NASA NTRS · 20250000779
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Jason Reynolds. Nuclear Fuel Development for Nuclear Thermal Propulsion. https://ntrs.nasa.gov/citations/20250000779
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Theranostic strategies that utilize f-block therapeutic radionuclides, including 161 Tb, 177 Lu, 225 Ac, and 227 Th, suffer from a shortage of positron emission tomography (PET) imaging counterparts in the same chemical space and often rely on 68 Ga as a surrogate. The 140 Nd/ 140 Pr in vivo PET generator, which belongs to the f-block, may address this issue and can be produced via the 141 Pr(p,2n) 140 Nd production route by using medium-energy cyclotrons. However, impurities in the target material, including stable Nd, and the inherent difficulty of adjacent lanthanide separations limit the achievable radionuclidic and chemical purity of 140 Nd. In this work, we address these challenges through the purification and recycling of praseodymium target material and optimization of Nd/Pr separation. The resulting purified 140Nd was evaluated using DOTA and Macropa chelators via radiolabeling and in vitro stability studies. A target material purification and recycling method was developed for the monoisotopic 141 Pr starting material to remove stable Nd impurities, yielding 90.3 ± 4.7% (n = 3) recovery. The purified 141 Pr was isolated as Pr 6 O 11 and irradiated with 24 MeV protons (20.07 MeV at the target surface) at 20 μA for 4 h, which produced 1417.0 ± 83.4 MBq (38.3 ± 2.2 mCi) of 140 Nd at the end of bombardment (EOB). The produced 140 Nd was purified through an optimized DGA normal method to recover 71.6 ± 6.3% pure 140 Nd. The amount of stable Nd reduced progressively in each target purification cycle from >340 ppm without purification to <250 ppb after three cycles, while other measured metallic impurities were below 30 ppb. This improvement in target purity was reflected in the direct increase of apparent molar activity (AMA), when purified 140 Nd was evaluated with DOTA and Macropa chelators. AMA of [ 140 Nd]Nd-DOTA and [ 140 Nd]Nd-Macropa increased from 70.3 MBq/μmol (1.9 mCi/μmol) and 74 MBq/μmol (2.0 mCi/μmol) to 8025.3 MBq/μmol (216.9 mCi/μmol) and 8473.0 MBq/μmol (229.0 mCi/μmol), respectively, after the third target purification cycle. Further evaluation of chelator-labeled 140 Nd showed that [ 140 Nd]Nd-DOTA was stable in phosphate-buffered saline (PBS), saline, human serum, and mouse serum, whereas [140Nd]Nd-Macropa was stable in all except human serum. This work established a practical methodological advance for the production of 140 Nd/ 140 Pr in vivo PET generators, combining optimized target recycling and radiochemical separation to enable scaled-up and high-molar activity 140 Nd suitable for preclinical imaging. These advances support broader development of 140 Nd/ 140 Pr as a robust PET analogue, especially for f-block therapeutics.
Heterophase black titanium dioxide (hB-TiO 2 ), characterized by broadened near-infrared (NIR) absorption, has emerged as a promising photothermally active nanomaterial. This study focused on the synthesis of nanoscale hB-TiO 2 and its evaluation as a multifunctional agent for photothermal therapy (PTT). The purity and composition of the mixed-phase nanoscale hB-TiO 2 were demonstrated by X-ray diffraction, and the morphology of nanoparticles was imaged by transmission electron microscopy. Extensive additional characterization was conducted to validate the optoelectronic properties. The material was further evaluated in biological systems using NIH 3T3-GFP fibroblasts and the fungus Candida albicans. Nanoscale hB-TiO 2 exhibited good biocompatibility in the absence of laser irradiation and effectively ablated both NIH 3T3-GFP cells and C. albicans following 20 min of laser exposure. This noninvasive treatment strategy leverages NIR-responsive materials to induce localized hyperthermia. The findings provide grounds for the use of selectively induced hyperthermia, which could be employed for the targeted destruction of cells or fungi with minimal impact on surrounding tissue if the material is functionalized with specific targeting groups and delivered to cells or fungal infections.