Search NASA⌕ Search

NASA NTRS · 20190027535

Robotic Refueling Mission 3: Cryogenic Demonstration Subsystem Operations

Abstract

The Robotic Refueling Mission 3 (RRM3) payload was installed on the International Space Station (ISS) in December 2018. Its Cryogenic Demonstation Subsystem (CDS) was loaded with 19 kilograms of liquid methane, for demonstration of on-orbit storage and transfer. We provide a short description of the design and ground testing of the CDS, and then discuss the on-orbit operations through the first half of 2019.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Boyle, Rob, Breon, Susan, Francom, Matt, Delee, Hudson, Francis, John, Mustafi, Shuvo, Barfknecht, Pete, McGuire, Jill, Krenn, Angela, Zimmerli, Greg, Hauser, Dan. 2019-07-18. Robotic Refueling Mission 3: Cryogenic Demonstration Subsystem Operations. https://ntrs.nasa.gov/citations/20190027535

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Comparison of Computational Results with a Low-g, Nitrogen Slosh and Boiling Experiment

This paper compares a fluid/thermal simulation, in Fluent, with a low-g, nitrogen slosh and boiling experiment. In 2010, the French Space Agency, CNES, performed cryogenic nitrogen experiments in a low-g aircraft campaign. From one parabolic flight, a low-g interval was simulated that focuses on low-g motion of nitrogen liquid and vapor with significant condensation, evaporation, and boiling. The computational results are compared with high-speed video, pressure data, heat transfer, and temperature data from sensors on the axis of the cylindrically shaped tank. These experimental and computational results compare favorably. The initial temperature stratification is in good agreement, and the two-phase fluid motion is qualitatively captured. Temperature data is matched except that the temperature sensors are unable to capture fast temperature transients when the sensors move from wet to dry (liquid to vapor) operation. Pressure evolution is approximately captured, but condensation and evaporation rate modeling and prediction need further theoretical analysis.

Cryogenic Fluid Storage↗