NASA NTRS · 20150010754
2D Electrostatic Actuation of Microshutter Arrays
Abstract
An electrostatically actuated microshutter array consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutter arrays demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Burns, Devin E., Oh, Lance H., Li, Mary J., Jones, Justin S., Kelly, Daniel P., Zheng, Yun, Kutyrev, Alexander S., Moseley, Samuel H.. 2015-05-31. 2D Electrostatic Actuation of Microshutter Arrays. https://ntrs.nasa.gov/citations/20150010754
Cite the original work for its findings. Save a collection to share your selection of sources.