Velocity Discontinuity Propagation Model Validation Using an Approximate Point Source in Motion

Christopher J. Bahr

Home/Archive/NASA NTRS

NASA NTRS · 20230007677

Velocity Discontinuity Propagation Model Validation Using an Approximate Point Source in Motion

Christopher J. Bahr

View original source ↗Export metadata ↓

Abstract

The classic geometric acoustic solution for propagation through a mean flow velocity discontinuity is evaluated experimentally using an approximate point source in motion. The geometric approximation of the pressure field in both the frequency and time domains is first revisited for arbitrary subsonic flow and source motion along the flow axis. The derivation, computed via the method of stationary phase, shows the expected Doppler behavior of the radiated acoustic field due to the source motion acting in conjunction with the convective amplification effect for a stationary source in flow. The model is validated with a minimally intrusive, approximate point source of heat in the Quiet Flow Facility at the NASA Langley Research Center. Within the limitations of the experiment in this open-jet wind tunnel, data generally show agreement with the model across a range of flow speeds and microphone positions for a broad range of frequencies. Where disagreement between measurement and theory is noted, possible causes are discussed.

Explore related subjects

wind tunnel testing facility characterization

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Christopher J. Bahr. 2023-05-15. Velocity Discontinuity Propagation Model Validation Using an Approximate Point Source in Motion. https://ntrs.nasa.gov/citations/20230007677

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2024

Ground Vibration Testing of the TiltRotor Aeroelastic Stability Testbed

This report is a summary of the ground vibration testing of the TiltRotor Aeroelastic Stability Testbed (TRAST). The U.S. Army has developed this new tiltrotor model system to validate whirl flutter stability analysis, a critical instability mechanism in this type of aircraft. As such, component-level vibration testing is critical to creating and validating analytical models. This report includes experimental vibration testing results from component level to the full model system. In addition, experimentally measured stiffness values are reported for key components of the model.

wind tunnel testing↗

NASA NTRS2015

Advancing Test Capabilities at NASA Wind Tunnels

NASA maintains twelve major wind tunnels at three field centers capable of providing flows at 0.1 M 10 and unit Reynolds numbers up to 45106m. The maintenance and enhancement of these facilities is handled through a unified management structure under NASAs Aeronautics and Evaluation and Test Capability (AETC) project. The AETC facilities are; the 11x11 transonic and 9x7 supersonic wind tunnels at NASA Ames; the 10x10 and 8x6 supersonic wind tunnels, 9x15 low speed tunnel, Icing Research Tunnel, and Propulsion Simulator Laboratory, all at NASA Glenn; and the National Transonic Facility, Transonic Dynamics Tunnel, LAL aerothermodynamics laboratory, 8 High Temperature Tunnel, and 14x22 low speed tunnel, all at NASA Langley. This presentation describes the primary AETC facilities and their current capabilities, as well as improvements which are planned over the next five years. These improvements fall into three categories. The first are operations and maintenance improvements designed to increase the efficiency and reliability of the wind tunnels. These include new (possibly composite) fan blades at several facilities, new temperature control systems, and new and much more capable facility data systems. The second category of improvements are facility capability advancements. These include significant improvements to optical access in wind tunnel test sections at Ames, improvements to test section acoustics at Glenn and Langley, the development of a Supercooled Large Droplet capability for icing research, and the development of an icing capability for large engine testing. The final category of improvements consists of test technology enhancements which provide value across multiple facilities. These include projects to increase balance accuracy, provide NIST-traceable calibration characterization for wind tunnels, and to advance optical instruments for Computational Fluid Dynamics (CFD) validation. Taken as a whole, these individual projects provide significant enhancements to NASA capabilities in ground-based testing. They ensure that these wind tunnels will provide accurate and relevant experimental data for years to come, supporting both NASAs mission and the missions of our government and industry customers.

wind tunnel testing↗

NASA NTRS2015

Improved Regression Analysis of Temperature-Dependent Strain-Gage Balance Calibration Data

An improved approach is discussed that may be used to directly include first and second order temperature effects in the load prediction algorithm of a wind tunnel strain-gage balance. The improved approach was designed for the Iterative Method that fits strain-gage outputs as a function of calibration loads and uses a load iteration scheme during the wind tunnel test to predict loads from measured gage outputs. The improved approach assumes that the strain-gage balance is at a constant uniform temperature when it is calibrated and used. First, the method introduces a new independent variable for the regression analysis of the balance calibration data. The new variable is designed as the difference between the uniform temperature of the balance and a global reference temperature. This reference temperature should be the primary calibration temperature of the balance so that, if needed, a tare load iteration can be performed. Then, two temperature{dependent terms are included in the regression models of the gage outputs. They are the temperature difference itself and the square of the temperature difference. Simulated temperature{dependent data obtained from Triumph Aerospace's 2013 calibration of NASA's ARC-30K five component semi{span balance is used to illustrate the application of the improved approach.

wind tunnel testing↗