Search NASA⌕ Search
Home/Archive/NASA NTRS

NASA NTRS · 20240004789

Learjet 25D Jet Noise Flyover Measurements: Comparisons with Scale-Model Data

Brenda S. Henderson·Lennart S. Hultgren
View original source ↗Export metadata ↓

Abstract

Continued interest in commercial supersonic flight has highlighted the need for accurate jet-noise predictions as jet noise is expected to be a dominant noise source for aircraft takeoff conditions. The current study compares the acoustic spectra obtained from a scale-model investigation to that from a Learjet 25D flyover test. Reasonable agreement was achieved between the scale-model and flight data in both peak level and frequency when the physical scale factor for the scale-model was increased by roughly 6%. The peak perceived noise levels (PNL) for the flight data were between 1.29 dB and 1.65 dB higher than those for the scale model. The roll-off of PNL with time for large emission angles was greater for the flight data than for the scale-model data. Using a distributed source model for shear-layer-refraction corrections to the scale-model data slightly improved comparisons to flight data at low frequencies for emission angles near 70° and between 110° and 130°. Distributed source models had no impact on the scale-model spectra near the peak jet-noise angle. Applying a stretching factor to the distributed source models to capture the effects of a flight stream had a very limited impact on the computed spectra.

Explore related subjects

AcousticsFlight TestJet Noise

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Brenda S. Henderson, Lennart S. Hultgren. Learjet 25D Jet Noise Flyover Measurements: Comparisons with Scale-Model Data. https://ntrs.nasa.gov/citations/20240004789

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2025

Investigating the Relationship Between Bolide Entry Angle and Apparent Direction of Infrasound Signal Arrivals

Infrasound sensing offers critical capabilities for detecting and geolocating bolide events globally. However, the observed back azimuths, directions from which infrasound signals arrive at stations, often differ from the theoretical expectations based on the bolide’s peak brightness location. For objects with shallow entry angles, which traverse longer atmospheric paths, acoustic energy may be emitted from multiple points along the trajectory, leading to substantial variability in back azimuth residuals. This study investigates how the entry angle of energetic bolides affects the back azimuth deviations, independent of extrinsic factors such as atmospheric propagation, station noise, and signal processing methodologies. A theoretical framework, the Bolide Infrasound Back-Azimuth EXplorer Model (BIBEX-M), was developed to compute predicted back azimuths solely from geometric considerations. The model quantifies how these residuals vary as a function of source-to-receiver distance, revealing that bolides entering at shallow angles, e.g., 10°, can produce average residuals of 20°, with deviations reaching up to 46° at distances below 1000 km, and remaining significant even at 5000 km (up to 8°). In contrast, bolides with steeper entry angles, e.g., > 60°, show smaller deviations, typically under 5° at 1000 km and diminishing to less than ~1° beyond 5000 km. These findings attest to the need for careful interpretation when evaluating signal detections and estimating bolide locations. This work is not only pertinent to bolides but also to other high-energy, extended-duration atmospheric phenomena such as space debris and reentry events, where similar geometric considerations can influence infrasound arrival directions.

Acoustics↗
NASA NTRS2024

UAM Source Noise Hemisphere Flight Test Measurement Protocol

The overall goal of the NASA Urban Air Mobility Noise Working Group (UNWG) Ground and Flight Test Subgroup (SG2) is to develop a research measurement protocol, or set of guidelines, which can be used to adequately quantify the Urban Air Mobility (UAM) community noise impact via the creation of acoustic profiles that describe the vehicle source emission characteristics. This document lays out a measurement protocol for acquiring data suitable for the development of compact noise hemispheres that characterize the source acoustic emissions from full-scale UAM or Advanced Air Mobility (AAM) vehicles in outdoor flight. It also provides a narrative describing the numerous aspects of outdoor flight test design and execution that will hopefully prove useful to flight test engineers and practitioners.

Acoustics↗