Parametric Study of the Forward Attachment Geometry for the Space Launch System Next Generation Booster

J. Micheal Ramey; Ian Giles; Oleg Goushcha; Patrick S. Heaney; David J. Piatak; Martin K. Sekula; Francesco Soranna

NASA NTRS · 20220018082

Parametric Study of the Forward Attachment Geometry for the Space Launch System Next Generation Booster

J. Micheal Ramey·Ian Giles·Oleg Goushcha·Patrick S. Heaney·David J. Piatak·Martin K. Sekula·Francesco Soranna

Abstract

Launch vehicle transonic buffet environments can generate large dynamic structural loads and vibratory responses. For the Space Launch System (SLS) vehicle, the highest transonic buffet environments have been observed in the multibody region between the core and solid rocket boosters, particularly downstream of the booster forward attachment. The buffet environment is particularly sensitive to the outer mold line (OML) of the forward attachment, and even relatively minor geometry changes can have large impacts on buffet and other aerodynamic environments. The SLS program is redesigning the booster for the Block 2 vehicle to support updated mission goals. This redesign necessitated changes in the forward attachment geometry, which raised concerns about the buffet and vibroacoustic environments. A preliminary study was conducted that developed multiple forward attachment geometries that satisfied the programmatic requirements, but the aerodynamic environment impacts were unclear. In March 2022, a wind-tunnel test was conducted at the NASA Ames 11- by 11-foot Transonic Wind Tunnel to study these environments generated from each of the configurations in order to select the most viable candidate. This paper will discuss this test campaign, the results from the parametric study, as well as general observations regarding OML features that impact the buffet environment. Buffet environments will be presented and compared for each configuration and comparisons presented where applicable.

Explore related subjects

buffet launch vehicles testing wind-tunnel

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

J. Micheal Ramey, Ian Giles, Oleg Goushcha, Patrick S. Heaney, David J. Piatak, Martin K. Sekula, Francesco Soranna. Parametric Study of the Forward Attachment Geometry for the Space Launch System Next Generation Booster. https://ntrs.nasa.gov/citations/20220018082

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2023

Space Launch System Unsteady Forces Developed from Unsteady-Pressure-Sensitive-Paint–Based Corcos Model Parameters

During atmospheric ascent, launch vehicles (LVs) experience large dynamic loads at transonic conditions where aerodynamic buffet is most critical. To estimate buffet loads, coupled loads analyses typically utilize suitable forcing functions, called buffet forcing functions (BFFs). One of the key buffet environment contributors is the turbulent boundary layer (TBL) on the LV outer skin. The TBL-induced fluctuating pressures can be estimated using the widely-accepted Corcos model. In the context of transonic buffet, the performance of this model is not well established, partly because of lack of data. To fill this gap, NASA recently acquired extremely high-spatial-density data for the Space Launch System (SLS) vehicle, using the unsteady pressure sensitive paint (uPSP) optical measurement technique. A methodology is developed for validation of the Corcos model using these unique data, with a focus on the LV-design application. The model hypotheses are verified and the model parameters are empirically tuned. For selected panels on the vehicle, BFF coherence factors are derived based on the Corcos model and the associated panel BFFs are compared to uPSP data. It is shown that the modeled BFFs are in agreement with direct integration of uPSP data, except for regions where pressure fluctuations are spatially nonuniform. In those regions, the Corcos-based BFFs exhibit inherent limitations of BFF estimation methods that rely on discrete pressure measurements.

buffet↗

NASA NTRS2017

Wavenumber-frequency Spectra of Pressure Fluctuations on a Generic Space Vehicle Measured via Unsteady Pressure-Sensitive Paint

Time histories of pressure fluctuations on a generic, hammerhead space vehicle model were measured using unsteady Pressure-Sensitive Paint (uPSP). The test was conducted in the 11-foot transonic wind tunnel of NASA Ames Research Center over a Mach number range of 0.6 M 1.2, and angles of attack of -4 4. The model was coated with a porous binder and PtTFPP-based porous polymer paint. An elaborate system of four high-speed cameras, and forty LED lamps was used for image acquisition. Various steps for image registration, reduction of shot noise, photogrammetry procedure to map images from the four cameras on a grid for the model, and finally a calibration procedure to convert the measured fluctuations in light intensity to fluctuating pressure, are discussed in the paper. The calibration process using a set of unsteady pressure sensors mounted on the model, was found to overcome some of the inherent problems of the fast response paint, such as rapid photo-degradation, non-linearity in pressure response, and significant temperature sensitivity. Comparison of spectra of pressure fluctuations between UPSP and pressure sensors demonstrated the ability of the paint to faithfully follow fluctuations up to 10 kHz, the maximum attempted. It was also found that the camera bit-depth and the illumination level limited the lowest measurable levels of pressure fluctuations to around 140dB. The large data set exposed various critical transonic flow physics not seen before, such as a coupling of the shock motion on the Payload Fairing (PF) with the separated flow region on the upper stage of the launch vehicle, and upstream convection of pressure fluctuation on PF at certain Mach numbers. The data also confirmed the expectation of a general lowering of the coefficient of pressure fluctuation with Mach number. The availability of the data set on a dense, regularly-spaced, surface grid allowed for the calculation of wavenumber-frequency (k-) spectra via straightforward applications of Fourier transform. The k- spectra were compared for the separated flow regions on the Second Stage, and the shock-boundary layer interactions on PF. The former showed self-similarity with Mach number while the latter was distinctly different, and confirmed the upstream propagation of pressure fluctuations. The k- spectra were dominated by the convected fluctuations; the acoustic domain was not discernable. These data, valuable for the vibro-acoustics analysis of aerospace vehicles, are believed to be the first obtained for the transonic flight regime, and pave the path for application on production models of aerospace vehicles.

buffet↗

NASA NTRSDate not supplied

Development of Buffet Functions using Frequency-Dependent Coherence Factors

Launch vehicle transonic buffet environments produce large fluctuating pressures on the surface of the vehicle. Transonic buffet occurs as a launch vehicle passes through the transonic regime, typically Mach 0.8 to 1.2, where phenomena such as flow separation and shock dynamics produce large fluctuating pressures. The unsteady aerodynamic forces produced by these phenomena can excite both global and local vehicle structural response. The consequences of incorporating poorly characterized buffet forces into the design process can range from inefficient structures that can reduce the vehicle capabilities to undersized structures that, in the worst case scenario, may result in structural failure (Refs. 1, 2, 3). It is thus imperative to appropriately characterize the transonic buffet environment.

buffet↗