Search NASA⌕ Search

Engineering topics

Zuegel, J D

Publications and source records attributed to Zuegel, J D.

At least 19 records

A polar-drive-ignition design for the National Ignition Facility

Polar drive [Skupsky et al., Phys. Plasmas 11, 2763 (2004)] will enable direct-drive experiments to be conducted on the National Ignition Facility (NIF) [Miller et al., Opt. Eng. 43, 2841 (2004)], while the facility is configured for x-ray drive. A polar-drive ignition design for the NIF has been developed that achieves a gain of 32 in two-dimensional (2-D) simulations, which include single- and multiple-beam nonuniformities and ice and outer-surface roughness. This design requires both single-beam UV polarization smoothing and one-dimensional (1-D) multi-frequency modulator (MFM) single-beam smoothing to achieve the required laser uniformity. The multi-FM smoothing is employed only during the low-intensity portion of the laser pulse, allowing for the use of sufficient smoothing-by-spectral-dispersion bandwidth while maintaining safe laser operations during the high-intensity part of the pulse. This target is robust to all expected sources of perturbations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling hot-electron generation to long-pulse, high-intensity laser-solid interactions

Experiments have been performed to determine the effect of laser-pulse duration and energy on hot-electron-generation efficiency at high intensity. Thin copper foil targets were irradiated with 1 to 2100 J, 1 to 10 ps pulses focused to intensities >10{sup 18} W/cm{sup 2}. The target volume was varied from 75 x 75 x 3 {mu}m{sup 3} to 600 x 600 x 50 {mu}m{sup 3} to access a range of bulk thermal-electron temperatures up to several hundred electron volts. Comparison of K-photon spectroscopy measurements from these targets with electron transport and radiation-generation calculations indicates that the energy conversion efficiency into hot electrons is 20 {+-} 10%, independent of laser-pulse duration and energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Target-heating effects on the K{sub {alpha}{sub 1{sub ,{sub 2}}}}-emission spectrum from solid targets heated by laser-generated hot electrons

Target-heating effects on the K{sub {alpha}{sub 1{sub ,{sub 2}}}}-emission spectrum from small-mass Cu targets irradiated with 1-ps pulses focused to intensities >10{sup 18} W/cm{sup 2} have been observed. A collisional-radiative atomic physics model is unable to reproduce the time-integrated K{sub {alpha}{sub 1{sub ,{sub 2}}}}-emission spectrum from the smallest-mass targets when calculated with a single, time-independent thermal-electron temperature. When time-dependent heating to several hundred electron volts is included in the model, the synthetic spectra better reproduce the main observed spectral features.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling Hot-Electron Generation to High-Power, Kilojoule-Class Laser-Solid Interactions

Thin-foil targets were irradiated with high-power (1 < P_L < 210 TW), 10-ps pulses focused to intensities of I > 10^18 W/cm^2 and studied with K-photon spectroscopy. Comparing the energy emitted in K photons to target-heating calculations shows a laser-energy-coupling efficiency to hot electrons of n_L-e = 20+/-10%. Time-resolved x-ray emission measurements suggest that laser energy is coupled to hot electrons over the entire duration of the incident laser drive. Comparison of the K-photon emission data to previous data at similar laser intensities shows that n_L-e is independent of laser-pulse duration from 1 < tau_p < 10 ps.

Nilson, P M↗

Scaling Hot-Electron Generation to High-Power, Kilojoule-Class Laser-Solid Interactions

Thin-foil targets were irradiated with high-power (1{<=}P{sub L}{<=}210 TW), 10-ps pulses focused to intensities of I>10{sup 18} W/cm{sup 2} and studied with K-photon spectroscopy. Comparing the energy emitted in K photons to target-heating calculations shows a laser-energy-coupling efficiency to hot electrons of {eta}{sub L-e}=20{+-}10%. Time-resolved x-ray emission measurements suggest that laser energy is coupled to hot electrons over the entire duration of the incident laser drive. Comparison of the K-photon emission data to previous data at similar laser intensities shows that {eta}{sub L-e} is independent of laser-pulse duration from 1{<=}{tau}{sub p}{<=}10 ps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Intensity Laser-Plasma Interaction with Wedge-Shaped-Cavity Targets

High-intensity, short-pulse laser-interaction experiments with small-mass, wedge-shaped-cavity Cu targets are presented. The diagnostics provided spatially and spectrally resolved measurements of the Cu K alpha line emission at 8 keV. The conversion efficiency of short-pulse laser energy into fast electrons was inferred from the x-ray yield for wedge opening angles between 30° and 60° and for s- and p-polarized laser irradiation. Up to 36 7% conversion efficiency was measured for the narrowest wedge with p-polarization. The results are compared with predictions from two-dimensional particle-in-cell simulations.

