Perturbation solutions for low thrust rocket trajectories
Perturbation solutions for equations of motion of vehicle subjected to low thrust acceleration
MOTION EQUATION↗
Engineering topics
Propulsion
Explore propulsion reports from NASA NTRS and DOE OSTI. Search rocket engines, electric propulsion and thrusters; verify designs and performance in the source documents.
Saturn auxiliary solid propulsion applications.
Auxiliary solid propellant motors in Saturn launch vehicle
SATURN LAUNCH VEHICLE↗
Performance and Ranges of Application of Various Types of Aircraft-propulsion System
Explore the source record for details and available documents.
AFTERBURNERS↗
Mars Ascent Vehicle Hybrid Propulsion Effort
Explore the source record for details and available documents.
hybrid rocket↗
Time-Resolved OH-PLIF Assessment of Deflagrations Levels in a CH4-O2 Rotating Detonation Rocket Combustor
The parasitic loss incurred by deflagrative pre-burning is considered to be one of the key challenges to the effective implementation of rotating detonation engine (RDE) systems. Thus far, there have been relatively limited high fidelity, spatio-temporally resolved measurements of the pre-burning process as a function of the reactant conditions and composition within an RDE. In this work, simultaneous high-repetition-rate broadband OH* chemiluminescence and OH planar laser-induced fluorescence (PLIF) imaging are employed to investigate deflagrative burning dynamics in a fully optically accessible CH4-O2 RDE as compared to a H2-air systems under the same conditions. A custom-built optical parametric oscillator (OPO) is coupled with a high-repetition-rate burst-mode laser to generate the 284 nm source for the excitation of the Q1(9) transition of the OH radical. Significant deflagrative burning is observed throughout the chamber as a consequence of the oxygen-rich environment. Trailing wave systems that consume unburned reactants in the region immediately following the primary detonation wave are observed. The formation of a product gas recirculation zone that entrains and combusts incoming reactants is observed, and quantitative analysis is performed to gain valuable insight into deflagration characteristics. At an oxidizer mass flux of Gox ≈ 350kg/m2/s, it is found that the levels of pre-wave burning in CH4-O2 are a factor of ∼2-3 times higher than in H2-air in the region directly ahead of the detonation wave at a global equivalence ratio Φ ≈ 1.0. This study highlights the key roles of ignition delay and turbulent mixing of the combustion product and reactant fields on the levels of pre-burning and establishes a methodology for further investigation, such as for the effects of various RDE inlet configurations.
Propulsion↗
VASIMR{sup R} Interfaced High Temperature Gas-Cooled Fast Reactor for Space Applications
This project was undertaken to assess the feasibility and advantages of utilizing a gas-cooled fast reactor to supply power to an electric propulsion system for deep space exploration to Europa, one of Jupiter's moons. Specifically, the primary objective of this project was to design a 9 MWe gas cooled fast reactor with an accompanying power conversion system to supply electricity to multiple electrically-powered thrusters for a four year mission duration. The thruster design chosen for this analysis is the Variable Specific Impulse Magnetoplasma Rocket (VASIMR). The VASIMR propulsion system, currently being developed by Ad Astra Rocket Company (AARC), is an electric propulsion rocket that uses electric power to accelerate neutral plasma propellant. Advanced electric space propulsion systems such as the VASIMR offer unique capabilities that allow for higher exhaust velocities that are up to ten times that of traditional chemical rockets. Furthermore, the thrust and specific impulse of the VASIMR system can be varied in order to achieve optimal travel times to given destinations for a desired payload. As a result, electric propulsion systems characteristically have lower ratios of system mass to power output than chemical rockets. This ratio is commonly known as the alpha parameter. Alpha parameters of approximately 10 kg/kWe or less make electric propulsion more attractive for deep space exploration missions in terms of resource efficiency and cost. However, the primary challenge with electric propulsion is to develop a high power density source of electricity in order to minimize the total system mass. The alpha parameter is the main benchmark used in this project to test whether or not the proposed coupled gas cooled reactor and power conversion system design is more competitive than other proposed systems. (authors)
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Modeling and Simulation of a Parallel Hybrid-Electric Propulsion System - Electrified Powertrain Flight Demonstration (EPFD) Program
Electrified aircraft propulsion concepts have been proposed to meet aggressive future performance and environmental goals for the next generation of aircraft. However, electrified aircraft present a unique modeling and simulation challenge as they introduce multiple energy sources to the propulsion system, providing various means to meet thrust requirements, compared to conventional gas turbine propulsion architectures where only fuel is available. Additionally, the introduction of an electric powertrain to the existing system enables multiple electrified flight modes to exist (i.e. eTaxi, climb boost, takeoff boost, etc.), further increasing the complexity of the modeling environment. As part of the Electrified Powertrain Flight Demonstration program, this paper presents a modeling and simulation framework for a parallel hybrid-electric propulsion concept using the Environmental Design Space simulation tool. Electrical components are modeled in NPSS, and an overall sizing methodology is introduced. Finally, various operational modes of the electric powertrain are modeled and tested and their impact on key performance parameters is evaluated.
