Search NASA⌕ Search

NASA NTRS · 20240000477

Dynamic Orbital Slingshot for Rendezvous with Interstellar Objects

Abstract

The solar sail “statite” concept presents a potential means to study interstellar objects (ISOs). A new class of asteroids and comets, ISOs offer a unique scientific opportunity to answer fundamental scientific questions about the origin of solar system volatiles, the compositions of exo-solar systems, and the transfer rates of material between solar systems. Unfortunately, they are also challenging to study due to their high excess energies and the short lead time offered by present detection infrastructure. By using its solar sail to “hover” in place, a statite is able to await the discovery of an ISO and, when called upon, convert the enormous potential energy of its stationary state into the velocity necessary to rendezvous with the targeted comet or asteroid. The investigation completed in Phase I focused on establishing the viability of the proposed mission concept. To do so, optimal trajectories to the two known ISOs were demonstrated and the relationship between statite placement and the resulting trajectory was explored. Post-launch trajectories from the Earth to strategic statite states were also shown to be feasible. Concurrently with these efforts, a thorough review of published ISO population estimates was conducted and preliminary steps towards creating a database of synthetic ISO ephemerides were completed. If renewed for a Phase II, this will be used to characterize the capabilities of the statite concept.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Richard Linares. 2024-01-25. Dynamic Orbital Slingshot for Rendezvous with Interstellar Objects. https://ntrs.nasa.gov/citations/20240000477

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

StarNAV: An Architecture for Autonomous Spacecraft Navigation by the Relativistic Perturbation of Starlight

Exploration missions to the outer Solar System (e.g., Neptune, Kuiper belt objects) or to the interstellar medium present several challenges for conventional spacecraft designs. One of the greatest challenges is a means for navigation, as Earth-based tracking with the Deep Space Network (DSN) becomes less desirable due to high cost, decreased performance at long ranges, and long light-time delays. Indeed, light time delays at Neptune are over four hours (one way), making control of spacecraft during critical events nearly impossible—and this problem only becomes worse as we move to the Kuiper belt or to interstellar space. The need for autonomous spacecraft navigation is well established and is prominently featured in the 2015 NASA Technology Roadmap (e.g., TA 5.4.2.6 & 5.4.2.8). This has led to investment in various technologies to accomplish this task, with the majority of recent work focusing on optical navigation (OPNAV; TA 5.4.4.1) [1], X-ray pulsar navigation (XNAV; TA 5.6.1) [2], or DSN one-way ranging with the Deep Space Atomic Clock (DSAC; TA 5.4.1.1) [3]. This NIAC study suggests a new (and completely different) way of autonomously navigating a spacecraft anywhere in the Solar System or beyond. We call this new technique StarNAV.

NIAC Phase I↗

Heat-Exchange Driven Aircraft for Low Altitude and Surface Exploration of Venus: Phase 1 Study Final Report

Exploration of Venus below its clouds has long been impaired by the planet’s massive CO2 atmosphere, corrosive trace gases, and high opacity. Except for a few narrow spectral windows, the 20 km thick global cloud cover blocks light over the entirety of the ultraviolet through thermal infrared spectrum, impeding orbital studies of the surface and lower portion of the atmosphere. In addition to the cloud opacity, Rayleigh scattering through 80 bars of CO 2 in the lower 40 km of the atmosphere results in a Rayleigh scattering depth between 25 and1 in the visible through near infrared portion of the spectrum. That optically thick scattering, combined with the uniform angular distribution of the illumination provided by the highly diffusing clouds overhead greatly reduces even very large surface albedo contrasts (Crisp, pers. Comm.). To date, the surface has only been mapped via synthetic aperture radar by the Magellan mission at scales of 120 to 300 m/pixel. In addition to contributing to the difficulty of performing studies of the surface from orbit, the extreme temperatures and pressures at the surface also create a challenging environment to utilize a lander for exploration. The longest-lived lander on Venus’ surface survived for 2 hours. Hence, limited access to observe the surface and lower atmosphere of Venus arguably puts the surface and lower atmosphere of Venus as one of the least explored regions of the inner Solar System.

NIAC Phase I↗

NIAC Phase I Final Report Lunar South Pole Oxygen Pipeline (LSPOP)

The Lunar South Pole Oxygen Pipeline (LSPOP) Phase I NIAC, is to analyze the feasibility of constructing a pipeline at the Moon’s South Pole for transporting gaseous oxygen from point of generation to point of use. A lunar pipeline has never been pursued and will revolutionize lunar surface operations for the Artemis program and reduce cost and risk. Our starting concept is for a 5 km pipeline to transport oxygen gas from an oxygen production source, for example from our molten regolith electrolysis (MRE, currently at TRL 5, see references[1],[2],[3],[4],[5],[6] for technical discussions of the MRE process) extraction site, or any other source, to an oxygen storage/liquification plant near a lunar base. The pipeline is designed to: 1) be constructed robotically from regolith-derived metals with minimal material transferred from Earth, 2) be repairable robotically, 3) have an oxygen flow rate of ~2 kg/hour, which is commensurate with the NASA initial projected need of 10,000 kg/year, 4) operate with minimal power over the lifetime of the pipeline, with a goal of high operational reliability and the ability to survive in the lunar environment for > 10 years. We compare this concept to a pipeline concept with pipe produced on Earth and then transported to and assembled on the Moon. Both approaches will use earth-based compressors, valves, and fittings which are integrated into the pipeline on the Moon.

NIAC Phase I↗