Theobald, W↗

Direct-Drive Inertial Fusion Research at the University of Rochester's Laboratory for Laser Energetics: A Review

This paper reviews the status of direct-drive inertial confinement fusion (ICF) research at the University of Rochester's Laboratory for Laser Energetics (LLE). LLE's goal is to demonstrate direct-drive ignition on the National Ignition Facility (NIF) by 2014. Baseline "all-DT" NIF direct-drive ignition target designs have been developed that have a predicted gain of 45 (1-D) at a NIF drive energy of ~1.6 MJ. Significantly higher gains are calculated for targets that include a DT-wicked foam ablator. This paper also reviews the results of both warm fuel and initial cryogenic-fuel spherical target implosion experiments carried out on the OMEGA UV laser. The results of these experiments and design calculations increase confidence that the NIF direct-drive ICF ignition goal will be achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-Ray Spectroscopy of Solid-Density Plasmas in High-Intensity Laser Interactions

Intense laser–interaction experiments examining fast-electron production and energy deposition in solid-density plasmas were performed. Strong K-photon emission suppression with decreasing target-foil volume was observed. This observation is consistent with L→K and M→K electron transitions being affected by target heating. Bulk-electron temperatures of at least 200- to 300-eV are inferred for the smallest mass targets. Target heating is attributed to fast-electron recirculation inside the target.

x-ray spectroscopy, plasma, high-intensity lasers↗

X-Ray Spectroscopy of Solid-Density Plasmas in High-Intensity Laser Interactions

Intense laser-interaction experiments examining fast-electron production and energy deposition in solid-density plasmas were performed. Strong K-photon emission suppression with decreasing target-foil volume was observed. This observation is consistent with L->K and M->K electron transitions being affected by target heating. Bulk-electron temperatures of at least 200- to 300-eV are inferred for the smallest mass targets. Target heating is attributed to fast-electron recirculation inside the target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Novel Laser and Diagnostic Technologies for the OMEGA EP High-Energy Petawatt Laser

OMEGA EP (extended performance) is a petawatt-class laser facility that includes two NIF-like beamlines designed to operate in a chirped-pulse-amplifi cation mode to produce up to 2.6 kJ in a pulsewidth range of <1 to 100 ps at 1,053 nm. The OMEGA EP performance and the laser engineering of enabling technologies required to meet these goals are discussed.

chirped pulse amplification↗

Effective Verdet Constant in a Terbium-Doped-Core Phosphate Fiber

The concept of an effective Verdet constant is proposed and experimentally validated. The effective Verdet constant of light propagation in a fiber includes contributions from the materials in both the core and the cladding. It is measured in a 25 wt.% terbium-doped-core phosphate fiber to be -6.2±0.4 rad/ (Tm) at 1053 nm, which is six times larger than silica fiber. The result agrees well with Faraday rotation theory in optical fiber.

Sun, L↗

Bulk Heating of Solid-Density Plasmas During High-Intensity-Laser Plasma Interactions

K-shell x-ray spectroscopy is used to study the interaction of small-mass copper foil targets (>20 x 20 x 2 um^3) with a high-intensity (>10^19 W/cm^2) laser pulse. Efficient bulk heating to greater than 200 eV is demonstrated using collisional-energy transfer from recirculating fast electrons. K-photon yields and bulk-electron temperatures calculated by three-dimensional numerical target-heating simulations are in good agreement with the experimental measurements.

Nilson, P M↗

Spot-Shadowing Optimization to Mitigate Damage Growth in a High-Energy-Laser Amplifier Chain

A spot-shadowing technique to mitigate damage growth in a high-energy laser is studied. Its goal is to minimize the energy loss and undesirable hot spots in intermediate planes of the laser. A nonlinear optimization algorithm solves for the complex fields required to mitigate damage growth in the National Ignition Facility amplifier chain. The method is generally applicable to any large fusion laser.

Bahk, S -W↗

A high-resolution coherent transition radiation diagnostic for laser-produced electron transport studies (invited)

High-resolution images of the rear-surface optical emission from high-intensity (I{approx}10{sup 19} W/cm{sup 2}) laser illuminated metal foils have been recorded using coherent transition radiation (CTR). CTR is generated as relativistic electrons, generated in high-intensity laser-plasma interactions, exit the target's rear surface and move into vacuum. A transition radiation diagnostic (TRD) records time-integrated images in a 24 nm bandwidth window around {lambda}=529 nm. The optical transmission at {lambda}=1053 nm, the laser wavelength, is 15 orders of magnitude lower than the transmission at the wavelength of interest, {lambda}=527 nm. The detector is a scientific grade charge-coupled device (CCD) camera that operates with a signal-to-noise ratio of 10{sup 3} and has a dynamic range of 10{sup 4}. The TRD has demonstrated a spatial resolution of 1.4 {mu}m over a 1 mm field of view, limited only by the CCD pixel size.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Focal-Spot Diagnostic for On-Shot Characterization of High-Energy Petawatt Lasers

An on-shot focal-spot diagnostic for characterizing high-energy, petawatt-class laser systems is presented. Accurate measurements at full energy are demonstrated using high-resolution wavefront sensing in combination with techniques to calibrate on-shot measurements with low-power sample beams. Results are shown for full-energy activation shots of the OMEGA EP Laser System.

high-intensity lasers↗

On-Shot Focal-Spot Characterization Technique Using Phase Retrieval

We present an on-shot focal-spot characterization technique based on a phase-retrieval scheme that retrieves near-field phase from multiplane focal-spot measurements in an experimental target chamber. The technique is easy to implement inside a target chamber and is demonstrated in a multiterawatt laser system. It is also found that phase retrieval can quantitatively detect residual angular dispersion coming from the pulse compressor misalignment.

