Search NASA⌕ Search

NASA NTRS · 20150014584

VIIRS-J1 Polarization Narrative

Abstract

The VIS/NIR bands polarization sensitivity of Joint Polar Satellite Sensor 1 (JPSS1) Visible/Infrared Imaging Radiometer Suite (VIIRS) instrument was measured using a broadband source. While polarization sensitivity for bands M5-M7, I1, and I2 was less than 2.5%, the maximum polarization sensitivity for bands M1, M2, M3, and M4 was measured to be 6.4%, 4.4%, 3.1%, and 4.3%, respectively with a polarization characterization uncertainty of less than 0.3%. A detailed polarization model indicated that the large polarization sensitivity observed in the M1 to M4 bands was mainly due to the large polarization sensitivity introduced at the leading and trailing edges of the newly manufactured VISNIR bandpass focal plane filters installed in front of the VISNIR detectors. This was confirmed by polarization measurements of bands M1 and M4 bands using monochromatic light. Discussed are the activities leading up to and including the instruments two polarization tests, some discussion of the polarization model and the model results, the role of the focal plane filters, the polarization testing of the Aft-Optics-Assembly, the testing of the polarizers at Goddard and NIST and the use of NIST's T-SIRCUS for polarization testing and associated analyses and results.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Waluschka, Eugene, McCorkel, Joel, McIntire, Jeff, Moyer, David, McAndrew, Brendan, Brown, Steven W., Lykke, Keith, Butler, James, Meister, Gerhard, Thome, Kurtis J.. 2015-08-09. VIIRS-J1 Polarization Narrative. https://ntrs.nasa.gov/citations/20150014584

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Evaluation of Systematic Errors on Polarization Parameters from POLDER Instrument Data for Use In CLARREO Pathfinder-VIIRS Intercalibration

One of the CLARREO Pathfinder (CPF) mission’s science objectives is to intercalibrate the reflective solar bands of the NOAA-20 VIIRS instrument against high-accuracy CPF measurements utilizing coincident, co-angled, and co-located footprints acquired over diverse Earth targets. To alleviate the effect of high polarization sensitivity of select VIIRS channels on intercalibration analysis, the CPF team will limit the intercalibration footprints over low-polarized scene types, which will be identified based on an empirical estimation of their degree and angle of polarization (DOP and AOP) using POLDER data. This paper describes the methodology for evaluating systematic errors in the estimation of DOP and AOP for Earth-reflected radiances using POLDER’s polarized bands and investigates their potential impact on CPF-VIIRS intercalibration uncertainty. The systematic errors were found to be less than 0.01 for DOP and less than 2.2 deg. for AOP, which will have a negligible impact on CPF-VIIRS intercalibration uncertainty.

polarization↗

X-Ray Spectro-Polarimetry with Photoelectric Polarimeters

We derive a generalization of forward fitting for X-ray spectroscopy to include linear polarization of X-ray sources, appropriate for the anticipated next generation of space-based photoelectric polarimeters. We show that the inclusion of polarization sensitivity requires joint fitting to three observed spectra, one for each of the Stokes parameters, I(E), U(E), and Q(E). The equations for StokesI (E) (the total intensity spectrum) are identical to the familiar case with no polarization sensitivity, and for which the model-predicted spectrum is obtained by a convolution of the source spectrum, F (E), with the familiar energy response function,(E) R(E,E), where (E) and R(E,E) are the effective area and energy redistribution matrix, respectively. In addition to the energy spectrum, the two new relations for U(E) and Q(E) include the source polarization fraction and position angle versus energy, a(E), and 0(E), respectively, and the model-predicted spectra for these relations are obtained by a convolution with the modulated energy response function, (E)(E) R(E,E), where(E) is the energy-dependent modulation fraction that quantifies a polarimeters angular response to 100 polarized radiation. We present results of simulations with response parameters appropriate for the proposed PRAXyS Small Explorer observatory to illustrate the procedures and methods, and we discuss some aspects of photoelectric polarimeters with relevance to understanding their calibration and operation.

polarization↗

Accuracy of RT Code SORD for Realistic Atmospheric Profiles

We discuss accuracy of our recently developed RT code SORD using 2 benchmark scenarios published by the IPRT group in 2015. These scenarios define atmospheres with a complicate dependence of scattering and absorption properties over height (profile). Equal step, dh=1km, is assumed in the profiles. We developed subroutines that split such atmospheres into layers of the same optical thickness, d tau. We provide full text of the subroutines with comments in Appendix. The d tau is a step for vertical integration in the method of successive orders. Modification of the input profiles from "equal step over h" to "equal step over tau" changes input for RT simulations. This may cause errors at or above the acceptable level of the measurement uncertainty. We show errors of the RT code SORD for both intensity and polarization. In addition to that, using our discrete ordinates RT code IPOL, we discuss one more IPRT scenario, in which changes in height profile indeed cause unacceptable errors. Clear understanding of source and magnitude of these errors is important, e.g. for the AERONET retrieval algorithm. SORD is available from ftp://maiac.gsfc.nasa.gov/pub/skorkin/SORD_IP_16B/ or by email request from the first author.

polarization↗