Search NASA⌕ Search

NASA NTRS · 20205010692

Developing a Daily Metabolic Rate Profile for Human Exploration Missions

Abstract

Loads imposed on the Environmental Control and Life Support System (ECLSS) of human spacecraft can be greatly affected by the activity level of the crew. Water vapor, sensible heat and carbon dioxide outputs are all affected by instantaneous and average metabolic rates. This is especially true when rigorous exercise is required during extended missions to maintain astronaut health and performance. Thus an appropriate metabolic rate profile based on mission duration as well as other factors is an important design driver for the ECLSS. These factors are discussed and updated based on NASA’s latest exploration plans and data from ground testing involving human subjects. Some of the most significant updates from past metabolic rate profiles used by NASA are increased moisture from sweat, increased carbon dioxide due to longer exercise duration, and consideration of a wider range of crew body size and increased fitness levels.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Michael K Ewert, Meghan E Downs, John F Keener. Developing a Daily Metabolic Rate Profile for Human Exploration Missions. https://ntrs.nasa.gov/citations/20205010692

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

An Investigation into the Effect of Liquid Accumulation on Thermo-Physiologic State using an Advanced Moisture Model Coupled with a High Resolution Human Thermal Model

A physics-based mathematical model for simulating heat and moisture transport on the skin and within clothing was developed to improve the accuracy of human thermal modeling predictions. In a previous study, a set of sweating hotplate experiments was specifically created to obtain test data for model validation. The clothing moisture model was subsequently coupled with a human thermal model and tested by simulating human experiments described in the open literature, which served to verify the model’s ability to predict whole body thermo-physiologic state in work-rest cycles during which sweating was known to occur. In this study, a human subject test was specifically designed to validate the model’s ability to predict local and whole body sweat evaporation and accumulation on the surface of the body. The human subject test incorporated twelve clothed male subjects of moderate physical fitness, ages 18-30, which were prescribed a work-rest cycle in a climate-controlled chamber (25 °C, 50% RH). Two activity levels were considered during the active stage (4 MET vs. 6.5 MET), and two sets of ending ambient conditions were considered for the final rest stage (25 °C vs. 15 °C, 50% RH). Model predictions were compared to the measured local skin temperatures, core temperatures, and whole body sweat losses. In general, the model was able to reproduce the trends observed in the human subject trial, but more importantly, provided insight into how dynamic changes in liquid content can impact the evolution of local and whole body thermo-physiologic state. This study demonstrates the ability of an advanced moisture model to capture distinct physics attributable to moisture accumulation, allowing for increased accuracy in predicting human thermal state and for interpreting the results of measurements derived from human subject tests.

human thermal model↗