium state and that the Moon has retained some internal strength. Recent analysis indicating a superisostatic state of some lunar basins lends support to this hypothesis. On its simplest level, the present shape of the Moon is slightly flattened by 2.2 +/- 0.2 km while its gravity field, represented by an equipotential surface, is flattened only about 0.5 km. The hydrostatic component to the flattening arising from the Moon's present day rotation contributes only 7 m. This difference between the topographic shape of the MOon and the shape of its gravitational equipotential has frequently been explained as the "memory" of an earlier moon that was rotating faster and had a correspondingly larger hydrostatic flattening. To obtain this amount of hydrostatic flattening from rotation alone, and accounting for the contribution of the present-day gravity field, the Moon's rotation rate would need to be about 15x greater than at present, leading ot a period of < 2 days. Maintaining its synchronous rotation with Earth would require a radius for the Moon's orbit of approximately 9 Earth Radii. Unfortunately, our confidence in the observed lunar flattening is not as great as we would like. The uncertainty of .02 km may not properly reflect the limitations of the Clementine dataset, which did not sample poleward of latitudes 81 N and 79 S. Also, the large variation of topography +/- 8 km seen on the MOon dwarfs our estimate fo the flattening. Further the lunar south pole is on the edge of, or possibly inside the massive deep, South Pole-Aitken Basin. Thus, polar radii could be underestimated. This would yield a smaller flattening, which would imply a greater lunar rotation period and orbital radius. However, Basin compensation states and analyses of support and relaxation of topography at long wavelengths point to a lunar shape that has retained a flattening from an earlier faster rotation period.

Smith, D. E.↗
NASA NTRS1996

Plains Tectonics on Venus

Tectonic deformation in the plains of Venus is pervasive, with virtually every area of the planet showing evidence for faulting or fracturing. This deformation can be classified into three general categories, defined by the intensity and areal extent of the surface deformation: distributed deformation, concentrated deformation, and local fracture patterns.

tectonics tectonic formation tectonic deformation ↗
NASA NTRS1995

An Experimental Study of Incremental Surface Loading of an Elastic Plate: Application to Volcano Tectonics

Models of surface fractures due to volcanic loading an elastic plate are commonly used to constrain thickness of planetary lithospheres, but discrepancies exist in predictions of the style of initial failure and in the nature of subsequent fracture evolution. In this study, we perform an experiment to determine the mode of initial failure due to the incremental addition of a conical load to the surface of an elastic plate and compare the location of initial failure with that predicted by elastic theory. In all experiments, the mode of initial failure was tension cracking at the surface of the plate, with cracks oriented circumferential to the load. The cracks nucleated at a distance from load center that corresponds the maximum radial stress predicted by analytical solutions, so a tensile failure criterion is appropriate for predictions of initial failure. With continued loading of the plate, migration of tensional cracks was observed. In the same azimuthal direction as the initial crack, subsequent cracks formed at a smaller radial distance than the initial crack. When forming in a different azimuthal direction, the subsequent cracks formed at a distance greater than the radial distance of the initial crack. The observed fracture pattern may explain the distribution of extensional structures in annular bands around many large scale, circular volcanic features.

Williams, K. K.↗
NASA NTRS1995

The Spreading of Variable-Viscosity Axisymmetric Radial Gravity Currents: Applications to the Emplacement of Venusian 'Pancake' Domes

The Magellan images of Venus have revealed a number of intriguing volcanic features, including the steep-sided or 'pancake' domes. These volcanic domes or flows have morphologies that suggest formation by a single continuous emplacement of lava with a higher viscosity than that of the surrounding basaltic plains. Numerous investigators have suggested that such high viscosity is due to high silica content, leading to the conclusion that the domes are evidence of evolved magmatic products on Venus. However, viscosity depends on crystallinity as well as on silica content: high viscosity could therefore also be due to a cooler (and therefore higher crystal content) lava. Models of dome emplacement which include both cooling and composition factors are thus necessary in order to determine the ranges of crystallinity and silica content which might lead to the observed gross dome morphologies. Accordingly, in this study domes are modelled as radial viscous gravity currents with an assumed cooling-induced viscosity increase to include both effects. Analytical and numerical results indicate that pancake dome formation is feasible with compositions ranging from basaltic to rhyolitic. Therefore, observations of gross dome morphology alone are insufficient for determining composition and the domes do not necessarily represent strong evidence for evolved magmatism on Venus.

