Search NASA⌕ Search

NASA NTRS · 20210015372

Trapped Waves and Screech Tones With Various Rectangular Nozzles

Abstract

This report documents experimental observations made on ‘trapped waves’ occurring with various convergent, rectangular nozzles. Most of the data pertain to three nozzles of aspect ratios (AR) 2, 4 and 8, each having an equivalent diameter of 2.12 in. The trapped waves, manifesting as a series of peaks in the near field pressure fluctuation spectra, are seen with all three nozzles. The number of spectral peaks detected on the major axis is larger than that detected on the minor axis by a factor approximately equal to the AR. These spectral peaks occur in high subsonic conditions and persist into the supersonic regime. Screech tones seem to appear as a continuation of these spectral peaks, i.e., with increasing Mach number it is as if one of these peaks gets amplified and turns into the screech tone. This trend is clearer at smaller AR and gets somewhat obscured at higher AR. Screech frequency variation with Mach number is documented for these and other rectangular nozzles, covering an AR range of 1-16. For larger AR (≥ 3), screech frequency is found to scale on the narrow dimension of the nozzle. Screech staging behavior is more pronounced for smaller AR cases. The screech frequency data for the AR=1 (square) case involves multiple stages similar to that of a round nozzle.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K B M Q Zaman, A F Fagan. 2021-05-21. Trapped Waves and Screech Tones With Various Rectangular Nozzles. https://ntrs.nasa.gov/citations/20210015372

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Optimization of Plug Nozzles Using CFD Informed Design Space Querying

This paper presents an axisymmetric CFD approach based on Reynolds-averaged Navier-Stokes (RANS) calculations for the shape optimization of plug nozzle contours for both supersonic cruise and landing/takeoff (LTO) conditions. Three key external plug design parameters were defined as independent variables in the optimization scheme, while nozzle performance was evaluated using thrust coefficient (Cfg) and discharge coefficient (Cd) as the primary dependent variables. By varying these parameters, a wide range of axisymmetric conic section plug profiles can be achieved, simplifying the problem. The paper also discusses the supersonic plug nozzle optimization approach, design space seeding, meshing, and CFD simulations for the optimization process. The results demonstrate that the approach is effective in exploring the parameter space and reducing computational expenses, making it a viable option for optimizing nozzle plug contours. Using this optimization toolchain, the study yielded preliminary designs for LTO, cruise, and LTO-cruise balanced plug nozzles.

nozzles↗