Electrodynamic Dust Shield Testing on the Materials on International Space Station Experiment 11

Michael R Johansen; Michael A Dupuis; James R Phillips III; Joel D Malissa; Jerry J Wang; Michael D Hogue; Carlos I Calle

NASA NTRS · 20205006073

Electrodynamic Dust Shield Testing on the Materials on International Space Station Experiment 11

Michael R Johansen·Michael A Dupuis·James R Phillips III·Joel D Malissa·Jerry J Wang·Michael D Hogue·Carlos I Calle

Abstract

Dust is a major concern for lunar exploration. To combat the effects of dust, NASA, academia, and industry are developing solutions to the dust problem. One potential technology solution for this problem is the Electrodynamic Dust Shield (EDS). Many years of research and development have gone into this technology. The Materials on International Space Station Experiment – 11 (MISSE-11) provides a long term space exposure platform for this technology to verify compatibility of materials and manufacturing processes to the space environment. The MISSE-11 EDS experiment consists of 12 EDS panels. These panels are made of glass, polyimide, or prototype spacesuit fabric. Some panels are covered with a lotus leaf coating while others are covered with thermal paint. They are flown in the wake position of the ISS to simulate the lunar environment. Two panels are in an active configuration and are energized with a high voltage power supply, which generates high-voltage pulses to activate the dust shields. Current and voltage data are recovered from each of these trials to compare to baseline data. Also, each of the EDS panels are imaged on a monthly basis to track any changes with time that may occur with the EDS variants. In this paper, we report preliminary data and analysis from this spaceflight experiment.

Explore related subjects

Electrostatics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Michael R Johansen, Michael A Dupuis, James R Phillips III, Joel D Malissa, Jerry J Wang, Michael D Hogue, Carlos I Calle. Electrodynamic Dust Shield Testing on the Materials on International Space Station Experiment 11. https://ntrs.nasa.gov/citations/20205006073

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2025

Microtearing stability and turbulence in the pedestal: Linear gyrokinetics, reduced models, and nonlinear turbulent transport

Microtearing modes can play a crucial role in electron heat transport in tokamak plasmas, affecting both energy confinement and overall performance. This study investigates microtearing modes (MTM) stability and turbulence in a JET pedestal through gyrokinetic simulations using the Gene code, complemented by a reduced eigenvalue model. The focus is on how MTM properties depend on key plasma parameters, including collisionality and plasma beta β—the ratio of plasma pressure to magnetic pressure—the normalized toroidal wavenumber k y ρ s ⁠, where ρ s denotes the ion sound gyroradius (typically a few millimeters in edge plasmas) and isotope mass. Collisionality enhances MT growth rates, while increasing β leads to a shift from MTMs to kinetic-ballooning modes, typically for k y ρ s ⁠, where ρ s ≲ 0.2⁠. A purely collisionless branch of MTMs persists at low k y ρ s ⁠, where ρ s with distinctive properties including non-negligible particle flux and ion thermal transport. Isotope mass scans reveal modest reduction of MTM growth rates as ion mass decreases. Nonlinear simulations produce experimentally relevant transport levels. Numerical experiments turning off zonal flows and fields identify the critical role of zonal flows and zonal fields in regulating MTM turbulence. Their removal leads to a significant increase in electron heat flux. These findings provide new insight into MTM-driven transport and its impact on tokamak confinement and lay a foundation for reduced modeling and predictive capabilities.

Electrostatics↗

DOE OSTI2025

Global gyrokinetic simulations of kinetic-ballooning-mode turbulence in Wendelstein 7-X

We apply the global gyrokinetic code GENE-3D to perform kinetic-ballooning-mode (KBM) turbulence simulations in the Wendelstein 7-X (W7-X) stellarator using experimentally relevant parameters. In contrast to the flux-tube approach, we observe saturation of the turbulent fluctuations at finite amplitude. Analyzing the turbulent characteristics, we identify the presence of weakly driven KBM turbulence hybridizing with ion-temperature-gradient and trapped-electron-mode turbulence in the scenario under consideration, showing that it is possible that KBM activity can be driven in W7-X, opening up the path for studying this type of turbulence, which is highly relevant for future fusion power plants.

Electrostatics↗

NASA NTRS2014

Spacecraft Charging Issues for Launch Vehicles

Spacecraft charging is well known threat to successful long term spacecraft operations and instrument reliability in orbits that spend significant time in hot electron environments. In recent years, spacecraft charging has increasingly been recognized as a potentially significant engineering issue for launch vehicles used to deploy spacecraft using (a) low Earth orbit (LEO), high inclination flight trajectories that pass through the auroral zone, (b) geostationary transfer orbits that require exposures to the hot electron environments in the Earths outer radiation belts, and (c) LEO escape trajectories using multiple phasing orbits through the Earths radiation belts while raising apogee towards a final Earth escape geometry. Charging becomes an issue when significant areas of exposed insulating materials or ungrounded conductors are used in the launch vehicle design or the payload is designed for use in a benign charging region beyond the Earths magnetosphere but must survive passage through the strong charging regimes of the Earths radiation belts. This presentation will first outline the charging risks encountered on typical launch trajectories used to deploy spacecraft into Earth orbit and Earth escape trajectories. We then describe the process used by NASAs Launch Services Program to evaluate when surface and internal charging is a potential risk to a NASA mission. Finally, we describe the options for mitigating charging risks including modification of the launch vehicle andor payload design and controlling the risk through operational launch constraints to avoid significant charging environments.

Electrostatics↗