Laser Doppler anemometry

Abstract

The application of laser Doppler anemometry (LDA) to compressible flows is discussed. Specifically, burst-counter and dual-beam LDA systems are addressed. Much has been accomplished with LDA in compressible flows despite the difficulties posed by the high speeds and additionally by the rapid spatial changes in speed or flow direction. The successful application of the technique is difficult because the signal to noise ratios (SNRs) are fairly low even under the best of conditions and highly variable because of variations in particle size and particle location with the sensing volume. The available signal processing is not very effective in discarding signals that are too noisy to provide an accurate velocity measurement. The temptation is to work with particles which are too large to adequately follow the flow but which provide cleaner signals due to increased scattering intensities. For the data to have credibility, some check on the particle response must be made for a given facility and LDA system. The capability, if developed, of being able to determine the size of each particle upon which a measurement is based and the SNR of the corresponding signal burst would be extremely valuable in reducing much of the uncertainty now present in LDA compressible flow measurements.