Bahk, S -W↗

High-Dynamic-Range Single-Shot Cross-Correlator Based on an Optical Pulse Replicator

The operation of a single-shot cross-correlator based on a pulse replicator is described. The correlator uses a discrete sequence of sampling pulses that are nonlinearly mixed with the pulse under test. The combination of a high reflector and partial reflector replicates an optical pulse by multiple internal reflections and generates a sequence of spatially displaced and temporally delayed sampling pulses. This principle is used in a cross-correlator characterizing optical pulses at 1053 nm. A dynamic range higher than 60 dB is obtained over a temporal range larger than 200 ps.

ultrafast measurements↗

LLE Review 114 (January-March 2008)

This volume of the LLE Review, covering January-March 2008, features 'Cryogenic Targets: Current Status and Future Development', by D. R. Harding, D. H. Edgell, M. D. Wittman, L. M. Elasky, S. J. Verbridge, A. J. Weaver, L. D. Lund, W. Seka, W. T. Shmayda, R. T. Janezic, M. J. Shoup III, M. Moore, R. Junquist, and A. V. Okishev. In this article (p. 57), the authors report on the status of layering cryogenic DT and D{sub 2} targets at LLE for inertial confinement fusion (ICF) targets. This critical effort achieves the important milestone of routinely providing cryogenic DT targets that meet the 1.0-{micro}m (rms) OMEGA ice-quality-surface specification. The best D{sub 2}-ice layers produced so far (rms roughness of 1.1 {micro}m) are approaching the quality typically achieved in DT targets. Efforts to improve the consistency of this process are reported along with investigations supporting the National Ignition Campaign studying issues relevant to indirect-drive and direct-drive cryogenic targets. Additional highlights of recent research presented in this issue include the following: (1) an improved laser speckle smoothing scheme that augments the current NIF 1-D SSD system by using multiple-FM modulators (MultiFM 1-D SSD) (p. 73). With a judicious choice of modulator frequencies, MultiFM 1-D SSD smoothes resonances produced at the higher spatial frequencies and can attain similar or even faster smoothing rates compared to the baseline NIF 2-D SSD system. DRACO simulations have shown that MultiFM 1-D SSD beam smoothing is sufficient for the direct-drive-ignition targets and pulse shapes analyzed thus far, and may even allow reducing the bandwidth enough to eliminate the need for dual-tripler frequency conversion on the NIF. (2) describes a time-gated, monoenergetic proton radiography that provides unique measurements of implosion dynamics of spherical targets in direct-drive inertial confinement fusion (ICF) (p. 81). Radiographs obtained at different implosion times, from acceleration, through coasting, deceleration, to final stagnation, display a comprehensive picture of spherical ICF implosion. Critical information inferred from such images characterizes the spatial structure and temporal evolution of self-generated fields and plasma areal density. (3) describes a single-shot cross-correlator based on a pulse replicator that produces a discrete sequence of sampling pulses that are nonlinearly mixed with the pulse under test (p. 86). The combination of a high reflector and partial reflector replicates an optical pulse by multiple internal reflections and generates a sequence of spatially displaced and temporally delayed sampling pulses. This principle is used in a cross-correlator characterizing optical pulses at 1053 nm, where a dynamic range higher than 60 dB is obtained over a temporal range larger than 200 ps. The dynamic range can be extended with standard optical-density filters and the temporal range extended with larger optics. (4) presents a novel focal-spot diagnostic developed for OMEGA EP that will be used to characterize on-shot focal spots to support high-quality laser-matter interaction experiments (p. 94). The complex fields in the region of the high-energy focus are calculated using high-resolution measurements of the main beam wavefront using the focal-spot diagnostic (FSD) located on the short-pulse diagnostic package and a careful calibration of the transfer wavefront between the FSD instrument and target chamber center. The concept of this calibration procedure is experimentally verified in the Multi-Terawatt (MTW) Laser System, which serves as a development platform for OMEGA EP. A technique based on phase retrieval is employed for the transfer-wavefront calibration since the OMEGA EP infrastructure cannot be replicated in the MTW laser; however, this approach also shows promise as an alternative method for OMEGA EP. (5) report on a systematic study to improve the laser-damage resistance of multilayer high-reflector coatings for use at 351 nm on the OMEGA EP Laser System (p. 103). A series of ha

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