Liquid Metals for Aerospace Electric-Power Systems

L. Rosenblum

Home/Archive/NASA NTRS

NASA NTRS · 19640000267

Liquid Metals for Aerospace Electric-Power Systems

L. Rosenblum

View original source ↗Export metadata ↓

Abstract

Liquid metals and their properties, as applied to space electric-power systems, are discussed as possible heat-transfer and thermodynamic working fluids. Representative liquid metals—lithium, sodium, potassium, NaK-78, lead, and bismuth — tare discussed and compared. Space power requirements are listed and used as a basis for evaluating the potentialities of the liquid metals.

Explore related subjects

Heat transfer Spacecraft power supply Working fluid Electric propulsion Liquid metal

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

L. Rosenblum. 1963-09-01. Liquid Metals for Aerospace Electric-Power Systems. https://ntrs.nasa.gov/citations/19640000267

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2020

Switchable Wettability for Condensation Heat Transfer

Condensation proceeds as dropwise or filmwise depending on the wettability of the condensing surface. These two modes of condensation have disparate heat transfer coefficients, with dropwise often exceeding filmwise. This work reports a surface with switchable superhydrophilic to hydrophobic wetting behavior that can exhibit both modes of condensation. Relative to the highly-wetting state which yields filmwise condensation, the non-wetting state exhibits dropwise condensation and twice the heat transfer coefficient. Relevance to thermal management is additionally discussed.

Heat transfer↗

NASA NTRS2013

Mid-Pliocene Atlantic Meridional Overturning Circulation Not Unlike Modern

In the Pliocene Model Intercomparison Project (PlioMIP), eight state-of-the-art coupled climate models have simulated the mid-Pliocene warm period (mPWP, 3.264 to 3.025 Ma). Here, we compare the Atlantic Meridional Overturning Circulation (AMOC), northward ocean heat transport and ocean stratification simulated with these models. None of the models participating in PlioMIP simulates a strong mid-Pliocene AMOC as suggested by earlier proxy studies. Rather, there is no consistent increase in AMOC maximum among the PlioMIP models. The only consistent change in AMOC is a shoaling of the overturning cell in the Atlantic, and a reduced influence of North Atlantic Deep Water (NADW) at depth in the basin. Furthermore, the simulated mid-Pliocene Atlantic northward heat transport is similar to the pre-industrial. These simulations demonstrate that the reconstructed high-latitude mid-Pliocene warming can not be explained as a direct response to an intensification of AMOC and concomitant increase in northward ocean heat transport by the Atlantic.

Heat transfer↗

NASA NTRS1988

HOST turbine heat transfer program summary

The objectives of the HOST Turbine Heat Transfer subproject were to obtain a better understanding of the physics of the aerothermodynamic phenomena and to assess and improve the analytical methods used to predict the flow and heat transfer in high temperature gas turbines. At the time the HOST project was initiated, an across-the-board improvement in turbine design technology was needed. A building-block approach was utilized and the research ranged from the study of fundamental phenomena and modeling to experiments in simulated real engine environments. Experimental research accounted for approximately 75 percent of the funding with the remainder going to analytical efforts. A healthy government/industry/university partnership, with industry providing almost half of the research, was created to advance the turbine heat transfer design technology base.

Heat transfer↗