NASA NTRS · 20205006215
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Darius F Yaghoubi. Emerging Technologies for Mars Exploration: Mars Ascent Vehicle. https://ntrs.nasa.gov/citations/20205006215
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
In many human Mars exploration architectures, a Mars Ascent Vehicle (MAV) is used at the end of a surface stay to transport crew from the Martian surface to a waiting in-space transportation vehicle. It is possible for this transportation vehicle to be placed in any of several different Mars orbits, the selection of which drives the flight duration of the MAV from launch to docking and the amount of propellant required on the transportation vehicle to reach the same orbit. This paper identifies existing NASA standards and supplies habitability subject matter expert recommendations for the human habitation capabilities of the MAV as a function of flight duration. Living and working functions that may potentially be carried aboard a MAV are assessed. Flight durations considered include up to 8 hours, 8-24 hours, 1-2 days, 2-3 days, 3-4 days, and 4-7 days, which book end flight durations necessary to reach the transportation vehicle at different possible Mars orbits. This analysis will determine if there are key durations that serve as significant break points in required MAV capability.
Explore the source record for details and available documents.
The primary mission of the NASA Mars Sample Return (MSR) Campaign is to return samples of the Martian surface to Earth for scientific study. As part of this campaign, NASA is developing a Mars Ascent Vehicle (MAV). This vehicle must survive an approximate two-year journey to the Martian surface as a payload aboard a separate lander spacecraft. After residing on the surface for another year, the MAV will carry a payload of samples into orbit. From there, following ejection from the MAV, the samples will rendezvous with an Earth return spacecraft for capture, and ultimately, return to Earth. The design of the MAV represents a number of unique challenges, as no launch vehicle has ever left the surface of a planet other than Earth. Although conceptual designs for a MAV have been in various levels of development since the 1970s, none have achieved the level of fidelity and support that exists in the current MSR-MAV design. Early MSR-MAV concept studies examined multiple methods of propulsion, ultimately deciding that a Two-Stage-to-Orbit (TSTO) solid propulsion vehicle would provide the most capable performance in a Martian environment. Following this key architecture decision, the vehicle design was further matured to a Solid-Solid Guided-Guided (SSGG) architecture for NASA Key Decision Point A (KDP-A). Although the SSGG design was able to meet all mission constraints, concerns were raised regarding limited mass margin on other elements of the MSR campaign at such an early phase. A design challenge was issued to reduce MAV total mass by as much as possible. It was ultimately determined that by moving a number of components of the vehicle second stage to the first stage, the overall vehicle mass could be reduced significantly. The new design features a much smaller and completely unguided second stage. This paper describes the resultant Solid-Solid Guided-Unguided (SSGU) MAV design concept developed as part of the Systems Requirement Cycle (SRC). This design was developed primarily by NASA Marshall Space Flight Center (MSFC), in association with NASA Jet Propulsion Laboratory (JPL) and NASA Langley Research Center (LaRC). The TSTO vehicle includes one solid rocket motor per stage. As the vehicle second stage is unguided, it features spin-stabilization to maintain vehicle stability during flight. An electromechanically actuated Thrust Vector Control (TVC) system and a monopropellant Reaction Control System (RCS) are employed for active guidance on the first stage. The vehicle is designed to deliver up to 0.47kg of Martian samples to a Mars circular orbit of 380km at 27° inclination. Due to the extremely unique design constraints of this mission, and a recent transition to a Risk Class A posture, the MAV team was compelled to devise unconventional solutions to the vehicle design. The detailed design and analysis of these subsystems and the vehicle as a whole are discussed in this paper relative to all of the engineering disciplines involved.