Sakimoto, S. E. H.↗
NASA NTRS1994

Observations, models, and mechanisms of failure of surface rocks surrounding planetary surface loads

Geophysical models of flexural stresses in an elastic lithosphere due to an axisymmetric surface load typically predict a transition with increased distance from the center of the load of radial thrust faults to strike-slip faults to concentric normal faults. These model predictions are in conflict with the absence of annular zones of strike-slip faults around prominent loads such as lunar maria, Martian volcanoes, and the Martian Tharsis rise. We suggest that this paradox arises from difficulties in relating failure criteria for brittle rocks to the stress models. Indications that model stresses are inappropriate for use in fault-type prediction include (1) tensile principal stresses larger than realistic values of rock tensile strength, and/or (2) stress differences significantly larger than those allowed by rock-strength criteria. Predictions of surface faulting that are consistent with observations can be obtained instead by using tensile and shear failure criteria, along with calculated stress differences and trajectories, with model stress states not greatly in excess of the maximum allowed by rock fracture criteria.

Schultz, R. A.↗
NASA NTRS1994

The topography of Mars: A re-evaluation of current data

Our present knowledge of the topography of Mars is completely inadequate for addressing a wide range of geophysical, geological, and atmospheric problems. The data acquired to date by several techniques has not provided us with reliable and consistent values for even the equatorial and polar radii, and large uncertainties exist in the altitudes of many of the major volcanic constructs. While much of this can be blamed on a lack of reliable data, we feel that much more could be done to improve the analysis of the present data in a consistent global system that would necessarily involve the re-analysis of early spacecraft and Earth-based data in conjunction with more recent models of Mars' gravity field.

Smith, D. E.↗
NASA NTRS1994

Rheology, tectonics, and the structure of the Venus lithosphere

Given the absence of ground truth information on seismic structure, heat flow, and rock strength, or short wavelength gravity or magnetic data for Venus, information on the thermal, mechanical and compositional nature of the shallow interior must be obtained by indirect methods. Using pre-Magellan data, theoretical models constrained by the depths of impact craters and the length scales of tectonic features yielded estimates on the thickness of Venus' brittle-elastic lithosphere and the allowable range of crustal thickness and surface thermal gradient. The purpose of this study is to revisit the question of the shallow structure of Venus based on Magellan observations of the surface and recent experiments that address Venus' crustal rheology.

Zuber, M. T.↗
NASA NTRS1994

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

Zuber, M. T.↗
NASA NTRS1994

Progress in the development of the GMM-2 gravity field model for Mars

Last year we published the GMM-1 (Goddard Mars Model-1) gravity model for Mars. We have completely re-analyzed the Viking and Mariner 9 tracking data in the development of the new field, designated GMM-2. The model is complete to degree and order 70. Various aspects of the model are discussed.

Lemoine, F. G.↗
NASA NTRS1994

Preliminary solutions for the lunar gravity field from analysis of lunar orbiter tracking data

Knowledge of the gravitation field, in combination with surface topography, provides one of the principal means of inferring the internal structure of a planetary body. Previous analyses of the lunar gravitational field have been based on data from the Lunar Orbiters, the Apollo subsatellites, and the low altitude passes of the Apollo spacecraft. Recently, Konopliv et al. have reanalyzed all available Lunar Orbiter and Apollo subsatellite tracking data, producing a 60th degree and order solution. In preparation for the Clementine Mission to the Moon, we have also initiated a reanalysis of the Lunar Orbiter and Apollo subsatellite data. Our reanalysis takes advantage of advanced force and measurement modeling techniques as well as modern computational facilities. We applied the least squares collocation technique which stabilizes the behavior of the solution and high degree and order. The extension of the size of the field reduces the aliasing coming from the omitted portion of the gravitational field. This is especially important for the analysis of the tracking data from the Lunar Orbiters, as the periapse heights frequently ranged from 50 to 100 km.

Lemoine, F. G.↗