NASA NTRS2006
Reflectarrays combines key features of large reflectors and phased array elements to generate a collimated beam as required in high gain antennas. In reflectarrays, a large flat reflecting surface with many resonant patch elements is illuminated by a feed (or by a feed/subreflector in dual reflector configuration). In many space applications, reflectarrays applications can be advantageous because their large surface can be folded or rolled as a part of spacecraft payload before being deployed. Consequently, a reflectarray can significantly reduce both volume and mass requirements in space deployment. To optimize reflectarray antenna performance, a phase correction mechanism must be applied to its individual array elements some of which are well documented in the literatures. In this study, we attempt to extend analytical techniques in reflector analysis to reflectarrays by introducing a number of approaches to estimate the reflectarray antenna performance independent of its phase compensation mechanism. In one approach, a Physical Optics (PO) current will be assigned to the surface of individual reflectarray elements upon which a phase correction will be applied. In the second approach, a transmit/receive (TX/RX) radiation characteristics will be assigned to individual reflectarray elements from which coupling coefficients will be calculated and assigned as the excitation coefficient of individual elements. PO approach is modeled in the UCLA reflector code while coupling (TX/RX) method is implemented in both UCLA code as well as TICRA (GRASP) software. Results are presented for single and dual configurations with the main reflector as a reflectarray. The approach described is used to design a 3-m Cassegrain offset-fed configuration for dual X/Ka-bands application.