RENDEZVOUS AND DOCKING TECHNIQUES

Abstract

To implement the primary space mission of this decade – manned lunar exploration -- the operational assistance of rendezvous and docking is being considered as an alternative to possible problems in obtaining a boost vehicle capable of direct flight. This paper concentrates on the mechanization of the rendezvous and docking phase of such a lunar mission. As indicated in previous papers, rendezvous can take place in either an earth or lunar orbit (or on the lunar surface); it can involve the mating of stages, transfer of fuel, or the return of a shuttle to a “mother” ship; direct ascent or parking orbits can be used; the orbits can be circular or more general ellipses; finally, either or both of the spacecraft can participate in the rendezvous maneuvers. Since there is no intent here to discuss the pros and cons of each approach or to cover all possible mission profiles, guidance schemes and hardware configurations, one particular profile has been selected to display the significant features of most rendezvous missions. In many respects, rendezvous is less difficult than aircraft interception since the target is friendly and there is no severe time constraint. The latter feature allows considerable freedom of design especially with the great versatility of a human in the loop. This remains true even for a purely automatic mode. Perhaps the largest design problem concerns the selection of the mission to be implemented followed by the optimization or systems engineering of a mechanization from the multitude of possible schemes and techniques. A most important factor in the optimization is that of reliability and the redundancy, alternate or backup modes, etc., associated with the approach. While a primary system can be rather easily mechanized with modest equipment requirements, reliability considerations will result in additional hardware, tighter specifications and more safety factors (e. g., propellant margin). This is a very complex area and will only briefly be mentioned in the following discussion.