Search NASA⌕ Search

DOE OSTI · 1019732

Structure and Dynamics for LiBH4-LiCl Solid Solutions

Abstract

A surprisingly high degree of structural and compositional dynamics is observed in the system LiBH{sub 4}-LiCl as a function of temperature and time. Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data reveals that Cl{sup -} readily substitutes for BH{sub 4}{sup -} in the structure of LiBH{sub 4}. Prolonged heating a sample of LiBH{sub 4}-LiCl (1:1 molar ratio) above the phase transition temperature and below the melting point (108 < T < 275 C) can produce highly chloride substituted hexagonal lithium borohydride, h-Li(BH{sub 4}){sub 1-x}Cl{sub x}, e.g., x {approx} 0.42, after heating from room temperature (RT) to 224 C at 2.5 C/min. LiCl has a higher solubility in h-LiBH{sub 4} as compared to orthorhombic lithium borohydride, o-LiBH{sub 4}, which is illustrated by a LiBH{sub 4}-LiCl (1:1) sample equilibrated at 245 C for 24 days and left at RT for another 13 months. Rietveld refinement reveals that this sample contains o-Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} and LiCl. This illustrates a significantly faster dissolution of LiCl in h-LiBH{sub 4} as compared to a slower segregation of LiCl from o-LiBH{sub 4}, which is also demonstrated by in situ SR-PXD from three cycles of heating and cooling of the same Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} sample. The substitution of the smaller Cl{sup -} for the larger BH{sub 4}{sup -} ion is clearly observed as a reduction in the unit cell volume as a function of time and temperature. A significant stabilization of h-LiBH{sub 4} is found to depend on the degree of anion substitution. Variable temperature solid-state magic-angle spinning (MAS) {sup 7}Li and {sup 11}B NMR experiments on pure LiBH{sub 4} show an increase in full width at half maximum (fwhm) when approaching the phase transition from o- to h-LiBH{sub 4}, which indicates an increase of the relaxation rate (i.e., T{sub 2} decreases). A less pronounced effect is observed for ion-substituted Li(BH{sub 4}){sub 1-x}Cl{sub x}, 0.09 < x < 0.42. The MAS NMR experiments also demonstrate a higher degree of motion in the hexagonal phase, i.e., fwhm is reduced by more than a factor of 10 at the o- to h-LiBH{sub 4} phase transition.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Arnbjerg, L, Ravnsbak, D, Filinchuk, Y, Vang, R, Cerenius, Y, Besenbacher, F, Jorgensen, J, Jakobsen, H, Jensen, T. 2009-01-01. Structure and Dynamics for LiBH4-LiCl Solid Solutions. https://doi.org/10.1021/cm902013k

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