NASA NTRS2024
Direct Energy Deposition (DED) is an emerging technology extensively employed in metal Additive Manufacturing (AM). Despite its widespread industrial application, mathematical modeling in this domain remains challenging. This complexity arises from the intricate nature of the modeling approach and the nonlinear behavior of material parameters across a broad temperature range. Consequently, experimentalists often resort to a trial-and-error method to achieve structures with desired properties. However, this approach can be time-consuming and may not always yield parts with the requisite characteristics, highlighting the necessity for mathematical modeling to enhance manufacturing success. This study focuses on thin-walled manufacturing with a single bead thickness, adjusting laser parameters to produce such structures. The laser cladding speed, typical for DED manufacturing, is considered to be on the order of centimeters per second. The various wall thicknesses and heights are explored to discern the general characteristics of walls manufactured via this DED approach. Our modeling approach diverges from the conventional DED modeling based on activation-deactivation of predefined mesh domains, commonly implemented in many finite element codes. Instead, a method is proposed that effectively models layer cladding and melt pool dynamics, enabling predictions of the microstructure in the resulting structures. The formation mechanisms of cellular, dendritic columnar, and stray (equiaxed) grains, which arise from the interplay between nucleation and growth from the surface is analyzed. The study also examines the feasibility of microstructure formation to demonstrate the various thermal characteristics inherent in wall manufacturing. Our results illustrate how different process parameters influence the temperature gradient and cooling rate of the molten pool, subsequently affecting the primary dendrite arm spacing (PDAS). This modeling technique allows for the investigation of diverse thermal conditions, facilitating the prediction of microstructure and residual stresses in the manufactured parts.