A Factor Affecting Transonic Leading-edge Flow Separation

Wood, George P; Gooderum, Paul B

Home/Archive/NASA NTRS

NASA NTRS · 19930084569

A Factor Affecting Transonic Leading-edge Flow Separation

Wood, George P·Gooderum, Paul B

View original source ↗Export metadata ↓

Abstract

A change in flow pattern that was observed as the free-stream Mach number was increased in the vicinity of 0.8 was described in NACA Technical Note 1211 by Lindsey, Daley, and Humphreys. The flow on the upper surface behind the leading edge of an airfoil at an angle of attack changed abruptly from detached flow with an extensive region of separation to attached supersonic flow terminated by a shock wave. In the present paper, the consequences of shock-wave - boundary layer interaction are proposed as a factor that may be important in determining the conditions under which the change in flow pattern occurs. Some experimental evidence in support of the importance of this factor is presented.

Explore related subjects

FLOW, TURBULENT FLOW, LAMINAR MACH NUMBER EFFECTS - WING SECTIONS BOUNDARY LAYER - WING SECTIONS FLOW, MIXED

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Wood, George P, Gooderum, Paul B. 1956-10-01. A Factor Affecting Transonic Leading-edge Flow Separation. https://ntrs.nasa.gov/citations/19930084569

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS1957

A discussion of cone and flat-plate Reynolds numbers for equal ratios of the laminar shear to the shear caused by small velocity fluctuations in a laminar boundary layer

By use of the linear theory of boundary-layer stability and Schlichting's formula for the maximum amplification of a disturbance, an approximate relation is derived between the Reynolds number on a cone and the Reynolds number on a flat plate for equal closeness to transition. The indication is that the ratio of the cone Reynolds number for transition, based on the distance to the cone apex, to the plate Reynolds number for transition, based on the distance to the leading edge, is not in general equal to 3, as has been suggested by other investigators, but varies from 3 when transition occurs at the minimum critical Reynolds number to unity when transition occurs at a large multiple of the critical Reynolds number.

FLOW, TURBULENT↗

NASA NTRS1955

A method of quadrature for calculation of the laminar and turbulent boundary layer in case of plane and rotationally symmetrical flow

For calculation of the characteristic parameters of the boundary layer (momentum-loss thickness and form parameter for the velocity profile), two quadrature formulas are given which are valid for the laminar as well as for the turbulent state of flow. These formulas cover both the two-dimensional and the rotationally symmetrical case. The calculation of the momentum-loss thickness is carried out by a simple integration of the energy theorem. The equation for the form parameter is obtained by coupling of the momentum theorem with the energy theorem. Knowledge of the derivatives of the velocity distribution and of the radius of the body along the length x is not necessary.

FLOW, TURBULENT↗

NASA NTRS1954

Characteristics of turbulence in a boundary layer with zero pressure gradient

The results of an experimental investigation of a turbulent boundary layer with zero pressure gradient are presented. Measurements with the hot-wire anemometer were made of turbulent energy and turbulent shear stress, probability density and flattening factor of u-fluctuation, spectra of turbulent energy and shear stress, and turbulent dissipation. The importance of the region near the wall and the inadequacy of the concept of local isotropy are demonstrated. Attention is given to the energy balance and the intermittent character of the outer region of the boundary layer. Also several interesting features of the spectral distribution of the turbulent motions are discussed.

FLOW, TURBULENT↗