Search NASA⌕ Search

NASA NTRS · 19950039356

Microwave backscattering and emission model for grass canopies

Abstract

Microwave radar and radiometer measurements of grasslands indicate a substantial reduction in sensor sensitivity to soil moisture in the presence of a thatch layer. When this layer is wet it masks changes in the underlying soil, making the canopy appear warm in the case of passive sensors (radiometer) and decreasing backscatter in the active case (scatterometer). A model for a grass canopy with thatch will be presented in this paper to explain this behavior and to compare with observations. The canopy model consists of three layers: grass, thatch, and the underlying soil. The grass blades are modeled by elongated elliptical discs and the thatch is modeled as a collection of disk shaped water droplets (i.e., the dry matter is neglected). The ground is homogeneous and flat. The distorted Born approximation is used to compute the radar cross section of this three layer canopy and the emissivity is computed from the radar cross section using the Peake formulation for the passive problem. Results are computed at L-band (1.4 GHz) and C-band (4.75 GHz) using canopy parameters (i.e., plant geometry, soil moisture, plant moisture, etc.) representative of Konza Prairie grasslands. The results are compared to C-band scatterometer measurements and L-band radiometer measurements at these grasslands.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Saatchi, Sasan S., Levine, David M., Lang, Roger H.. 1994-01-01. Microwave backscattering and emission model for grass canopies. https://ntrs.nasa.gov/citations/19950039356

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

On the modeling and optimization of Schottky varactor frequency multipliers at submillimeter wavelengths

Schottky varactor frequency multipliers are used to generate local oscillator power at millimeter and submillimeter wavelengths. The equivalent circuit of the Schottky varactor contains a junction capacitance, a junction conductance, a series resistance and a model for electron velocity saturation. A millimeter wavelengths the equivalent circuits is affected by the edge effects, which are due to the small-area circular anode. The correction factors due to the edge effect for the junction capacitance and for the series resistance are available in the literature. In this work the electron velocity saturation is modeled by limiting the velocity of the transition front between the depleted and undepleted layer. By using this model the maximum current of the diode is given by the actual area of the transition front between depleted and undepleted layers, and is therefore related to the capacitance correction factor. The new model has been tested by analyzing a two diode balanced doubler for 160 GHz presented earlier in the literature. The agreement between the theoretical results and the measurements is excellent. The new diode model is useful in optimization of varactors for high millimeter and submillimeter wave frequencies.

TRT-THEORETICAL↗

Van Driest transformation and compressible wall-bounded flows

The transformation validity question utilizing resulting data from direct numerical simulations (DNS) of supersonic, isothermal cold wall channel flow was investigated. The DNS results stood for a wide scope of parameter and were suitable for the purpose of examining the generality of Van Driest transformation. The Van Driest law of the wall can be obtained from the inner-layer similarity arguments. It was demonstrated that the Van Driest transformation cannot be incorporated to collapse the sublayer and log-layer velocity profiles simultaneously. Velocity and temperature predictions according to the preceding composite mixing-length model were presented. Despite satisfactory congruity with the DNS data, the model must be perceived as an engineering guide and not as a rigorous analysis.

TRT-THEORETICAL↗

Parallel implicit unstructured grid Euler solvers

A mesh-vertex finite volume scheme for solving the Euler equations on triangular unstructured meshes is implemented on a multiple-instruction/multiple-data stream parallel computer. An explicit four-stage Runge-Kutta scheme is used to solve two-dimensional flow problems. A family of implicit schemes is also developed to solve these problems, where the linear system that arises at each time step is solved by a preconditioned GMRES algorithm. Two partitioning strategies are employed: one that partitions triangles and the other that partitions vertices. The choice of the preconditioner in a distributed memory setting is discussed. All of the methods are compared both in terms of elapsed times and convergence rates. It is shown that the implicit schemes offer adequate parallelism at the expense of minimal sequential overhead. The use of a global coarse grid to further minimize this overhead is also investigated. The schemes are implemented on a distributed memory parallel computer, the Intel iPSC/860.

TRT-THEORETICAL↗