Search NASA⌕ Search
Home/Archive/NASA NTRS

NASA NTRS · 20205003059

Third Sonic Boom Prediction Workshop Cases: Analysis Using the NASA PCBoom

Joel B Lonzaga
View original source ↗Export metadata ↓

Abstract

This paper presents simulation results and analyses using the test cases provided for the Third Sonic Boom Prediction Workshop of the American Institute of Aeronautics and Astronautics. The simulation focuses on propagation to the ground of sonic boom generated by supersonic aircraft accounting for atmospheric effects. The simulation results use the NASA PCBoom propagation code that features the latest updates on the ray tube area and kinematic ray tracing algorithms to better predict waveforms and sonic boom carpet edges, respectively.

Explore related subjects

low boomsupersonic technologysonic boom propagationBurger's equation

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Joel B Lonzaga. Third Sonic Boom Prediction Workshop Cases: Analysis Using the NASA PCBoom. https://ntrs.nasa.gov/citations/20205003059

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRSDate not supplied

Aeroacoustic Computations of a Generic Low Boom Concept in Landing Configuration: Part 2 - Airframe Noise Simulations

Aeroacoustic simulations of a sub-scale, generic, low-boom supersonic aircraft model at low speeds were carried out using the Lattice-Boltzmann Very Large Eddy Simulation software PowerFLOW® and a Ffowcs Williams and Hawkings approach. The objective was to characterize the airframe noise signature of the configuration and determine the similarities and differences to conventional subsonic aircraft. We quantified the noise produced by the flap and landing gear by simulating the aircraft with and without deployment of these components. Mach number scaling of the far-field noise levels was examined by performing simulations at different flow speeds. We demonstrate that a solid surface formulation does not capture the aircraft acoustic field properly, while a carefully constructed permeable surface formulation yields far-field spectra that compare very favorably to results from direct probing of the simulated flow field.

low boom↗
NASA NTRSDate not supplied

Aeroacoustic Computations of a Generic Low Boom Concept in Landing Configuration: Part 1 - Aerodynamic Simulations

Computational results are presented for a 15%-scale, full-span, generic low-boom concept aircraft model simulated as installed in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel and in free-air conditions. The simulations were conducted with the lattice Boltzmann solver PowerFLOW® to capture the time-accurate characteristics of the flow. The aerodynamic behavior of the aircraft was investigated with various combinations of flap and landing gear deployments. To replicate the flow speed used during tests of the model, a Mach number of approximately 0.20 was chosen while varying the angle of attack through a limited range. Analyses were performed on local flow quantities, global forces, as well as flow distributions between configurations. Aerodynamic quantities were shown to be sensitive to mesh resolution levels, especially with flap and landing gear systems retracted. When comparing wind tunnel to free-air simulations, the aerodynamic quantities sampled were found to be in good agreement, suggesting that tunnel blockage and model support effects did not adversely impact the aerodynamic behavior of the model during the wind tunnel test. The results of this study improve our understanding of the highly complex, vortical flow generated by configurations with swept, low aspect-ratio wings at speeds encountered during landing operations.

low boom↗