Very High Isp Thruster with Anode Layer (VHITAL): An Overview

Marrese-Reading, Colleen M.; Frisbee, Robert; Sengupta, Anita; Cappelli, Mark A.; Tverdoklebov, Sergey; Semenkin, Sasha; Boyd, Iain

NASA NTRS · 20070034956

Very High Isp Thruster with Anode Layer (VHITAL): An Overview

Marrese-Reading, Colleen M.·Frisbee, Robert·Sengupta, Anita·Cappelli, Mark A.·Tverdoklebov, Sergey·Semenkin, Sasha·Boyd, Iain

View original source ↗Export metadata ↓

Abstract

This article describes the two stage bismuth fueled Hall thruster technology that was developed at TsNIIMASH [1] and the Very High Isp Thruster with Anode Layer (VHITAL) technology assessment program that is funded by NASA Exploration Systems Mission Directorate (ESMD)' Prometheus program. The overall objective of this program is to evaluate the potential for this Russian-developed thruster technology to enable near-term, Nuclear Electric Propulsion (NEf)-enabled ESMD missions to the outer planets. This 2.5 year program will provide the technology basis for the development of even higher power anode layer thrusters for rapid outer planet exploration missions and, ultimately, human exploration of the solar system. The first 6 month phase is currently in progress. If this phase is successful, the second (1 year) and third (1 year) phase of the proposed program will follow.

Explore related subjects

Hall thrusters bismuth

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Marrese-Reading, Colleen M., Frisbee, Robert, Sengupta, Anita, Cappelli, Mark A., Tverdoklebov, Sergey, Semenkin, Sasha, Boyd, Iain. 2004-09-28. Very High Isp Thruster with Anode Layer (VHITAL): An Overview. https://ntrs.nasa.gov/citations/20070034956

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2019

Variation in Ion Acceleration Characteristics of the HERMeS Hall Thruster During Magnetic Optimization

To reduce design risks for future magnetically shielded Hall thrusters, a test was performed on the HERMeS to obtain data for optimizing the effect of magnetic shielding. As a part of this test, laser-induced fluorescence velocimetry was used to characterize the variations in the ion acceleration with different magnetic configurations. Four magnetic configurations representing varying amounts of magnetic shielding between the high-energy discharge plasma and the discharge channel walls were tested. The ion velocity data points to the possibility that different plasma-wall interaction physics applies to a magnetically shielded thruster than a non-shielded thruster. The transition point is very prominent and can potentially be used to test whether a thruster is fully magnetically shielded.

Hall thrusters↗

NASA NTRS2017

Design and Testing of a Hall Effect Thruster with 3D Printed Channel and Propellant Distributor

The UAH-78AM is a low-power Hall effect thruster developed at the University of Alabama in Huntsville with channel walls and a propellant distributor manufactured using 3D printing. The goal of this project is to assess the feasibility of using unconventional materials to produce a low-cost functioning Hall effect thruster and consider how additive manufacturing can expand the design space and provide other benefits. A version of the thruster was tested at NASA Glenn Research Center to obtain performance metrics and to validate the ability of the thruster to produce thrust and sustain a discharge. An overview of the thruster design and transient performance measurements are presented here. Measured thrust ranged from 17.2 millinewtons to 30.4 millinewtons over a discharge power of 280 watts to 520 watts with an anode I (sub SP)(Specific Impulse) range of 870 seconds to 1450 seconds. Temperature limitations of materials used for the channel walls and propellant distributor limit the ability to run the thruster at thermal steady-state.

Hall thrusters↗

NASA NTRSDate not supplied

Development Of 12 Kw Hall Thrusters for Nasa Lunar Gateway Power And Propulsion Element

NASA is embarking on a new and exciting era of human exploration to the Moon and its vicinity. As part of the Artemis program, NASA is developing the lunar Gateway, an orbiting platform in Near Rectilinear Halo Orbit (NRHO) about the Moon. The first two elements of the Gateway will be launched in 2024 and will be transferred from a high Earth orbit to the NRHO via the use of Solar Electric Propulsion (SEP). The SEP system is located on the Power and Propulsion Element (PPE) which will provide up to 60 kW of power. Aerojet Rocketdyne is developing the 12 kW flight Hall thrusters to be used for transferring the PPE and the Habitat and Logistics Outpost (HALO) module to NRHO. Work is continuing on the development testing, and these results will be described in the paper. The project has also recently completed its critical design review and is transitioning to the fabrication of the three flight thrusters. The 12 kW Hall thrusters are being developed under the NASA Advanced Electric Propulsion System (AEPS) program. As part of the AEPS program, AR built two Engineering Test Unit (ETU) Hall thrusters based on the NASA HERMeS engine and conducted a series of tests to validate the design. One series of tests focused on environments and functional testing, while the other series was mainly focused on long duration test blocks. Results from these tests were used to compare with NASA data from the HERMeS thruster. The comparison of the test results showed no change to the critical performance and lifetime parameters, which enabled the next phase of the program to proceed. Currently testing is continuing on the Engineering Development Units (EDU) as part of the flight qualification activities. The successful completion of the CDR serves as the starting point for the flight thruster fabrication, which is now underway to support the launch of the Gateway modules in 2024. The development and qualification of the AEPS 12 kW Hall thrusters is proceeding well. As the program completes CDR and transitions into flight builds of the three 12 kW Hall thrusters that will be used to transfer the combined PPE and HALO stack to the NRHO, the results of the development testing are reviewed in this presentation, and a status of the program and future plans is provided. The launch of the two Gateway modules and the transfer of this large payload to cislunar orbit will mark a significant milestone in electric propulsion, as it will demonstrate the ability of SEP to transfer very large payloads over great distances. This establishes the precedent that could lead to cargo transfers from the Earth to the Moon or even to Mars using SEP.

Hall thrusters↗