Search NASA⌕ Search

NASA NTRS · 20140010149

Evolving Systems: Nonlinear Adaptive Key Component Control with Persistent Disturbance Rejection

Abstract

This paper presents an introduction to Evolving Systems, which are autonomously controlled subsystems that self-assemble into a new Evolved System with a higher purpose. Evolving Systems of aerospace structures often require additional control when assembling to maintain stability during the entire evolution process. This is the concept of Adaptive Key Component Control which operates through one specific component to maintain stability during the evolution. In addition this control must overcome persistent disturbances that occur while the evolution is in progress. We present theoretical results for the successful operation of Nonlinear Adaptive Key Component control in the presence of such disturbances and an illustrative example.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Balas, Mark J., Frost, Susan A.. 2013-08-12. Evolving Systems: Nonlinear Adaptive Key Component Control with Persistent Disturbance Rejection. https://ntrs.nasa.gov/citations/20140010149

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

An Adaptive Virtual Oscillator Control Structure for Grid-Forming Inverters

The electrical grid is facing unprecedented challenges due to the increasing penetration of inverter-based resources. Grid forming inverters (GFMIs) are a promising technology to address these challenges. Recently, the virtual oscillator based GFMI control is attracting more attention due to its superior performance over other control strategies. In this article, an adaptive control strategy is proposed to provide flexible operation and transition between grid-connected and islanded modes. The controller adapts the virtual oscillator's parameter values depending on the operation mode. It also provides a feedback signal using a measured frequency to account for any steady-state errors and to allow a seamless transition from grid-connected to islanded mode. Finally, to show the feasibility of the proposed controller, this article discusses the simulation results from the implementation of the controller on a single inverter system and on a group of inverters on a large practical utility feeder, the IEEE 13 node feeder, using the DIgSILENT simulation environment.

adaptive control↗

Adaptive Individual Blade Pitch Control of an Ocean Current Turbine for Load Reduction

A Direct Adaptive Disturbance Rejection (DADR) control algorithm is evaluated using a numer-ical simulation of an Ocean Current Turbine (OCT) for its ability to minimize the cyclic loadings on the rotor blades caused by current shear. This control algorithm reduces these cyclic loadings by individually altering the pitch angles of the rotor blades as a function of rotor rotation angle. The OCT numerical model represents a system with a single 3 bladed 20 meter diameter rotor operated in the Gulf Stream off the coast of Ft. Lauderdale, Florida for mean and maximum measured current shear values of 0.004 and 0.03 (m/s)/m. The results indicate that the adaptive controller reduced the amplitude of the cyclic axial blade loads on a rigidly mounted and moored turbine by 91.18% and 92.3% in the mean current shear and by 94.12% and 81.88% in maximum current shear demonstrating the value of this controls approach.

adaptive control↗