Search NASASearch

NASA NTRS · 20230018631

James Webb Space Telescope Navigation Optimization Challenges

Abstract

This paper details the orbit determination, solar radiation pressure (SRP) modeling, and station-keeping maneuver planning for the NASA James Webb Space Telescope during the routine science phase of the mission. The complexities of SRP modeling driven by the vehicle’s large area, attitude profile, and attitude constraints for maneuver execution entail unique challenges for spaceflight navigation. The techniques utilized to combine predictive attitude and maneuver targeting modeling were refined using the experiences and data accumulated during and following the commissioning phase. The Navigation Team at NASA Goddard Space Flight Center’s Flight Dynamics Facility responded to these challenges and implemented methods for trajectory optimization and improving maneuver efficiency.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

James B. Logan, Ashok K. Verma, Sarah M. Cavanaugh, Andrew I. Yu. James Webb Space Telescope Navigation Optimization Challenges. https://ntrs.nasa.gov/citations/20230018631

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

A Guide to Forced Oscillation Data Processing and Analysis

The NASA Langley Research Center Flight Dynamics Branch has a long history of experimental testing of aircraft and spacecraft flight dynamics. One of the frequently used wind tunnel test methods is forced oscillation testing. This method involves a model mounted on a specialized dynamic test rig in a tunnel and oscillated about a body axis, typically at a fixed sinusoidal frequency and amplitude. This report provides the derivation of two commonly used data reduction methods and introduces one new method to extract the linear dynamic derivatives from forced oscillation wind tunnel data.

Flight Dynamics

Dynamic Aeroelastic Flight Dynamic Modeling of Mach 0.745 Transonic Truss-Braced Wing

This paper presents a modeling approach for dynamic aeroelastic flight dynamic analysis of the Mach0.745 Transonic Truss-Braced Wing. The modeling approach is based on a transonic correction method to correct the Theodorsen’s theory for transonic flow. CFD unsteady Reynolds-averaged Navier-Stokes equations (RANS) simulations are conducted using FUN3D solver for a series of wing sections from the Mach 0.745Transonic Truss-Braced Wing in pitch and plunge oscillations. Unsteady lift and pitching moment coefficients are obtained and used to develop the correction terms in the Theodorsen’s theory to account for transonic aerodynamics. The unsteady lift and pitching moment derivatives with respect to the unsteady angle of attack are obtained as functions of the reduced frequency. These derivatives are used to compute the unsteady lift and pitching moment contributions by the angle of attack, pitch rate, and roll rate. They are then approximated using a frequency-domain regression to obtain the dynamic stability derivatives for the Mach 0.745 Transonic Truss-Braced Wing. The structural dynamic mode shapes of the Mach 0.745 TTBW are extracted from a NAS-TRAN finite-element model. These mode shapes are used to compute the generalized unsteady aerodynamic forces. The aerodynamic mass, damping, and stiffness and the aerodynamic lag states are constructed to couple the dynamic aeroelastic contribution to the flight dynamic model of the Mach 0.745 Transonic Truss-Braced Wing. The coupled dynamic aeroelastic flight dynamic equations of motion are formulated. The eigenvalues of the coupled system are computed. All the flight dynamic modes and structural dynamic modes are stable at Match 0.745. The effect of transonic aerodynamics generally causes all the dynamic modes to have lower damping values

Flight Dynamics