hybrid electric propulsion↗
The National Space Science Data Center guide to international rocket data
Background information is given which briefly describes the mission of the National Space Science Data Center (NSSDC), including its functions and systems, along with its policies and purposes for collecting rocket data. The operation of a machine-sensible rocket information system, which allows the Data Center to have convenient access to information and data concerning all rocket flights carrying scientific experiments, is also described. The central feature of this system, an index of rocket flights maintained on magnetic tape, is described. Standard outputs for NSSDC and for the World Data Center A (WDC-A) for Rockets and Satellites are described.
Dubach, L. L.↗
Analysis of a supersonic-combustion rocket concept
A preliminary analysis has been made of a supersonic-combustion rocket engine concept using hydrogen and oxygen propellants. The ejector action of a separate small rocket motor is employed to pump the propellants to high stagnation pressures and supersonic velocities. Therefore complicated heavy turbopumps are eliminated and cooling problems of a sonic throat are reduced. The results of the study show that vacuum specific impulse levels as high as a conventional rocket having the same chamber pressure as the drive motor are possible. The supersonic-combustion rocket would be an attractive alternate for a high-altitude low-thrust conventional rocket operating with a pressure feed propellant system. It would also be a convenient technique for obtaining extremely high thrusts without the need for developing corresponding large turbopumps.
Franciscus, L. C.↗
Supersonic-combustion rocket
A supersonic combustion rocket is provided in which a small rocket motor is substituted for heavy turbo pumps in a conventional rocket engine. The substitution results in a substantial reduction in rocket engine weight. The flame emanating from the small rocket motor can act to ignite non-hypergolic fuels.
Weber, R. J.↗
Aerodynamic characteristics of a 142-inch diameter solid rocket booster, configuration 139 (SA2FA/SA2FB)
Tests of a 2.112 percent scale model of the space shuttle solid rocket booster model were conducted in a transonic pressure tunnel. Tests were conducted at Mach numbers ranging from 0.4 to 1.2, angles of attack from minus one degree to plus 181 degrees, and Reynolds numbers from 0.6 million to 6.1 million per foot. The model configurations investigated were as follows: (1) solid rocket booster without external protuberances, (2) solid rocket booster with an electrical tunnel and a solid rocket booster/external tank thrust attachment structure, and (3) solid rocket booster with two body strakes.
Radford, W. D.↗
Propulsion technology needs for advanced space transportation systems
Plans are formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems from 1980 to the year 2000. The many possible vehicle applications are reviewed and cataloged to isolate the common threads of primary propulsion technology that satisfies near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Thrust classes of primary propulsion engines that are apparent include: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; and (2) large booster engines of over 250,000 pounds thrust. Major classes of propulsion systems and the important subdivisions of each class are identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements.
