Search NASA⌕ Search
Home/Archive/NASA NTRS

NASA NTRS · 20060043853

Spitzer Space Telescope mission design

Kwok, Johnny H.·Garcia, Mark D.·Bonfiglio, Eugene·Long, Stacia M.
View original source ↗Export metadata ↓

Abstract

This paper gives a description of the mission design, launch, orbit, and navigation results for the Spitzer space telescope mission. The Spitzer telescope was launched by the Delta II Heavy launch vehicle into a heliocentric Earth trailing orbit. This orbit is flown for the first time and will be used by several future astronomical missions such as Kepler, SIM, and LISA. This paper describes the launch strategy for a winter versus a summer launch and how it affects communications. It also describes how the solar orbit affects the design and operations of the Observatory. It describes the actual launch timeline, launch vehicle flight performance, and the long term behavior of the as flown orbit. It also provides the orbit knowledge from in-flight navigation data.

Explore related subjects

Mission DesignEarth trailing orbitsolar orbitSpace Infrared Telescope Facility (SIRTF)Spitzer

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kwok, Johnny H., Garcia, Mark D., Bonfiglio, Eugene, Long, Stacia M.. 2004-06-21. Spitzer Space Telescope mission design. https://ntrs.nasa.gov/citations/20060043853

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2019

Mars Small-Spacecraft Human Exploration Resource Prospector with Aero-braking (SHERPA): Demonstrating an End-to-End Mission to Phobos Distant Retrograde Orbit

This paper summarizes an end-to-end mission design concept exploring the feasibility of using small satellites together with aero-capture technology to achieve Mars orbit insertion, and subsequent injection into a Phobos-stabilized (or distant retrograde) orbit. The science and mission objectives are to carry out a survey of the mineralogy and morphology of Phobos, to answer basic questions concerning its origin and formation, to test the cohesiveness of Phobos regolith, and to search for potential landing sites for future human or robotic spacecraft. The Mars Small-Spacecraft Human Exploration Resource Prospector with Aero-braking (SHERPA) spacecraft is based on a combination flight-tested prototype vehicle and instruments, and first principle sizing of consumables. The resulting system is fitted with an inflatable aerodynamic decelerator to effect aero-capture into a Mars elliptical orbit, on its way to achieving Phobos orbit. A computational fluid dynamics tool is used to analyze the flow-field and identify potential hot spots during aerodynamic flight. This work advocates for the use of small satellites to test out technologies and operational concepts used in sustained human exploration of Mars, and to carry out scientific exploration of the Mars system. Consistent with a systems engineering approach, this work combines elements of the NASA Human Exploration and Operations Mission Directorate, the Space Technology Mission Directorate, and the Science Mission Directorate, and proposes a scenario for science acquisition, technology verification, trajectory validation, and in-situ resource exploration. We believe these type of missions are essential forerunners to human crewed missions to Mars.

Mission Design↗
NASA NTRS2017

Results of the Apogee-Raising Campaign of the Magnetospheric Multiscale Mission

This paper describes the apogee-raising campaign of the Magnetospheric Multiscale mission, where the spacecraft increased their apogee radii from 12 to 25 Earth radii in a total of 98 maneuvers. These maneuvers included an initial formation resize set to spread the spacecraft apart for safety, 32 apogee-raise delta-v maneuvers, their associated slews, four perigee-raise maneuvers and the associated slews, and finally a set of maneuvers to get back into formation. These activities were all accomplished successfully and on schedule with no anomalies, and at a fuel consumption somewhat less than predicted. As a result, MMS was set up ready to carry out in situ studies of magnetic reconnection in the magnetotail, with sufficient fuel remaining for a significant extended mission.

Mission Design↗
NASA NTRS2017

Towards the Development of a Global, Satellite-based, Terrestrial Snow Mission Planning Tool

A global, satellite-based, terrestrial snow mission planning tool is proposed to help inform experimental mission design with relevance to snow depth and snow water equivalent (SWE). The idea leverages the capabilities of NASAs Land Information System (LIS) and the Tradespace Analysis Tool for Constellations (TAT C) to harness the information content of Earth science mission data across a suite of hypothetical sensor designs, orbital configurations, data assimilation algorithms, and optimization and uncertainty techniques, including cost estimates and risk assessments of each hypothetical orbital configuration.One objective the proposed observing system simulation experiment (OSSE) is to assess the complementary or perhaps contradictory information content derived from the simultaneous collection of passive microwave (radiometer), active microwave (radar), and LIDAR observations from space-based platforms. The integrated system will enable a true end-to-end OSSE that can help quantify the value of observations based on their utility towards both scientific research and applications as well as to better guide future mission design. Science and mission planning questions addressed as part of this concept include:1. What observational records are needed (in space and time) to maximize terrestrial snow experimental utility?2. How might observations be coordinated (in space and time) to maximize utility? 3. What is the additional utility associated with an additional observation?4. How can future mission costs being minimized while ensuring Science requirements are fulfilled?

Mission Design↗