Search NASA⌕ Search
Home/Archive/NASA NTRS

NASA NTRS · 20140013047

Performance Simulations for a Spaceborne Methane Lidar Mission

Kiemle, C.·Kawa, Stephan Randolph·Quatrevalet, Mathieu·Browell, Edward V.
View original source ↗Export metadata ↓

Abstract

Future spaceborne lidar measurements of key anthropogenic greenhouse gases are expected to close current observational gaps particularly over remote, polar, and aerosol-contaminated regions, where actual in situ and passive remote sensing observation techniques have difficulties. For methane, a "Methane Remote Lidar Mission" was proposed by Deutsches Zentrum fuer Luft- und Raumfahrt and Centre National d'Etudes Spatiales in the frame of a German-French climate monitoring initiative. Simulations assess the performance of this mission with the help of Moderate Resolution Imaging Spectroradiometer and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations of the earth's surface albedo and atmospheric optical depth. These are key environmental parameters for integrated path differential absorption lidar which uses the surface backscatter to measure the total atmospheric methane column. Results showthat a lidar with an average optical power of 0.45W at 1.6 μm wavelength and a telescope diameter of 0.55 m, installed on a low Earth orbit platform(506 km), will measure methane columns at precisions of 1.2%, 1.7%, and 2.1% over land, water, and snow or ice surfaces, respectively, for monthly aggregated measurement samples within areas of 50 × 50 km2. Globally, the mean precision for the simulated year 2007 is 1.6%, with a standard deviation of 0.7%. At high latitudes, a lower reflectance due to snow and ice is compensated by denser measurements, owing to the orbital pattern. Over key methane source regions such as densely populated areas, boreal and tropical wetlands, or permafrost, our simulations show that the measurement precision will be between 1 and 2%.

Explore related subjects

methanelidar remote sensingMERLIN

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kiemle, C., Kawa, Stephan Randolph, Quatrevalet, Mathieu, Browell, Edward V.. 2014-04-16. Performance Simulations for a Spaceborne Methane Lidar Mission. https://ntrs.nasa.gov/citations/20140013047

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2017

Development of Augmented Spark Impinging Igniter System for Methane Engines

The Lunar Cargo Transportation and Landing by Soft Touchdown (Lunar CATALYST) program is establishing multiple no-funds-exchanged Space Act Agreement (SAA) partnerships with U.S. private sector entities. The purpose of this program is to encourage the development of robotic lunar landers that can be integrated with U.S. commercial launch capabilities to deliver payloads to the lunar surface. As part of the efforts in Lander Technologies, NASA Marshall Space Flight Center (MSFC) is developing liquid oxygen (LOX) and liquid methane (LCH4) engine technology to share with the Lunar CATALYST partners. Liquid oxygen and liquid methane propellants are attractive owing to their relatively high specific impulse for chemical propulsion systems, modest storage requirements, and adaptability to NASA's Journey to Mars plans. Methane has also been viewed as a possible propellant choice for lunar missions, owing to the performance benefits and as a technology development stepping stone to Martian missions. However, in the development of methane propulsion, methane ignition has historically been viewed as a high risk area in the development of such an engine. A great deal of work has been conducted in the past decade devoted to risk reduction in LOX/CH4 ignition. This paper will review and summarize the history and results of LOX/CH4 ignition programs conducted at NASA. More recently, a NASA-developed Augmented Spark Impinging (ASI) igniter body, which utilizes a conventional spark exciter system, is being tested with LOX/CH4 to help support internal and commercial engine development programs, such as those in Lunar CATALYST. One challenge with spark exciter systems, especially at altitude conditions, is the ignition lead that transmits the high voltage pulse from the exciter to the spark igniter (spark plug). The ignition lead can be prone to corona discharge, reducing the energy delivered by the spark and potentially causing non-ignition events. For the current work, a commercial compact exciter system, which eliminates this high voltage cabling, was tested at altitude conditions. A modified, conventional exciter system with an improved ignition lead was also recently tested at altitude conditions. This test program demonstrated the capability of these exciter systems to operate at altitude. While more extensive testing may be required, these systems or similar ones may be used for future NASA and commercial engine programs.

methane↗
NASA NTRS2016

Bladed Terrain on Pluto: Possible Origins and Evolutions

Pluto's Bladed Terrain (centered roughly 20 deg N, 225 deg E) covers the flanks and crests of the informally named Tartarus Dorsa with numerous roughly aligned blade-like ridges oriented approx. North-South; it may also stretch considerably farther east onto the non-close approach hemisphere but that inference is tentative. Individual ridges are typically several hundred meters high, and are spaced 5 to 10 km crest to crest, separated by V-shaped valleys. Many ridges merge at acute angles to form Y-shape junctions in plan view. The principle composition of the blades themselves we suspect is methane or a methane-rich mixture. (Methane is spectroscopically strongly observed on the optical surfaces of blades.) Nitrogen ice is very probably too soft to support their topography. Cemented mixtures of volatile and non-volatile ices may also provide a degradable but relief supporting "bedrock" for the blades, perhaps analogous to Callisto. Currently we are considering several hypotheses for the origins of the deposit from which Bladed Terrain has evolved, including aeolian disposition, atmospheric condensation, updoming and exhumation, volcanic intrusions or extrusions, crystal growth, among others. We are reviewing several processes as candidate creators or sculptors of the blades. Perhaps they are primary depositional patterns such as dunes, or differential condensation patterns (like on Callisto), or fissure extrusions. Or alternatively perhaps they are the consequence of differential erosion (such as sublimation erosion widening and deepening along cracks), variations in substrate properties, mass wasting into the subsurface, or sculpted by a combination of directional winds and solar isolation orientation. We will consider the roles of the long-term increasing solar flux and short periods of warm thick atmospheres. Hypotheses will be ordered based on observational constrains and modeling to be presented at the conference.

methane↗