Gregory, J. W.↗
Mission applications of electric propulsion
This paper reviews the mission applications of electric propulsion. The energy requirements of candidate high-energy missions gaining in NASA priority are used to highlight the potential of electric propulsion. Mission-propulsion interfaces are examined to point out differences between chemical and electric applications. Brief comparisons between ballistic requirements and capabilities and those of electric propulsion show that electric propulsion is presently the most practical and perhaps the only technology which can accomplish missions with these energy requirements.
Atkins, K. L.↗
Space shuttle solid rocket booster processing and recovery operations at Kennedy Space Center
This paper describes the processing and recovery operations at Kennedy Space Center as applied to the Space Shuttle Solid Rocket Booster. The introductory portion covers the overall Space Shuttle launch vehicle with a description of the Solid Rocket Boosters and explanations of their functions. Processing operations begin with the arrival of the new or refurbished Solid Rocket Motor segments by rail cars from the manufacturer. Segment buildup is performed on the Mobile Launch Platform, and the completed major booster elements are functionally tested prior to their integration with other prime elements that comprise a complete Shuttle launch vehicle. The recovery operations following launch include Solid Rocket Booster separation, parachute deployment, splashdown, and the activities associated with retrieval of the reusable components of the Solid Rocket Boosters. Subsequently, the paper describes the processing required to thoroughly clean the retrieved items, the disassembly activities, and refurbishment steps planned for restoration of the hardware components to usable condition.
Dickinson, W. J.↗
Propulsion technology needs for advanced space transportation systems
Plans have been formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems during the two decades from 1980 to the year 2000. The many possible vehicle applications have been reviewed and cataloged to isolate the common threads of primary propulsion technology that will satisfy near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Two thrust classes of primary propulsion engines are apparent: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; (2) large booster engines of over 250,000 pounds thrust. Six major classes of propulsion systems and the important subdivisions of each class have been identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements of the period.
Gregory, J. W.↗
Status of the NASA YF-12 Propulsion Research Program
The YF-12 research program was initiated to establish a technology base for the design of an efficient propulsion system for supersonic cruise aircraft. The major technology areas under investigation in this program are inlet design analysis, propulsion system steady-state performance, propulsion system dynamic performance, inlet and engine control systems, and airframe/propulsion system interactions. The objectives, technical approach, and status of the YF-12 propulsion program are discussed. Also discussed are the results obtained to date by the NASA Ames, Lewis, and Dryden research centers. The expected technical results and proposed future programs are also given. Propulsion system configurations are shown.
Albers, J. A.↗
Prediction methods for jet V/STOL propulsion aerodynamics
The current status of prediction methods for propulsive flows and propulsion-induced effects which occur on jet V/STOL aircraft is reviewed. Among the major topics studied are flows in propulsive ducts, propulsion-induced ground and thermal effects, aerodynamic loads induced during V/STOL and transition flight, flow vectoring devices, and thrust augmented ejector and lift-fan studies. The current predictive capability in jet V/STOL propulsion aerodynamics is assessed. Future research needs are identified, with particular reference to activities that can improve the usefulness of prediction methods for jet V/STOL aircraft.
Platzer, M. F.↗
A rocket-borne energy spectrometer using multiple solid-state detectors for particle identification
A rocket-borne experiment using energy spectrometers that allows particle identification by the use of multiple solid-state detectors is described. The instrumentation provides information regarding the energy spectrum, pitch-angle distribution, and the type of energetic particles present in the ionosphere. Particle identification was accomplished by considering detector loss mechanisms and their effects on various types of particles. Solid state detectors with gold and aluminum surfaces of several thicknesses were used. The ratios of measured energies for the various detectors were compared against known relationships during ground-based analysis. Pitch-angle information was obtained by using detectors with small geometrical factors mounted with several look angles. Particle flux was recorded as a function of rocket azimuth angle. By considering the rocket azimuth, the rocket precession, and the location of the detectors on the rocket, the pitched angle of the incident particles was derived.
Fries, K. L.↗
Refine your search to explore more results.