NASA NTRS · 20130010669
No abstract available
Explore connections, maps & timelines
Reder, Leonard, Day, John, Ingham, Mitch, Murray, Richard, Williams, Brian. 2012-07-30. Engineering Resilient Space Systems: Introduction to Short Course. https://ntrs.nasa.gov/citations/20130010669
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
This presentation is overview of the X-57 structural design requirements for the propeller systems and power systems, modifications to the existing Tecnam aircraft, and as well as the structural airworthiness process which includes the analysis and ground testing of the composite wing.'
State-of-the-art instrumentation techniques have provided an opportunity to obtain greater insight into structural wing loads during flight. An investigation was undertaken to research new wing instrumentation and load sensing techniques for measuring accurate in-flight spanwise load distributions on wing structures. A straight tapered wing was instrumented with both conventional foil strain gages at five spanwise wing stations and fiber optic strain sensors at every half inch along the entire wing span. Thirty-nine unique load cases were applied to the wing lower surface using hydraulic actuators to obtain various shear, bending moment, and torque load distributions on the wing. This paper will highlight three load calibration approaches. Conventional linear regression calibration methods were applied to foil strain gages providing a single wing station vertical shear, bending moment, and torque load. Linear regression methods were applied to a fiber optic sensing system to provide bending moment and torque spanwise load distributions. A load sensing scheme using strain derived wing shape information derived from a single load case provided vertical shear and bending moment spanwise load distribution information. Aspects of the three different approaches will be compared and contrasted to inform the reader of the benefits or disadvantages of each. Instrument installation, sensor characteristics, test execution aspects, and recommended calibration techniques will be discussed.
This presentation engages other users in the shared technology of laser scanning.